[PATCH] Input: add appleir USB driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bastien Nocera <hadess@xxxxxxxxxx>

This driver was originally written by James McKenzie, updated by
Greg Kroah-Hartman, further updated by myself, with suspend support
added.

More recent versions of the IR receiver are also supported through
a patch by Alex Karpenko.

Tested on a MacbookAir1,1

Signed-off-by: Bastien Nocera <hadess@xxxxxxxxxx>
---
 Documentation/input/appleir.txt |   46 ++++
 drivers/hid/hid-apple.c         |    4 -
 drivers/hid/hid-core.c          |    5 +-
 drivers/hid/hid-ids.h           |    1 +
 drivers/input/misc/Kconfig      |   13 +
 drivers/input/misc/Makefile     |    1 +
 drivers/input/misc/appleir.c    |  477 +++++++++++++++++++++++++++++++++++++++
 7 files changed, 541 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/input/appleir.txt
 create mode 100644 drivers/input/misc/appleir.c

diff --git a/Documentation/input/appleir.txt b/Documentation/input/appleir.txt
new file mode 100644
index 0000000..0aaf5fe
--- /dev/null
+++ b/Documentation/input/appleir.txt
@@ -0,0 +1,46 @@
+Apple IR receiver Driver (appleir)
+----------------------------------
+	Copyright (C) 2009 Bastien Nocera <hadess@xxxxxxxxxx>
+
+The appleir driver is a kernel input driver to handle Apple's IR
+receivers (and associated remotes) in the kernel.
+
+The driver is an input driver which only handles "official" remotes
+as built and sold by Apple.
+
+Authors
+-------
+
+James McKenzie (original driver)
+Alex Karpenko (05ac:8242 support)
+Greg Kroah-Hartman (cleanups and original submission)
+Bastien Nocera (further cleanups and suspend support)
+
+Supported hardware
+------------------
+
+- All Apple laptops and desktops from 2005 onwards, except:
+  - the unibody Macbook (2009)
+  - Mac Pro (all versions)
+- Apple TV (all revisions)
+
+The remote will only support the 6 buttons of the original remotes
+as sold by Apple. See the next section if you want to use other remotes
+or want to use lirc with the device instead of the kernel driver.
+
+Using lirc (native) instead of the kernel driver
+------------------------------------------------
+
+First, you will need to disable the kernel driver for the receiver.
+
+This can be achieved by passing quirks to the usbhid driver.
+The quirk line would be:
+usbhid.quirks=0x05ac:0x8242:0x08
+
+With 0x05ac being the vendor ID (Apple, you shouldn't need to change this)
+With 0x8242 being the product ID (check the output of lsusb for your hardware)
+And 0x08 being "HID_CONNECT_HIDDEV"
+
+This should force the creation of a hiddev device for the receiver, and
+make it usable under lirc.
+
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 4b96e7a..d1fdcd0 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -353,10 +353,6 @@ static void apple_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id apple_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL),
-		.driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4),
-		.driver_data = APPLE_HIDDEV | APPLE_IGNORE_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE),
 		.driver_data = APPLE_MIGHTYMOUSE | APPLE_INVERT_HWHEEL },
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 80792d3..61b199e 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1250,8 +1250,6 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
 static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
@@ -1540,6 +1538,9 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3839340..8b29a88 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -90,6 +90,7 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS	0x0238
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
+#define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240
 #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
 #define USB_DEVICE_ID_APPLE_IRCONTROL4	0x8242
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 16ec523..4340986 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -149,6 +149,19 @@ config INPUT_KEYSPAN_REMOTE
 	  To compile this driver as a module, choose M here: the module will
 	  be called keyspan_remote.
 
