I tested this with a Bluetooth remote control. As I understand, reports can be written to either the interrupt or control sockets. I'm happy to test other changes to let this be selectable. Brian ________________________________________ From: Bastien Nocera [hadess@xxxxxxxxxx] Sent: Tuesday, January 19, 2010 2:30 AM To: Marcel Holtmann Cc: Dmitry Torokhov; linux-input; BlueZ development; Gunn, Brian; Ping; Jiri Kosina Subject: Re: [PATCHes] Implement Bluetooth Wacom tablet's mode change in the kernel On Mon, 2010-01-18 at 23:29 -0800, Marcel Holtmann wrote: > Hi Bastien, > > > Here's a patch to do the Bluetooth Wacom tablet's mode setting in the > > kernel. In the past, it was done in a patch in bluetootd. > > > > The first patch is probably completely wrong. Right now, > > hid_output_raw_report is done on the intr socket, instead of the ctrl > > socket. If it's correct to do it on the intr socket, we'd need to add > > some API as a way to select the ctrl socket instead for use in that > > driver. > > actually the interrupt should be incoming only. So moving the raw output > to the control channel seems fine to. Any reason why it is on the > interrupt channel in the first place? The patch was written by Jiri and tested by Brian. Not sure what sort of device Brian tested this with... -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