+config INPUT_APPLEIR
+	tristate "Apple infrared receiver (built in)"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  Say Y here if you want to use a Apple infrared remote control. All
+	  the Apple computers from 2005 onwards include such a port, except
+	  the unibody Macbook (2009), and Mac Pros. This receiver is also
+	  used in the Apple TV set-top box.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called appleir.
+
 config INPUT_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a8b8485..041e6f5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -5,6 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
+obj-$(CONFIG_INPUT_APPLEIR)		+= appleir.o
 obj-$(CONFIG_INPUT_ATI_REMOTE)		+= ati_remote.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
diff --git a/drivers/input/misc/appleir.c b/drivers/input/misc/appleir.c
new file mode 100644
index 0000000..6e332ab
--- /dev/null
+++ b/drivers/input/misc/appleir.c
@@ -0,0 +1,477 @@
+/*
+ * appleir: USB driver for the apple ir device
+ *
+ * Original driver written by James McKenzie
+ * Ported to recent 2.6 kernel versions by Greg Kroah-Hartman <gregkh@xxxxxxx>
+ *
+ * Copyright (C) 2006 James McKenzie
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@xxxxxxxxx>
+ * Copyright (C) 2008 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#define DRIVER_VERSION "v1.2"
+#define DRIVER_AUTHOR "James McKenzie"
+#define DRIVER_DESC "Apple infrared receiver driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_APPLE			0x05ac
+#define USB_DEVICE_ID_APPLE_IRCONTROL		0x8240
+#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL	0x8241
+#define USB_DEVICE_ID_APPLE_IRCONTROL4		0x8242
+
+#define URB_SIZE	32
+
+#define MAX_KEYS	8
+#define MAX_KEYS_MASK	(MAX_KEYS - 1)
+
+#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+struct appleir {
+	struct input_dev *input_dev;
+	u8 *data;
+	dma_addr_t dma_buf;
+	struct usb_device *usbdev;
+	unsigned int flags;
+	struct urb *urb;
+	int timer_initted;
+	struct timer_list key_up_timer;
+	int current_key;
+	char phys[32];
+};
+
+static DEFINE_MUTEX(appleir_mutex);
+
+enum {
+	APPLEIR_OPENED = 0x1,
+	APPLEIR_SUSPENDED = 0x2,
+};
+
+static struct usb_device_id appleir_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
+	{}
+};
+MODULE_DEVICE_TABLE(usb, appleir_ids);
+
+/* I have two devices both of which report the following */
+/* 25 87 ee 83 0a  	+  */
+/* 25 87 ee 83 0c  	-  */
+/* 25 87 ee 83 09	<< */
+/* 25 87 ee 83 06	>> */
+/* 25 87 ee 83 05	>" */
+/* 25 87 ee 83 03	menu */
+/* 26 00 00 00 00	for key repeat*/
+
+/* Thomas Glanzmann reports the following responses */
+/* 25 87 ee ca 0b	+  */
+/* 25 87 ee ca 0d	-  */
+/* 25 87 ee ca 08	<< */
+/* 25 87 ee ca 07	>> */
+/* 25 87 ee ca 04	>" */
+/* 25 87 ee ca 02 	menu */
+/* 26 00 00 00 00       for key repeat*/
+/* He also observes the following event sometimes */
+/* sent after a key is release, which I interpret */
+/* as a flat battery message */
+/* 25 87 e0 ca 06	flat battery */
+
+/* Alexandre Karpenko reports the following responses for Device ID 0x8242 */
+/* 25 87 ee 47 0b	+  */
+/* 25 87 ee 47 0d	-  */
+/* 25 87 ee 47 08	<< */
+/* 25 87 ee 47 07	>> */
+/* 25 87 ee 47 04	>" */
+/* 25 87 ee 47 02 	menu */
+/* 26 87 ee 47 ** 	for key repeat (** is the code of the key being held) */
+
+static int keymap[MAX_KEYS] = {
+	KEY_RESERVED,
+	KEY_MENU,
+	KEY_PLAYPAUSE,
+	KEY_FORWARD,
+	KEY_BACK,
+	KEY_VOLUMEUP,
+	KEY_VOLUMEDOWN,
+	KEY_RESERVED,
+};
+
+static void dump_packet(struct appleir *appleir, char *msg, u8 *data, int len)
+{
+	int i;
+
+	printk(KERN_ERR "appleir: %s (%d bytes)", msg, len);
+
+	for (i = 0; i < len; ++i)
+		printk(" %02x", data[i]);
+	printk("\n");
+}
+
+static void key_up(struct appleir *appleir, int key)
+{
+	dbginfo (&appleir->input_dev->dev, "key %d up\n", key);
+	input_report_key(appleir->input_dev, key, 0);
+	input_sync(appleir->input_dev);
+}
+
+static void key_down(struct appleir *appleir, int key)
+{
+	dbginfo (&appleir->input_dev->dev, "key %d down\n", key);
+	input_report_key(appleir->input_dev, key, 1);
+	input_sync(appleir->input_dev);
+}
+
+static void battery_flat(struct appleir *appleir)
+{
+	dev_err(&appleir->input_dev->dev, "possible flat battery?\n");
+}
+
+static void key_up_tick(unsigned long data)
+{
+	struct appleir *appleir = (struct appleir *)data;
+
+	if (appleir->current_key) {
+		key_up(appleir, appleir->current_key);
+		appleir->current_key = 0;
+	}
+}
+
+static void new_data(struct appleir *appleir, u8 *data, int len)
+{
+	static const u8 keydown[] = { 0x25, 0x87, 0xee };
+	static const u8 keyrepeat[] = { 0x26, };
+	static const u8 flatbattery[] = { 0x25, 0x87, 0xe0 };
+
+	if (debug)
+		dump_packet(appleir, "received", data, len);
+
+	if (len != 5)
+		return;
+
+	if (!memcmp(data, keydown, sizeof(keydown))) {
+		/*If we already have a key down, take it up before marking */
+		/*this one down */
+		if (appleir->current_key)
+			key_up(appleir, appleir->current_key);
+		appleir->current_key = keymap[(data[4] >> 1) & MAX_KEYS_MASK];
+
+		key_down(appleir, appleir->current_key);
+		/*remote doesn't do key up, either pull them up, in the test */
+		/*above, or here set a timer which pulls them up after 1/8 s */
+		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+
+		return;
+	}
+
+	if (!memcmp(data, keyrepeat, sizeof(keyrepeat))) {
+		key_down(appleir, appleir->current_key);
+		/*remote doesn't do key up, either pull them up, in the test */
+		/*above, or here set a timer which pulls them up after 1/8 s */
+		mod_timer(&appleir->key_up_timer, jiffies + HZ / 8);
+		return;
+	}
+
+	if (!memcmp(data, flatbattery, sizeof(flatbattery))) {
+		battery_flat(appleir);
+		/* Fall through */
+	}
+
+	dump_packet(appleir, "unknown packet", data, len);
+}
+
+static void appleir_urb(struct urb *urb)
+{
+	struct appleir *appleir = urb->context;
+	int status = urb->status;
+	int retval;
+
+	switch (status) {
+	case 0:
+		new_data(appleir, urb->transfer_buffer, urb->actual_length);
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbginfo(&appleir->input_dev->dev, "%s - urb shutting down with status: %d", __func__,
+			urb->status);
+		return;
+	default:
+		dbginfo(&appleir->input_dev->dev, "%s - nonzero urb status received: %d", __func__,
+			urb->status);
+	}
+
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result %d", __func__,
+		    retval);
+}
+
+static int appleir_open(struct input_dev *dev)
+{
+	struct appleir *appleir = input_get_drvdata(dev);
+	struct usb_interface *intf = usb_ifnum_to_if(appleir->usbdev, 0);
+	int r;
+
+	r = usb_autopm_get_interface(intf);
+	if (r) {
+		dev_err(&intf->dev,
+			"%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+		return r;
+	}
+
+	mutex_lock(&appleir_mutex);
+
+	if (usb_submit_urb(appleir->urb, GFP_KERNEL)) {
+		r = -EIO;
+		goto fail;
+	}
+
+	appleir->flags |= APPLEIR_OPENED;
+
+	mutex_unlock(&appleir_mutex);
+
+	usb_autopm_put_interface(intf);
+
+	return 0;
+fail:
+	mutex_unlock(&appleir_mutex);
+	usb_autopm_put_interface(intf);
+	return r;
+}
+
+static void appleir_close(struct input_dev *dev)
+{
+	struct appleir *appleir = input_get_drvdata(dev);
+
+	mutex_lock(&appleir_mutex);
+
+	if (!(appleir->flags & APPLEIR_SUSPENDED)) {
+		usb_kill_urb(appleir->urb);
+		del_timer_sync(&appleir->key_up_timer);
+	}
+
+	appleir->flags &= ~APPLEIR_OPENED;
+
+	mutex_unlock(&appleir_mutex);
+}
+
+static int appleir_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct appleir *appleir = NULL;
+	struct input_dev *input_dev;
+	int retval = -ENOMEM;
+	int i;
+
+	appleir = kzalloc(sizeof(struct appleir), GFP_KERNEL);
+	if (!appleir)
+		goto fail;
+
+	appleir->data = usb_buffer_alloc(dev, URB_SIZE, GFP_KERNEL,
+					 &appleir->dma_buf);
+	if (!appleir->data)
+		goto fail;
+
+	appleir->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!appleir->urb)
+		goto fail;
+
+	appleir->usbdev = dev;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	appleir->input_dev = input_dev;
+
+	usb_make_path(dev, appleir->phys, sizeof(appleir->phys));
+	strlcpy(appleir->phys, "/input0", sizeof(appleir->phys));
+
+	input_dev->name = "Apple infrared remote control driver";
+	input_dev->phys = appleir->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+	input_set_drvdata(input_dev, appleir);
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	input_dev->ledbit[0] = 0;
+
+	for (i = 0; i < MAX_KEYS; i++)
+		set_bit(keymap[i], input_dev->keybit);
+
+	clear_bit(0, input_dev->keybit);
+
+	input_dev->open = appleir_open;
+	input_dev->close = appleir_close;
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	usb_fill_int_urb(appleir->urb, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 appleir->data, 8,
+			 appleir_urb, appleir, endpoint->bInterval);
+
+	appleir->urb->transfer_dma = appleir->dma_buf;
+	appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	usb_set_intfdata(intf, appleir);
+
+	init_timer(&appleir->key_up_timer);
+
+	appleir->key_up_timer.function = key_up_tick;
+	appleir->key_up_timer.data = (unsigned long)appleir;
+
+	appleir->timer_initted++;
+
+	retval = input_register_device(appleir->input_dev);
+	if (retval)
+		goto fail;
+
+	return 0;
+
+fail:
+	printk(KERN_WARNING "Failed to load appleir\n");
+	if (appleir) {
+		if (appleir->data)
+			usb_buffer_free(dev, URB_SIZE, appleir->data,
+					appleir->dma_buf);
+
+		if (appleir->timer_initted)
+			del_timer_sync(&appleir->key_up_timer);
+
+		if (appleir->input_dev)
+			input_free_device(appleir->input_dev);
+
+		kfree(appleir);
+	}
+
+	return retval;
+}
+
+static void appleir_disconnect(struct usb_interface *intf)
+{
+	struct appleir *appleir = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (appleir) {
+		input_unregister_device(appleir->input_dev);
+		if (appleir->timer_initted)
+			del_timer_sync(&appleir->key_up_timer);
+		usb_kill_urb(appleir->urb);
+		usb_free_urb(appleir->urb);
+		usb_buffer_free(interface_to_usbdev(intf), URB_SIZE,
+				appleir->data, appleir->dma_buf);
+		kfree(appleir);
+	}
+}
+
+static int appleir_suspend(struct usb_interface *interface,
+			   pm_message_t message)
+{
+	struct appleir *appleir;
+
+	appleir = usb_get_intfdata(interface);
+
+	mutex_lock(&appleir_mutex);
+
+	if (appleir->flags & APPLEIR_OPENED) {
+		usb_kill_urb(appleir->urb);
+		del_timer_sync(&appleir->key_up_timer);
+	}
+
+	appleir->flags |= APPLEIR_SUSPENDED;
+
+	mutex_unlock(&appleir_mutex);
+
+	return 0;
+}
+
+static int appleir_resume(struct usb_interface *interface)
+{
+	struct appleir *appleir;
+
+	appleir = usb_get_intfdata(interface);
+
+	mutex_lock(&appleir_mutex);
+
+	if (appleir->flags & APPLEIR_OPENED) {
+		struct usb_endpoint_descriptor *endpoint;
+
+		endpoint = &interface->cur_altsetting->endpoint[0].desc;
+		usb_fill_int_urb(appleir->urb, appleir->usbdev,
+				 usb_rcvintpipe(appleir->usbdev, endpoint->bEndpointAddress),
+				 appleir->data, 8,
+				 appleir_urb, appleir, endpoint->bInterval);
+		appleir->urb->transfer_dma = appleir->dma_buf;
+		appleir->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+		init_timer(&appleir->key_up_timer);
+
+		appleir->key_up_timer.function = key_up_tick;
+		appleir->key_up_timer.data = (unsigned long)appleir;
+	}
+
+	appleir->flags &= ~APPLEIR_SUSPENDED;
+
+	mutex_unlock(&appleir_mutex);
+
+	return 0;
+}
+
+static struct usb_driver appleir_driver = {
+	.name                 = "appleir",
+	.probe                = appleir_probe,
+	.disconnect           = appleir_disconnect,
+	.suspend              = appleir_suspend,
+	.resume               = appleir_resume,
+	.reset_resume         = appleir_resume,
+	.id_table             = appleir_ids,
+	.supports_autosuspend = 1,
+};
+
+static int __init appleir_init(void)
+{
+	int retval;
+
+	retval = usb_register(&appleir_driver);
+	if (retval)
+		goto out;
+	printk(KERN_INFO DRIVER_VERSION ":" DRIVER_DESC);
+out:
+	return retval;
+}
+
+static void __exit appleir_exit(void)
+{
+	usb_deregister(&appleir_driver);
+}
+
+module_init(appleir_init);
+module_exit(appleir_exit);
-- 
1.6.6


--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux