This is an input layer driver for the SoundGraph iMON and Antec
Veris IR and/or Display (LCD/VFD/VGA touchscreen) devices that
do onboard signal decoding.
This driver has been baking for quite a while in the lirc tree, as
lirc_imon, which supported both all the current onboard decoding
imon devices, as well as some older raw IR ones. I've split support
into two different drivers now, this one, a pure input driver with
no ties to lirc at all (device can be used with lircd via its
userspace devinput driver though) and a pure lirc driver for the
older devices that don't do onboard decoding. There's a bit of
code duplication between the two, but not much anymore...
I did start using *some* of the new sparse keymap code for this
driver, but I quickly found I really needed more access to the
raw data (as well as 64-bit hw codes), so I'm really only using
sparse_keymap_{setup,free} right now, and I've not had cause to
implement {s,g}etkeycode to date. Work for the future.
Heavily tested with an Antec Veris Elite (IR + VFD), lightly tested
with an Antec Veris Premiere (IR + LCD), works quite well on both,
using both the stock Antec RM-200 remote and a Windows MCE remote
(as well as with a Logitech Harmony 880 programmed to emulate the
Antec remote).
Version 2 changes:
- Make separate const fops for lcd and vfd character devices
- Move key tables into main driver source
- Remove assorted lirc legacy cruft
- Fix a use-after-free bug
- Reduced printk spew
- Heavily refactor imon_probe() into smaller functions
- Refactor imon_incoming_packet() into smaller functions
- Make tx.busy actually work as intended (with memory barriers)
- Fix key table lookup issue on big-endian systems
- Make variables used as bools actual bool types
Even after all that churn, its still working. :)
Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
---
drivers/input/misc/Kconfig | 12 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/imon.c | 2429 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 2442 insertions(+), 0 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 16ec523..1196110 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -319,4 +319,16 @@ config INPUT_PCAP
To compile this driver as a module, choose M here: the
module will be called pcap_keys.
+config INPUT_IMON
+ tristate "SoundGraph iMON Receiver and Display"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ select INPUT_SPARSEKMAP
+ help
+ Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+ IR Receiver and/or LCD/VFD/VGA display.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imon.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a8b8485..79358ff 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IMON) += imon.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
diff --git a/drivers/input/misc/imon.c b/drivers/input/misc/imon.c
new file mode 100644
index 0000000..9b69966
--- /dev/null
+++ b/drivers/input/misc/imon.c
@@ -0,0 +1,2429 @@
+/*
+ * imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD
+ *
+ * Copyright(C) 2009 Jarod Wilson <jarod@xxxxxxxxxxxx>
+ * Portions based on the original lirc_imon driver,
+ * Copyright(C) 2004 Venky Raju(dev@xxxxxxxx)
+ *
+ * imon is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#define MOD_AUTHOR "Jarod Wilson <jarod@xxxxxxxxxxxx>"
+#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME "imon"
+#define MOD_VERSION "0.8"
+
+#define DISPLAY_MINOR_BASE 144
+#define DEVICE_NAME "lcd%d"
+
+#define BUF_CHUNK_SIZE 8
+#define BUF_SIZE 128
+
+#define BIT_DURATION 250 /* each bit received is 250us */
+
+#define IMON_CLOCK_ENABLE_PACKETS 2
+#define IMON_KEY_RELEASE_OFFSET 1000
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback_intf0(struct urb *urb);
+static void usb_rx_callback_intf1(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/* LCD file_operations override function prototypes */
+static ssize_t lcd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/*** G L O B A L S ***/
+
+struct imon_context {
+ struct device *dev;
+ struct usb_device *usbdev_intf0;
+ /* Newer devices have two interfaces */
+ struct usb_device *usbdev_intf1;
+ bool display_supported; /* not all controllers do */
+ bool display_isopen; /* display port has been opened */
+ bool ir_isassociating; /* IR port open for association */
+ bool dev_present_intf0; /* USB device presence, interface 0 */
+ bool dev_present_intf1; /* USB device presence, interface 1 */
+ struct mutex lock; /* to lock this object */
+ wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
+
+ struct usb_endpoint_descriptor *rx_endpoint_intf0;
+ struct usb_endpoint_descriptor *rx_endpoint_intf1;
+ struct usb_endpoint_descriptor *tx_endpoint;
+ struct urb *rx_urb_intf0;
+ struct urb *rx_urb_intf1;
+ struct urb *tx_urb;
+ bool tx_control;
+ unsigned char usb_rx_buf[8];
+ unsigned char usb_tx_buf[8];
+
+ struct tx_t {
+ unsigned char data_buf[35]; /* user data buffer */
+ struct completion finished; /* wait for write to finish */
+ bool busy; /* write in progress */
+ int status; /* status of tx completion */
+ } tx;
+
+ u16 vendor; /* usb vendor ID */
+ u16 product; /* usb product ID */
+ int ir_protocol; /* iMON or MCE (RC6) IR protocol? */
+ struct input_dev *idev; /* input device for remote */
+ struct input_dev *touch; /* input device for touchscreen */
+ int ki; /* current input keycode key index */
+ u16 kc; /* current input keycode */
+ u16 last_keycode; /* last reported input keycode */
+ u8 mce_toggle_bit; /* last mce toggle bit */
+ int display_type; /* store the display type */
+ bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */
+ int touch_x; /* x coordinate on touchscreen */
+ int touch_y; /* y coordinate on touchscreen */
+ char name_idev[128]; /* input device name */
+ char phys_idev[64]; /* input device phys path */
+ struct timer_list itimer; /* input device timer, need for rc6 */
+ char name_touch[128]; /* touch screen name */
+ char phys_touch[64]; /* touch screen phys path */
+ struct timer_list ttimer; /* touch screen timer */
+};
+
+#define TOUCH_TIMEOUT (HZ/30)
+#define MCE_TIMEOUT_MS 200
+
+/* vfd character device file operations */
+static const struct file_operations vfd_fops = {
+ .owner = THIS_MODULE,
+ .open = &display_open,
+ .write = &vfd_write,
+ .release = &display_close
+};
+
+/* lcd character device file operations */
+static const struct file_operations lcd_fops = {
+ .owner = THIS_MODULE,
+ .open = &display_open,
+ .write = &lcd_write,
+ .release = &display_close
+};
+
+enum {
+ IMON_DISPLAY_TYPE_AUTO = 0,
+ IMON_DISPLAY_TYPE_VFD = 1,
+ IMON_DISPLAY_TYPE_LCD = 2,
+ IMON_DISPLAY_TYPE_VGA = 3,
+ IMON_DISPLAY_TYPE_NONE = 4,
+};
+
+enum {
+ IMON_IR_PROTOCOL_IMON = 0,
+ IMON_IR_PROTOCOL_MCE = 1,
+ IMON_IR_PROTOCOL_IMON_NOPAD = 2,
+};
+
+enum {
+ IMON_BUTTON_IMON = 0,
+ IMON_BUTTON_MCE = 1,
+ IMON_BUTTON_PANEL = 2,
+};
+
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2). This driver only supports
+ * the ffdc and later devices, which do onboard decoding.
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+ /*
+ * Several devices with this same device ID, all use iMON_PAD.inf
+ * SoundGraph iMON PAD (IR & VFD)
+ * SoundGraph iMON PAD (IR & LCD)
+ * SoundGraph iMON Knob (IR only)
+ */
+ { USB_DEVICE(0x15c2, 0xffdc) },
+
+ /*
+ * Newer devices, all driven by the latest iMON Windows driver, full
+ * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
+ * Need user input to fill in details on unknown devices.
+ */
+ /* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
+ { USB_DEVICE(0x15c2, 0x0034) },
+ /* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
+ { USB_DEVICE(0x15c2, 0x0035) },
+ /* SoundGraph iMON OEM VFD (IR & VFD) */
+ { USB_DEVICE(0x15c2, 0x0036) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0037) },
+ /* SoundGraph iMON OEM LCD (IR & LCD) */
+ { USB_DEVICE(0x15c2, 0x0038) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0039) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003a) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003b) },
+ /* SoundGraph iMON OEM Inside (IR only) */
+ { USB_DEVICE(0x15c2, 0x003c) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003d) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003e) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003f) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0040) },
+ /* SoundGraph iMON MINI (IR only) */
+ { USB_DEVICE(0x15c2, 0x0041) },
+ /* Antec Veris Multimedia Station EZ External (IR only) */
+ { USB_DEVICE(0x15c2, 0x0042) },
+ /* Antec Veris Multimedia Station Basic Internal (IR only) */
+ { USB_DEVICE(0x15c2, 0x0043) },
+ /* Antec Veris Multimedia Station Elite (IR & VFD) */
+ { USB_DEVICE(0x15c2, 0x0044) },
+ /* Antec Veris Multimedia Station Premiere (IR & LCD) */
+ { USB_DEVICE(0x15c2, 0x0045) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0046) },
+ {}
+};
+
+/* iMON LCD models use a different write op */
+static struct usb_device_id lcd_device_list[] = {
+ { USB_DEVICE(0x15c2, 0xffdc) },
+ { USB_DEVICE(0x15c2, 0x0038) },
+ { USB_DEVICE(0x15c2, 0x0045) },
+ {}
+};
+
+/* Some iMON devices have no lcd/vfd, don't set one up */
+static struct usb_device_id ir_only_list[] = {
+ /* the first imon lcd and the knob share this device id. :\ */
+ /*{ USB_DEVICE(0x15c2, 0xffdc) },*/
+ { USB_DEVICE(0x15c2, 0x003c) },
+ { USB_DEVICE(0x15c2, 0x0041) },
+ { USB_DEVICE(0x15c2, 0x0042) },
+ { USB_DEVICE(0x15c2, 0x0043) },
+ {}
+};
+
+/* iMON devices with VGA touchscreens */
+static struct usb_device_id imon_touchscreen_list[] = {
+ { USB_DEVICE(0x15c2, 0x0034) },
+ { USB_DEVICE(0x15c2, 0x0035) },
+ {}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+ .name = MOD_NAME,
+ .probe = imon_probe,
+ .disconnect = imon_disconnect,
+ .suspend = imon_suspend,
+ .resume = imon_resume,
+ .id_table = imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_vfd_class = {
+ .name = DEVICE_NAME,
+ .fops = &vfd_fops,
+ .minor_base = DISPLAY_MINOR_BASE,
+};
+
+static struct usb_class_driver imon_lcd_class = {
+ .name = DEVICE_NAME,
+ .fops = &lcd_fops,
+ .minor_base = DISPLAY_MINOR_BASE,
+};
+
+/* standard imon remote key table */
+static const struct key_entry imon_remote_key_table[] = {
+ /* keys sorted mostly by frequency of use to optimize lookups */
+ { KE_KEY, 0x2a8195b7, { KEY_REWIND } },
+ { KE_KEY, 0x298315b7, { KEY_REWIND } },
+ { KE_KEY, 0x2b8115b7, { KEY_FASTFORWARD } },
+ { KE_KEY, 0x2b8315b7, { KEY_FASTFORWARD } },
+ { KE_KEY, 0x2b9115b7, { KEY_PREVIOUS } },
+ { KE_KEY, 0x298195b7, { KEY_NEXT } },
+
+ { KE_KEY, 0x2a8115b7, { KEY_PLAY } },
+ { KE_KEY, 0x2a8315b7, { KEY_PLAY } },
+ { KE_KEY, 0x2a9115b7, { KEY_PAUSE } },
+ { KE_KEY, 0x2b9715b7, { KEY_STOP } },
+ { KE_KEY, 0x298115b7, { KEY_RECORD } },
+
+ { KE_KEY, 0x01008000, { KEY_UP } },
+ { KE_KEY, 0x01007f00, { KEY_DOWN } },
+ { KE_KEY, 0x01000080, { KEY_LEFT } },
+ { KE_KEY, 0x0100007f, { KEY_RIGHT } },
+
+ { KE_KEY, 0x2aa515b7, { KEY_UP } },
+ { KE_KEY, 0x289515b7, { KEY_DOWN } },
+ { KE_KEY, 0x29a515b7, { KEY_LEFT } },
+ { KE_KEY, 0x2ba515b7, { KEY_RIGHT } },
+
+ { KE_KEY, 0x0200002c, { KEY_SPACE } }, /* Select/Space */
+ { KE_KEY, 0x02000028, { KEY_ENTER } },
+ { KE_KEY, 0x288195b7, { KEY_EXIT } },
+ { KE_KEY, 0x02000029, { KEY_ESC } },
+ { KE_KEY, 0x0200002a, { KEY_BACKSPACE } },
+
+ { KE_KEY, 0x2b9595b7, { KEY_MUTE } },
+ { KE_KEY, 0x28a395b7, { KEY_VOLUMEUP } },
+ { KE_KEY, 0x28a595b7, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x289395b7, { KEY_CHANNELUP } },
+ { KE_KEY, 0x288795b7, { KEY_CHANNELDOWN } },
+
+ { KE_KEY, 0x0200001e, { KEY_NUMERIC_1 } },
+ { KE_KEY, 0x0200001f, { KEY_NUMERIC_2 } },
+ { KE_KEY, 0x02000020, { KEY_NUMERIC_3 } },
+ { KE_KEY, 0x02000021, { KEY_NUMERIC_4 } },
+ { KE_KEY, 0x02000022, { KEY_NUMERIC_5 } },
+ { KE_KEY, 0x02000023, { KEY_NUMERIC_6 } },
+ { KE_KEY, 0x02000024, { KEY_NUMERIC_7 } },
+ { KE_KEY, 0x02000025, { KEY_NUMERIC_8 } },
+ { KE_KEY, 0x02000026, { KEY_NUMERIC_9 } },
+ { KE_KEY, 0x02000027, { KEY_NUMERIC_0 } },
+
+ { KE_KEY, 0x02200025, { KEY_NUMERIC_STAR } },
+ { KE_KEY, 0x02200020, { KEY_NUMERIC_POUND } },
+
+ { KE_KEY, 0x2b8515b7, { KEY_VIDEO } },
+ { KE_KEY, 0x299195b7, { KEY_AUDIO } },
+ { KE_KEY, 0x2ba115b7, { KEY_CAMERA } },
+ { KE_KEY, 0x28a515b7, { KEY_TV } },
+ { KE_KEY, 0x29a395b7, { KEY_DVD } },
+ { KE_KEY, 0x29a295b7, { KEY_DVD } },
+
+ /* the Menu key between DVD and Subtitle on the RM-200... */
+ { KE_KEY, 0x2ba385b7, { KEY_MENU } },
+ { KE_KEY, 0x2ba395b7, { KEY_MENU } },
+
+ { KE_KEY, 0x288515b7, { KEY_BOOKMARKS } },
+ { KE_KEY, 0x2ab715b7, { KEY_MEDIA } }, /* Thumbnail */
+ { KE_KEY, 0x298595b7, { KEY_SUBTITLE } },
+ { KE_KEY, 0x2b8595b7, { KEY_LANGUAGE } },
+
+ { KE_KEY, 0x29a595b7, { KEY_ZOOM } },
+ { KE_KEY, 0x2aa395b7, { KEY_SCREEN } }, /* FullScreen */
+
+ { KE_KEY, 0x299115b7, { KEY_KEYBOARD } },
+ { KE_KEY, 0x299135b7, { KEY_KEYBOARD } },
+
+ { KE_KEY, 0x01010000, { BTN_LEFT } },
+ { KE_KEY, 0x01020000, { BTN_RIGHT } },
+ { KE_KEY, 0x01010080, { BTN_LEFT } },
+ { KE_KEY, 0x01020080, { BTN_RIGHT } },
+
+ { KE_KEY, 0x2a9395b7, { KEY_CYCLEWINDOWS } }, /* TaskSwitcher */
+ { KE_KEY, 0x2b8395b7, { KEY_TIME } }, /* Timer */
+
+ { KE_KEY, 0x289115b7, { KEY_POWER } },
+ { KE_KEY, 0x29b195b7, { KEY_EJECTCD } }, /* the one next to play */
+ { KE_KEY, 0x299395b7, { KEY_EJECTCLOSECD } }, /* eject (by TaskSw) */
+
+ { KE_KEY, 0x02800000, { KEY_MENU } }, /* Left Menu */
+ { KE_KEY, 0x02000065, { KEY_COMPOSE } }, /* RightMenu */
+ { KE_KEY, 0x2ab195b7, { KEY_PROG1 } }, /* Go */
+ { KE_KEY, 0x29b715b7, { KEY_DASHBOARD } }, /* AppLauncher */
+ { KE_END, 0 }
+};
+
+/* mce-mode imon mce remote key table */
+static const struct key_entry imon_mce_key_table[] = {
+ /* keys sorted mostly by frequency of use to optimize lookups */
+ { KE_KEY, 0x800f8415, { KEY_REWIND } },
+ { KE_KEY, 0x800f8414, { KEY_FASTFORWARD } },
+ { KE_KEY, 0x800f841b, { KEY_PREVIOUS } },
+ { KE_KEY, 0x800f841a, { KEY_NEXT } },
+
+ { KE_KEY, 0x800f8416, { KEY_PLAY } },
+ { KE_KEY, 0x800f8418, { KEY_PAUSE } },
+ { KE_KEY, 0x800f8418, { KEY_PAUSE } },
+ { KE_KEY, 0x800f8419, { KEY_STOP } },
+ { KE_KEY, 0x800f8417, { KEY_RECORD } },
+
+ { KE_KEY, 0x02000052, { KEY_UP } },
+ { KE_KEY, 0x02000051, { KEY_DOWN } },
+ { KE_KEY, 0x02000050, { KEY_LEFT } },
+ { KE_KEY, 0x0200004f, { KEY_RIGHT } },
+
+ { KE_KEY, 0x02000028, { KEY_ENTER } },
+/* the OK and Enter buttons decode to the same value
+ { KE_KEY, 0x02000028, { KEY_OK } }, */
+ { KE_KEY, 0x0200002a, { KEY_EXIT } },
+ { KE_KEY, 0x02000029, { KEY_DELETE } },
+
+ { KE_KEY, 0x800f840e, { KEY_MUTE } },
+ { KE_KEY, 0x800f8410, { KEY_VOLUMEUP } },
+ { KE_KEY, 0x800f8411, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x800f8412, { KEY_CHANNELUP } },
+ { KE_KEY, 0x800f8413, { KEY_CHANNELDOWN } },
+
+ { KE_KEY, 0x0200001e, { KEY_NUMERIC_1 } },
+ { KE_KEY, 0x0200001f, { KEY_NUMERIC_2 } },
+ { KE_KEY, 0x02000020, { KEY_NUMERIC_3 } },
+ { KE_KEY, 0x02000021, { KEY_NUMERIC_4 } },
+ { KE_KEY, 0x02000022, { KEY_NUMERIC_5 } },
+ { KE_KEY, 0x02000023, { KEY_NUMERIC_6 } },
+ { KE_KEY, 0x02000024, { KEY_NUMERIC_7 } },
+ { KE_KEY, 0x02000025, { KEY_NUMERIC_8 } },
+ { KE_KEY, 0x02000026, { KEY_NUMERIC_9 } },
+ { KE_KEY, 0x02000027, { KEY_NUMERIC_0 } },
+
+ { KE_KEY, 0x02200025, { KEY_NUMERIC_STAR } },
+ { KE_KEY, 0x02200020, { KEY_NUMERIC_POUND } },
+
+ { KE_KEY, 0x800f8446, { KEY_TV } },
+ { KE_KEY, 0x800f8447, { KEY_AUDIO } },
+ { KE_KEY, 0x800f8448, { KEY_PVR } }, /* RecordedTV */
+ { KE_KEY, 0x800f8449, { KEY_CAMERA } },
+ { KE_KEY, 0x800f844a, { KEY_VIDEO } },
+ { KE_KEY, 0x800f8424, { KEY_DVD } },
+ { KE_KEY, 0x800f8425, { KEY_TUNER } }, /* LiveTV */
+
+ { KE_KEY, 0x800f845b, { KEY_RED } },
+ { KE_KEY, 0x800f845c, { KEY_GREEN } },
+ { KE_KEY, 0x800f845d, { KEY_YELLOW } },
+ { KE_KEY, 0x800f845e, { KEY_BLUE } },
+
+ { KE_KEY, 0x800f840f, { KEY_INFO } },
+ { KE_KEY, 0x800f8426, { KEY_EPG } }, /* Guide */
+ { KE_KEY, 0x800f845a, { KEY_SUBTITLE } }, /* Caption */
+
+ { KE_KEY, 0x800f840c, { KEY_POWER } },
+ { KE_KEY, 0x800f840d, { KEY_PROG1 } }, /* Windows MCE button */
+ { KE_END, 0 }
+
+};
+
+/* imon receiver front panel/knob key table */
+static const struct {
+ u64 hw_code;
+ u16 keycode;
+} imon_panel_key_table[] = {
+ { 0x000000000f000fee, KEY_PROG1 }, /* Go */
+ { 0x000000001f000fee, KEY_AUDIO },
+ { 0x0000000020000fee, KEY_VIDEO },
+ { 0x0000000021000fee, KEY_CAMERA },
+ { 0x0000000027000fee, KEY_DVD },
+/* the TV key on my panel is broken, doesn't work under any OS
+ { 0x0000000000000fee, KEY_TV }, */
+ { 0x0000000005000fee, KEY_PREVIOUS },
+ { 0x0000000007000fee, KEY_REWIND },
+ { 0x0000000004000fee, KEY_STOP },
+ { 0x000000003c000fee, KEY_PLAYPAUSE },
+ { 0x0000000008000fee, KEY_FASTFORWARD },
+ { 0x0000000006000fee, KEY_NEXT },
+ { 0x0000000100000fee, KEY_RIGHT },
+ { 0x0000010000000fee, KEY_LEFT },
+ { 0x000000003d000fee, KEY_SELECT },
+ { 0x0001000000000fee, KEY_VOLUMEUP },
+ { 0x0100000000000fee, KEY_VOLUMEDOWN },
+ { 0x0000000001000fee, KEY_MUTE },
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+/* Module bookkeeping bits */
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+
+static bool debug;
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
+
+/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
+static int display_type;
+module_param(display_type, int, S_IRUGO);
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
+ "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+
+/* IR protocol: native iMON, Windows MCE (RC-6), or iMON w/o PAD stabilize */
+static int ir_protocol;
+module_param(ir_protocol, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ir_protocol, "Which IR protocol to use. 0=native iMON, "
+ "1=Windows Media Center Ed. (RC-6), 2=iMON w/o PAD stabilize "
+ "(default: native iMON)");
+
+/*
+ * In certain use cases, mouse mode isn't really helpful, and could actually
+ * cause confusion, so allow disabling it when the IR device is open.
+ */
+static bool nomouse;
+module_param(nomouse, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
+ "open. 0=don't disable, 1=disable. (default: don't disable)");
+
+/* threshold at which a pad push registers as an arrow key in kbd mode */
+static int pad_thresh;
+module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
+ "arrow key in kbd mode (default: 28)");
+
+
+static void free_imon_context(struct imon_context *ictx)
+{
+ struct device *dev = ictx->dev;
+
+ usb_free_urb(ictx->tx_urb);
+ usb_free_urb(ictx->rx_urb_intf0);
+ usb_free_urb(ictx->rx_urb_intf1);
+ kfree(ictx);
+
+ dev_dbg(dev, "%s: iMON context freed\n", __func__);
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+ struct usb_interface *interface;
+ struct imon_context *ictx = NULL;
+ int subminor;
+ int retval = 0;
+
+ /* prevent races with disconnect */
+ mutex_lock(&driver_lock);
+
+ subminor = iminor(inode);
+ interface = usb_find_interface(&imon_driver, subminor);
+ if (!interface) {
+ err("%s: could not find interface for minor %d",
+ __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+ ictx = usb_get_intfdata(interface);
+
+ if (!ictx) {
+ err("%s: no context found for minor %d", __func__, subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ err("%s: display not supported by device", __func__);
+ retval = -ENODEV;
+ } else if (ictx->display_isopen) {
+ err("%s: display port is already open", __func__);
+ retval = -EBUSY;
+ } else {
+ ictx->display_isopen = 1;
+ file->private_data = ictx;
+ dev_dbg(ictx->dev, "display port opened\n");
+ }
+
+ mutex_unlock(&ictx->lock);
+
+exit:
+ mutex_unlock(&driver_lock);
+ return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+ struct imon_context *ictx = NULL;
+ int retval = 0;
+
+ ictx = (struct imon_context *)file->private_data;
+
+ if (!ictx) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ err("%s: display not supported by device", __func__);
+ retval = -ENODEV;
+ } else if (!ictx->display_isopen) {
+ err("%s: display is not open", __func__);
+ retval = -EIO;
+ } else {
+ ictx->display_isopen = 0;
+ dev_dbg(ictx->dev, "display port closed\n");
+ if (!ictx->dev_present_intf0) {
+ /*
+ * Device disconnected before close and IR port is not
+ * open. If IR port is open, context will be deleted by
+ * ir_close.
+ */
+ mutex_unlock(&ictx->lock);
+ free_imon_context(ictx);
+ return retval;
+ }
+ }
+
+ mutex_unlock(&ictx->lock);
+ return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with ictx->lock held.
+ */
+static int send_packet(struct imon_context *ictx)
+{
+ unsigned int pipe;
+ int interval = 0;
+ int retval = 0;
+ struct usb_ctrlrequest *control_req = NULL;
+
+ /* Check if we need to use control or interrupt urb */
+ if (!ictx->tx_control) {
+ pipe = usb_sndintpipe(ictx->usbdev_intf0,
+ ictx->tx_endpoint->bEndpointAddress);
+ interval = ictx->tx_endpoint->bInterval;
+
+ usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
+ ictx->usb_tx_buf,
+ sizeof(ictx->usb_tx_buf),
+ usb_tx_callback, ictx, interval);
+
+ ictx->tx_urb->actual_length = 0;
+ } else {
+ /* fill request into kmalloc'ed space: */
+ control_req = kmalloc(sizeof(struct usb_ctrlrequest),
+ GFP_KERNEL);
+ if (control_req == NULL)
+ return -ENOMEM;
+
+ /* setup packet is '21 09 0200 0001 0008' */
+ control_req->bRequestType = 0x21;
+ control_req->bRequest = 0x09;
+ control_req->wValue = cpu_to_le16(0x0200);
+ control_req->wIndex = cpu_to_le16(0x0001);
+ control_req->wLength = cpu_to_le16(0x0008);
+
+ /* control pipe is endpoint 0x00 */
+ pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
+
+ /* build the control urb */
+ usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
+ pipe, (unsigned char *)control_req,
+ ictx->usb_tx_buf,
+ sizeof(ictx->usb_tx_buf),
+ usb_tx_callback, ictx);
+ ictx->tx_urb->actual_length = 0;
+ }
+
+ init_completion(&ictx->tx.finished);
+ ictx->tx.busy = 1;
+ smp_rmb(); /* ensure later readers know we're busy */
+
+ retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
+ if (retval) {
+ ictx->tx.busy = 0;
+ smp_rmb(); /* ensure later readers know we're not busy */
+ err("%s: error submitting urb(%d)", __func__, retval);
+ } else {
+ /* Wait for transmission to complete (or abort) */
+ mutex_unlock(&ictx->lock);
+ retval = wait_for_completion_interruptible(
+ &ictx->tx.finished);
+ if (retval)
+ err("%s: task interrupted", __func__);
+ mutex_lock(&ictx->lock);
+
+ retval = ictx->tx.status;
+ if (retval)
+ err("%s: packet tx failed (%d)", __func__, retval);
+ }
+
+ kfree(control_req);
+
+ return retval;
+}
+
+/**
+ * Sends an associate packet to the iMON 2.4G.
+ *
+ * This might not be such a good idea, since it has an id collision with
+ * some versions of the "IR & VFD" combo. The only way to determine if it
+ * is an RF version is to look at the product description string. (Which
+ * we currently do not fetch).
+ */
+static int send_associate_24g(struct imon_context *ictx)
+{
+ int retval;
+ const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x20 };
+
+ if (!ictx) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ if (!ictx->dev_present_intf0) {
+ err("%s: no iMON device present", __func__);
+ return -ENODEV;
+ }
+
+ memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
+ retval = send_packet(ictx);
+
+ return retval;
+}
+
+/**
+ * Sends packets to setup and show clock on iMON display
+ *
+ * Arguments: year - last 2 digits of year, month - 1..12,
+ * day - 1..31, dow - day of the week (0-Sun...6-Sat),
+ * hour - 0..23, minute - 0..59, second - 0..59
+ */
+static int send_set_imon_clock(struct imon_context *ictx,
+ unsigned int year, unsigned int month,
+ unsigned int day, unsigned int dow,
+ unsigned int hour, unsigned int minute,
+ unsigned int second)
+{
+ unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
+ int retval = 0;
+ int i;
+
+ if (!ictx) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ switch (ictx->display_type) {
+ case IMON_DISPLAY_TYPE_LCD:
+ clock_enable_pkt[0][0] = 0x80;
+ clock_enable_pkt[0][1] = year;
+ clock_enable_pkt[0][2] = month-1;
+ clock_enable_pkt[0][3] = day;
+ clock_enable_pkt[0][4] = hour;
+ clock_enable_pkt[0][5] = minute;
+ clock_enable_pkt[0][6] = second;
+
+ clock_enable_pkt[1][0] = 0x80;
+ clock_enable_pkt[1][1] = 0;
+ clock_enable_pkt[1][2] = 0;
+ clock_enable_pkt[1][3] = 0;
+ clock_enable_pkt[1][4] = 0;
+ clock_enable_pkt[1][5] = 0;
+ clock_enable_pkt[1][6] = 0;
+
+ if (ictx->product == 0xffdc) {
+ clock_enable_pkt[0][7] = 0x50;
+ clock_enable_pkt[1][7] = 0x51;
+ } else {
+ clock_enable_pkt[0][7] = 0x88;
+ clock_enable_pkt[1][7] = 0x8a;
+ }
+
+ break;
+
+ case IMON_DISPLAY_TYPE_VFD:
+ clock_enable_pkt[0][0] = year;
+ clock_enable_pkt[0][1] = month-1;
+ clock_enable_pkt[0][2] = day;
+ clock_enable_pkt[0][3] = dow;
+ clock_enable_pkt[0][4] = hour;
+ clock_enable_pkt[0][5] = minute;
+ clock_enable_pkt[0][6] = second;
+ clock_enable_pkt[0][7] = 0x40;
+
+ clock_enable_pkt[1][0] = 0;
+ clock_enable_pkt[1][1] = 0;
+ clock_enable_pkt[1][2] = 1;
+ clock_enable_pkt[1][3] = 0;
+ clock_enable_pkt[1][4] = 0;
+ clock_enable_pkt[1][5] = 0;
+ clock_enable_pkt[1][6] = 0;
+ clock_enable_pkt[1][7] = 0x42;
+
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
+ memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
+ retval = send_packet(ictx);
+ if (retval) {
+ err("%s: send_packet failed for packet %d",
+ __func__, i);
+ break;
+ }
+ }
+
+ return retval;
+}
+
+/**
+ * These are the sysfs functions to handle the association on the iMON 2.4G LT.
+ */
+static ssize_t show_associate_remote(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+ if (ictx->ir_isassociating)
+ strcpy(buf, "associating\n");
+ else
+ strcpy(buf, "closed\n");
+
+ dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
+ "instructions on how to associate your iMON 2.4G DT/LT "
+ "remote\n");
+ mutex_unlock(&ictx->lock);
+ return strlen(buf);
+}
+
+static ssize_t store_associate_remote(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imon_context *ictx;
+
+ ictx = dev_get_drvdata(d);
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+ ictx->ir_isassociating = 1;
+ send_associate_24g(ictx);
+ mutex_unlock(&ictx->lock);
+
+ return count;
+}
+
+/**
+ * sysfs functions to control internal imon clock
+ */
+static ssize_t show_imon_clock(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+ size_t len;
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ len = snprintf(buf, PAGE_SIZE, "Not supported.");
+ } else {
+ len = snprintf(buf, PAGE_SIZE,
+ "To set the clock on your iMON display:\n"
+ "# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
+ "%s", ictx->display_isopen ?
+ "\nNOTE: imon device must be closed\n" : "");
+ }
+
+ mutex_unlock(&ictx->lock);
+
+ return len;
+}
+
+static ssize_t store_imon_clock(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+ ssize_t retval;
+ unsigned int year, month, day, dow, hour, minute, second;
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ retval = -ENODEV;
+ goto exit;
+ } else if (ictx->display_isopen) {
+ retval = -EBUSY;
+ goto exit;
+ }
+
+ if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow,
+ &hour, &minute, &second) != 7) {
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if ((month < 1 || month > 12) ||
+ (day < 1 || day > 31) || (dow > 6) ||
+ (hour > 23) || (minute > 59) || (second > 59)) {
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ retval = send_set_imon_clock(ictx, year, month, day, dow,
+ hour, minute, second);
+ if (retval)
+ goto exit;
+
+ retval = count;
+exit:
+ mutex_unlock(&ictx->lock);
+
+ return retval;
+}
+
+
+static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
+ store_imon_clock);
+
+static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
+ store_associate_remote);
+
+static struct attribute *imon_display_sysfs_entries[] = {
+ &dev_attr_imon_clock.attr,
+ NULL
+};
+
+static struct attribute_group imon_display_attribute_group = {
+ .attrs = imon_display_sysfs_entries
+};
+
+static struct attribute *imon_rf_sysfs_entries[] = {
+ &dev_attr_associate_remote.attr,
+ NULL
+};
+
+static struct attribute_group imon_rf_attribute_group = {
+ .attrs = imon_rf_sysfs_entries
+};
+
+/**
+ * Writes data to the VFD. The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data. If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int i;
+ int offset;
+ int seq;
+ int retval = 0;
+ struct imon_context *ictx;
+ const unsigned char vfd_packet6[] = {
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+
+ ictx = (struct imon_context *)file->private_data;
+ if (!ictx) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->dev_present_intf0) {
+ err("%s: no iMON device present", __func__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes <= 0 || n_bytes > 32) {
+ err("%s: invalid payload size", __func__);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ /* Pad with spaces */
+ for (i = n_bytes; i < 32; ++i)
+ ictx->tx.data_buf[i] = ' ';
+
+ for (i = 32; i < 35; ++i)
+ ictx->tx.data_buf[i] = 0xFF;
+
+ offset = 0;
+ seq = 0;
+
+ do {
+ memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
+ ictx->usb_tx_buf[7] = (unsigned char) seq;
+
+ retval = send_packet(ictx);
+ if (retval) {
+ err("%s: send packet failed for packet #%d",
+ __func__, seq/2);
+ goto exit;
+ } else {
+ seq += 2;
+ offset += 7;
+ }
+
+ } while (offset < 35);
+
+ /* Send packet #6 */
+ memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+ ictx->usb_tx_buf[7] = (unsigned char) seq;
+ retval = send_packet(ictx);
+ if (retval)
+ err("%s: send packet failed for packet #%d",
+ __func__, seq / 2);
+
+exit:
+ mutex_unlock(&ictx->lock);
+
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Writes data to the LCD. The iMON OEM LCD screen expects 8-byte
+ * packets. We accept data as 16 hexadecimal digits, followed by a
+ * newline (to make it easy to drive the device from a command-line
+ * -- even though the actual binary data is a bit complicated).
+ *
+ * The device itself is not a "traditional" text-mode display. It's
+ * actually a 16x96 pixel bitmap display. That means if you want to
+ * display text, you've got to have your own "font" and translate the
+ * text into bitmaps for display. This is really flexible (you can
+ * display whatever diacritics you need, and so on), but it's also
+ * a lot more complicated than most LCDs...
+ */
+static ssize_t lcd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int retval = 0;
+ struct imon_context *ictx;
+
+ ictx = (struct imon_context *)file->private_data;
+ if (!ictx) {
+ err("%s: no context for device", __func__);
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ err("%s: no iMON display present", __func__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes != 8) {
+ err("%s: invalid payload size: %d (expecting 8)",
+ __func__, (int) n_bytes);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ retval = send_packet(ictx);
+ if (retval) {
+ err("%s: send packet failed!", __func__);
+ goto exit;
+ } else {
+ dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
+ __func__, (int) n_bytes);
+ }
+exit:
+ mutex_unlock(&ictx->lock);
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+ struct imon_context *ictx;
+
+ if (!urb)
+ return;
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ ictx->tx.status = urb->status;
+
+ /* notify waiters that write has finished */
+ ictx->tx.busy = 0;
+ smp_rmb(); /* ensure later readers know we're not busy */
+ complete(&ictx->tx.finished);
+}
+
+/**
+ * iMON IR receivers support two different signal sets -- those used by
+ * the iMON remotes, and those used by the Windows MCE remotes (which is
+ * really just RC-6), but only one or the other at a time, as the signals
+ * are decoded onboard the receiver.
+ */
+static void imon_set_ir_protocol(struct imon_context *ictx)
+{
+ int retval;
+ struct device *dev = ictx->dev;
+ unsigned char ir_proto_packet[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
+
+ switch (ir_protocol) {
+ case IMON_IR_PROTOCOL_MCE:
+ dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
+ ir_proto_packet[0] = 0x01;
+ ictx->ir_protocol = IMON_IR_PROTOCOL_MCE;
+ ictx->pad_mouse = 0;
+ break;
+ case IMON_IR_PROTOCOL_IMON:
+ dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
+ /* ir_proto_packet[0] = 0x00; // already the default */
+ ictx->ir_protocol = IMON_IR_PROTOCOL_IMON;
+ ictx->pad_mouse = 1;
+ break;
+ case IMON_IR_PROTOCOL_IMON_NOPAD:
+ dev_dbg(dev, "Configuring IR receiver for iMON protocol "
+ "without PAD stabilize function enabled\n");
+ /* ir_proto_packet[0] = 0x00; // already the default */
+ ictx->ir_protocol = IMON_IR_PROTOCOL_IMON_NOPAD;
+ ictx->pad_mouse = 0;
+ break;
+ default:
+ dev_info(dev, "%s: unknown IR protocol specified, will "
+ "just default to iMON protocol\n", __func__);
+ ictx->ir_protocol = IMON_IR_PROTOCOL_IMON;
+ ictx->pad_mouse = 1;
+ break;
+ }
+
+ memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
+
+ retval = send_packet(ictx);
+ if (retval) {
+ dev_info(dev, "%s: failed to set IR protocol, falling back "
+ "to standard iMON protocol mode\n", __func__);
+ ir_protocol = IMON_IR_PROTOCOL_IMON;
+ ictx->ir_protocol = IMON_IR_PROTOCOL_IMON;
+ }
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+ int usecs = 0;
+ int sec = 0;
+
+ if (b->tv_usec > a->tv_usec) {
+ usecs = 1000000;
+ sec--;
+ }
+
+ usecs += a->tv_usec - b->tv_usec;
+
+ sec += a->tv_sec - b->tv_sec;
+ sec *= 1000;
+ usecs /= 1000;
+ sec += usecs;
+
+ if (sec < 0)
+ sec = 1000;
+
+ return sec;
+}
+
+/**
+ * The directional pad behaves a bit differently, depending on whether this is
+ * one of the older ffdc devices or a newer device. Newer devices appear to
+ * have a higher resolution matrix for more precise mouse movement, but it
+ * makes things overly sensitive in keyboard mode, so we do some interesting
+ * contortions to make it less touchy. Older devices run through the same
+ * routine with shorter timeout and a smaller threshold.
+ */
+static int stabilize(int a, int b, u16 timeout, u16 threshold)
+{
+ struct timeval ct;
+ static struct timeval prev_time = {0, 0};
+ static struct timeval hit_time = {0, 0};
+ static int x, y, prev_result, hits;
+ int result = 0;
+ int msec, msec_hit;
+
+ do_gettimeofday(&ct);
+ msec = tv2int(&ct, &prev_time);
+ msec_hit = tv2int(&ct, &hit_time);
+
+ if (msec > 100) {
+ x = 0;
+ y = 0;
+ hits = 0;
+ }
+
+ x += a;
+ y += b;
+
+ prev_time = ct;
+
+ if (abs(x) > threshold || abs(y) > threshold) {
+ if (abs(y) > abs(x))
+ result = (y > 0) ? 0x7F : 0x80;
+ else
+ result = (x > 0) ? 0x7F00 : 0x8000;
+
+ x = 0;
+ y = 0;
+
+ if (result == prev_result) {
+ hits++;
+
+ if (hits > 3) {
+ switch (result) {
+ case 0x7F:
+ y = 17 * threshold / 30;
+ break;
+ case 0x80:
+ y -= 17 * threshold / 30;
+ break;
+ case 0x7F00:
+ x = 17 * threshold / 30;
+ break;
+ case 0x8000:
+ x -= 17 * threshold / 30;
+ break;
+ }
+ }
+
+ if (hits == 2 && msec_hit < timeout) {
+ result = 0;
+ hits = 1;
+ }
+ } else {
+ prev_result = result;
+ hits = 1;
+ hit_time = ct;
+ }
+ }
+
+ return result;
+}
+
+static int imon_remote_key_lookup(u32 hw_code)
+{
+ int i;
+ u32 code = be32_to_cpu(hw_code);
+
+ /* Look for the initial press of a button */
+ for (i = 0; i < ARRAY_SIZE(imon_remote_key_table); i++)
+ if (imon_remote_key_table[i].code == code)
+ return i;
+
+ /* Look for the release of a button, return index + offset */
+ for (i = 0; i < ARRAY_SIZE(imon_remote_key_table); i++)
+ if ((imon_remote_key_table[i].code | 0x4000) == code)
+ return i + IMON_KEY_RELEASE_OFFSET;
+
+ return -1;
+}
+
+static int imon_mce_key_lookup(u32 hw_code)
+{
+ int i;
+ u32 code = be32_to_cpu(hw_code);
+
+ for (i = 0; i < ARRAY_SIZE(imon_mce_key_table); i++)
+ if (imon_mce_key_table[i].code == code)
+ return i;
+
+ for (i = 0; i < ARRAY_SIZE(imon_mce_key_table); i++)
+ if (imon_mce_key_table[i].code == (code | 0x8000))
+ return i;
+
+ return -1;
+}
+
+static int imon_panel_key_lookup(u64 hw_code)
+{
+ int i;
+ u64 code = be64_to_cpu(hw_code);
+
+ for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++)
+ if (imon_panel_key_table[i].hw_code == (code | 0xfee))
+ return i;
+
+ return -1;
+}
+
+static bool imon_mouse_event(struct imon_context *ictx,
+ unsigned char *buf, int len)
+{
+ char rel_x = 0x00, rel_y = 0x00;
+ u8 right_shift = 1;
+ bool mouse_input = 1;
+ int dir = 0;
+
+ /* newer iMON device PAD or mouse button */
+ if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
+ rel_x = buf[2];
+ rel_y = buf[3];
+ right_shift = 1;
+ /* 0xffdc iMON PAD or mouse button input */
+ } else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
+ !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
+ rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+ (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+ if (buf[0] & 0x02)
+ rel_x |= ~0x0f;
+ rel_x = rel_x + rel_x / 2;
+ rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+ (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+ if (buf[0] & 0x01)
+ rel_y |= ~0x0f;
+ rel_y = rel_y + rel_y / 2;
+ right_shift = 2;
+ /* some ffdc devices decode mouse buttons differently... */
+ } else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
+ right_shift = 2;
+ /* ch+/- buttons, which we use for an emulated scroll wheel */
+ } else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
+ dir = 1;
+ } else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
+ dir = -1;
+ } else
+ mouse_input = 0;
+
+ if (mouse_input) {
+ dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
+
+ if (dir) {
+ input_report_rel(ictx->idev, REL_WHEEL, dir);
+ } else if (rel_x || rel_y) {
+ input_report_rel(ictx->idev, REL_X, rel_x);
+ input_report_rel(ictx->idev, REL_Y, rel_y);
+ } else {
+ input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
+ input_report_key(ictx->idev, BTN_RIGHT,
+ buf[1] >> right_shift & 0x1);
+ }
+ input_sync(ictx->idev);
+ ictx->last_keycode = ictx->kc;
+ }
+
+ return mouse_input;
+}
+
+static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
+{
+ mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
+ ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
+ ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
+ input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+ input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+ input_report_key(ictx->touch, BTN_TOUCH, 0x01);
+ input_sync(ictx->touch);
+}
+
+static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
+{
+ int ki = 1;
+ int dir = 0;
+ int offset = IMON_KEY_RELEASE_OFFSET;
+ char rel_x = 0x00, rel_y = 0x00;
+ u16 timeout, threshold;
+ u64 temp_key;
+ u32 remote_key;
+
+ /*
+ * The imon directional pad functions more like a touchpad. Bytes 3 & 4
+ * contain a position coordinate (x,y), with each component ranging
+ * from -14 to 14. We want to down-sample this to only 4 discrete values
+ * for up/down/left/right arrow keys. Also, when you get too close to
+ * diagonals, it has a tendancy to jump back and forth, so lets try to
+ * ignore when they get too close.
+ */
+ if (ictx->product != 0xffdc) {
+ /* first, pad to 8 bytes so it conforms with everything else */
+ buf[5] = buf[6] = buf[7] = 0;
+ timeout = 500; /* in msecs */
+ /* (2*threshold) x (2*threshold) square */
+ threshold = pad_thresh ? pad_thresh : 28;
+ rel_x = buf[2];
+ rel_y = buf[3];
+
+ if (ictx->ir_protocol == IMON_IR_PROTOCOL_IMON) {
+ if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
+ dir = stabilize((int)rel_x, (int)rel_y,
+ timeout, threshold);
+ if (!dir) {
+ ictx->kc = KEY_UNKNOWN;
+ return;
+ }
+ buf[2] = dir & 0xFF;
+ buf[3] = (dir >> 8) & 0xFF;
+ memcpy(&temp_key, buf, sizeof(temp_key));
+ remote_key = (u32) (le64_to_cpu(temp_key)
+ & 0xffffffff);
+ ki = imon_remote_key_lookup(remote_key);
+ ictx->kc =
+ imon_remote_key_table[ki % offset].keycode;
+ }
+ } else {
+ if (abs(rel_y) > abs(rel_x)) {
+ buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+ buf[3] = 0;
+ ictx->kc = (rel_y > 0) ? KEY_DOWN : KEY_UP;
+ } else {
+ buf[2] = 0;
+ buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+ ictx->kc = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT;
+ }
+ }
+
+ /*
+ * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
+ * device (15c2:ffdc). The remote generates various codes from
+ * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
+ * 0x688301b7 and the right one 0x688481b7. All other keys generate
+ * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
+ * reversed endianess. Extract direction from buffer, rotate endianess,
+ * adjust sign and feed the values into stabilize(). The resulting codes
+ * will be 0x01008000, 0x01007F00, which match the newer devices.
+ */
+ } else {
+ timeout = 10; /* in msecs */
+ /* (2*threshold) x (2*threshold) square */
+ threshold = pad_thresh ? pad_thresh : 15;
+
+ /* buf[1] is x */
+ rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+ (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+ if (buf[0] & 0x02)
+ rel_x |= ~0x10+1;
+ /* buf[2] is y */
+ rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+ (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+ if (buf[0] & 0x01)
+ rel_y |= ~0x10+1;
+
+ buf[0] = 0x01;
+ buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
+
+ if (ictx->ir_protocol == IMON_IR_PROTOCOL_IMON) {
+ dir = stabilize((int)rel_x, (int)rel_y,
+ timeout, threshold);
+ if (!dir) {
+ ictx->kc = KEY_UNKNOWN;
+ return;
+ }
+ buf[2] = dir & 0xFF;
+ buf[3] = (dir >> 8) & 0xFF;
+ memcpy(&temp_key, buf, sizeof(temp_key));
+ remote_key = (u32) (le64_to_cpu(temp_key) & 0xffffffff);
+ ki = imon_remote_key_lookup(remote_key);
+ ictx->kc = imon_remote_key_table[ki % offset].keycode;
+ } else {
+ if (abs(rel_y) > abs(rel_x)) {
+ buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+ buf[3] = 0;
+ ictx->kc = (rel_y > 0) ? KEY_DOWN : KEY_UP;
+ } else {
+ buf[2] = 0;
+ buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+ ictx->kc = (rel_x > 0) ? KEY_RIGHT : KEY_LEFT;
+ }
+ }
+ }
+
+ ictx->ki = ki;
+}
+
+static int imon_parse_press_type(struct imon_context *ictx,
+ unsigned char *buf, u8 ksrc)
+{
+ int press_type = 0;
+
+ /* key release of 0x02XXXXXX key */
+ if (ictx->ki == -1 && buf[0] == 0x02 && buf[3] == 0x00)
+ ictx->kc = ictx->last_keycode;
+
+ /* mce-specific button handling */
+ else if (ksrc == IMON_BUTTON_MCE) {
+ /* initial press */
+ if (ictx->kc != ictx->last_keycode
+ || buf[2] != ictx->mce_toggle_bit) {
+ ictx->last_keycode = ictx->kc;
+ ictx->mce_toggle_bit = buf[2];
+ press_type = 1;
+ mod_timer(&ictx->itimer,
+ jiffies + msecs_to_jiffies(MCE_TIMEOUT_MS));
+ /* repeat */
+ } else {
+ press_type = 2;
+ mod_timer(&ictx->itimer,
+ jiffies + msecs_to_jiffies(MCE_TIMEOUT_MS));
+ }
+
+ /* incoherent or irrelevant data */
+ } else if (ictx->ki == -1)
+ press_type = -EINVAL;
+
+ /* key release of 0xXXXXXXb7 key */
+ else if (ictx->ki >= IMON_KEY_RELEASE_OFFSET)
+ press_type = 0;
+
+ /* this is a button press */
+ else
+ press_type = 1;
+
+ return press_type;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *ictx,
+ struct urb *urb, int intf)
+{
+ int len = urb->actual_length;
+ unsigned char *buf = urb->transfer_buffer;
+ struct device *dev = ictx->dev;
+ u16 kc;
+ bool norelease = 0;
+ int i, ki;
+ int offset = IMON_KEY_RELEASE_OFFSET;
+ u64 temp_key;
+ u64 panel_key = 0;
+ u32 remote_key;
+ struct input_dev *idev = NULL;
+ int press_type = 0;
+ int msec;
+ struct timeval t;
+ static struct timeval prev_time = { 0, 0 };
+ u8 ksrc = IMON_BUTTON_IMON;
+
+ idev = ictx->idev;
+
+ /* Figure out what key was pressed */
+ memcpy(&temp_key, buf, sizeof(temp_key));
+ if (len == 8 && buf[7] == 0xee) {
+ ksrc = IMON_BUTTON_PANEL;
+ panel_key = le64_to_cpu(temp_key);
+ ki = imon_panel_key_lookup(panel_key);
+ kc = imon_panel_key_table[ki].keycode;
+ } else {
+ remote_key = (u32) (le64_to_cpu(temp_key) & 0xffffffff);
+ if (ictx->ir_protocol == IMON_IR_PROTOCOL_MCE) {
+ if (buf[0] == 0x80)
+ ksrc = IMON_BUTTON_MCE;
+ ki = imon_mce_key_lookup(remote_key);
+ kc = imon_mce_key_table[ki].keycode;
+ } else {
+ ki = imon_remote_key_lookup(remote_key);
+ kc = imon_remote_key_table[ki % offset].keycode;
+ }
+ }
+
+ /* keyboard/mouse mode toggle button */
+ if (kc == KEY_KEYBOARD && ki < offset) {
+ if (!nomouse) {
+ ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
+ dev_dbg(dev, "toggling to %s mode\n",
+ ictx->pad_mouse ? "mouse" : "keyboard");
+ } else {
+ ictx->pad_mouse = 0;
+ dev_dbg(dev, "mouse mode was disabled by modparam\n");
+ }
+ ictx->last_keycode = kc;
+ return;
+ }
+
+ ictx->ki = ki;
+ ictx->kc = kc;
+
+ /* send touchscreen events through input subsystem if touchpad data */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
+ buf[7] == 0x86) {
+ imon_touch_event(ictx, buf);
+
+ /* look for mouse events with pad in mouse mode */
+ } else if (ictx->pad_mouse) {
+ if (imon_mouse_event(ictx, buf, len))
+ return;
+ }
+
+ /* Now for some special handling to convert pad input to arrow keys */
+ if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
+ ((len == 8) && (buf[0] & 0x40) &&
+ !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
+ len = 8;
+ imon_pad_to_keys(ictx, buf);
+ norelease = 1;
+ }
+
+ if (debug) {
+ printk(KERN_INFO "intf%d decoded packet: ", intf);
+ for (i = 0; i < len; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+ }
+
+ press_type = imon_parse_press_type(ictx, buf, ksrc);
+ if (press_type < 0)
+ goto not_input_data;
+
+ /* KEY_MUTE repeats from MCE and knob need to be suppressed */
+ if ((ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode)
+ && (buf[7] == 0xee || ksrc == IMON_BUTTON_MCE)) {
+ do_gettimeofday(&t);
+ msec = tv2int(&t, &prev_time);
+ prev_time = t;
+ if (msec < 200)
+ return;
+ }
+
+ input_report_key(idev, ictx->kc, press_type);
+ input_sync(idev);
+
+ /* panel keys and some remote keys don't generate a release */
+ if (panel_key || norelease) {
+ input_report_key(idev, ictx->kc, 0);
+ input_sync(idev);
+ }
+
+ ictx->last_keycode = ictx->kc;
+
+ return;
+
+not_input_data:
+ if (len != 8) {
+ dev_warn(dev, "imon %s: invalid incoming packet "
+ "size (len = %d, intf%d)\n", __func__, len, intf);
+ return;
+ }
+
+ /* iMON 2.4G associate frame */
+ if (buf[0] == 0x00 &&
+ buf[2] == 0xFF && /* REFID */
+ buf[3] == 0xFF &&
+ buf[4] == 0xFF &&
+ buf[5] == 0xFF && /* iMON 2.4G */
+ ((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */
+ (buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
+ dev_warn(dev, "%s: remote associated refid=%02X\n",
+ __func__, buf[1]);
+ ictx->ir_isassociating = 0;
+ }
+}
+
+/**
+ * mce/rc6 keypresses have no distinct release code, use timer
+ */
+static void imon_mce_timeout(unsigned long data)
+{
+ struct imon_context *ictx = (struct imon_context *)data;
+
+ input_report_key(ictx->idev, ictx->last_keycode, 0);
+ input_sync(ictx->idev);
+}
+
+/**
+ * report touchscreen input
+ */
+static void imon_touch_display_timeout(unsigned long data)
+{
+ struct imon_context *ictx = (struct imon_context *)data;
+
+ if (!ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+ return;
+
+ input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+ input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+ input_report_key(ictx->touch, BTN_TOUCH, 0x00);
+ input_sync(ictx->touch);
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback_intf0(struct urb *urb)
+{
+ struct imon_context *ictx;
+ unsigned char *buf;
+ int len;
+ int intfnum = 0;
+
+ if (!urb)
+ return;
+
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ buf = urb->transfer_buffer;
+ len = urb->actual_length;
+
+ switch (urb->status) {
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case -ESHUTDOWN: /* transport endpoint was shut down */
+ break;
+
+ case 0:
+ imon_incoming_packet(ictx, urb, intfnum);
+ break;
+
+ default:
+ dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+}
+
+static void usb_rx_callback_intf1(struct urb *urb)
+{
+ struct imon_context *ictx;
+ unsigned char *buf;
+ int len;
+ int intfnum = 1;
+
+ if (!urb)
+ return;
+
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ buf = urb->transfer_buffer;
+ len = urb->actual_length;
+
+ switch (urb->status) {
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case -ESHUTDOWN: /* transport endpoint was shut down */
+ break;
+
+ case 0:
+ imon_incoming_packet(ictx, urb, intfnum);
+ break;
+
+ default:
+ dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+}
+
+static struct input_dev *imon_init_idev(struct imon_context *ictx)
+{
+ struct input_dev *idev;
+ int ret, i;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(ictx->dev, "remote input dev allocation failed\n");
+ goto idev_alloc_failed;
+ }
+
+ snprintf(ictx->name_idev, sizeof(ictx->name_idev),
+ "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
+ idev->name = ictx->name_idev;
+
+ usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
+ sizeof(ictx->phys_idev));
+ strlcat(ictx->phys_idev, "/input0", sizeof(ictx->phys_idev));
+ idev->phys = ictx->phys_idev;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+
+ idev->keybit[BIT_WORD(BTN_MOUSE)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+ idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
+ BIT_MASK(REL_WHEEL);
+
+ input_set_drvdata(idev, ictx);
+
+ if (ir_protocol == IMON_IR_PROTOCOL_MCE)
+ ret = sparse_keymap_setup(idev, imon_mce_key_table, NULL);
+ else
+ ret = sparse_keymap_setup(idev, imon_remote_key_table, NULL);
+ if (ret)
+ goto keymap_failed;
+
+ /* can't use sparse keymap atm, 64-bit keycodes */
+ for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+ u16 kc = imon_panel_key_table[i].keycode;
+ __set_bit(kc, idev->keybit);
+ }
+
+ usb_to_input_id(ictx->usbdev_intf0, &idev->id);
+ idev->dev.parent = ictx->dev;
+ ret = input_register_device(idev);
+ if (ret < 0) {
+ dev_err(ictx->dev, "remote input dev register failed\n");
+ goto idev_register_failed;
+ }
+
+ return idev;
+
+idev_register_failed:
+ sparse_keymap_free(idev);
+keymap_failed:
+ input_free_device(idev);
+idev_alloc_failed:
+
+ return NULL;
+}
+
+static struct input_dev *imon_init_touch(struct imon_context *ictx)
+{
+ struct input_dev *touch;
+ int ret;
+
+ touch = input_allocate_device();
+ if (!touch) {
+ dev_err(ictx->dev, "touchscreen input dev allocation failed\n");
+ goto touch_alloc_failed;
+ }
+
+ snprintf(ictx->name_touch, sizeof(ictx->name_touch),
+ "iMON USB Touchscreen (%04x:%04x)",
+ ictx->vendor, ictx->product);
+ touch->name = ictx->name_touch;
+
+ usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
+ sizeof(ictx->phys_touch));
+ strlcat(ictx->phys_touch, "/input1", sizeof(ictx->phys_touch));
+ touch->phys = ictx->phys_touch;
+
+ touch->evbit[0] =
+ BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ touch->keybit[BIT_WORD(BTN_TOUCH)] =
+ BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(touch, ABS_X,
+ 0x00, 0xfff, 0, 0);
+ input_set_abs_params(touch, ABS_Y,
+ 0x00, 0xfff, 0, 0);
+
+ input_set_drvdata(touch, ictx);
+
+ usb_to_input_id(ictx->usbdev_intf1, &touch->id);
+ touch->dev.parent = ictx->dev;
+ ret = input_register_device(touch);
+ if (ret < 0) {
+ dev_info(ictx->dev, "touchscreen input dev register failed\n");
+ goto touch_register_failed;
+ }
+
+ return touch;
+
+touch_register_failed:
+ input_free_device(ictx->touch);
+ mutex_unlock(&ictx->lock);
+
+touch_alloc_failed:
+ return NULL;
+}
+
+static bool imon_find_endpoints(struct imon_context *ictx,
+ struct usb_host_interface *iface_desc)
+{
+ struct usb_endpoint_descriptor *ep;
+ struct usb_endpoint_descriptor *rx_endpoint = NULL;
+ struct usb_endpoint_descriptor *tx_endpoint = NULL;
+ int ifnum = iface_desc->desc.bInterfaceNumber;
+ int num_endpts = iface_desc->desc.bNumEndpoints;
+ int i, ep_dir, ep_type;
+ bool ir_ep_found = 0;
+ bool display_ep_found = 0;
+ bool tx_control = 0;
+
+ /*
+ * Scan the endpoint list and set:
+ * first input endpoint = IR endpoint
+ * first output endpoint = display endpoint
+ */
+ for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+ ep = &iface_desc->endpoint[i].desc;
+ ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (!ir_ep_found && ep_dir == USB_DIR_IN &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+
+ rx_endpoint = ep;
+ ir_ep_found = 1;
+ dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
+
+ } else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+ tx_endpoint = ep;
+ display_ep_found = 1;
+ dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
+ }
+ }
+
+ if (ifnum == 0) {
+ ictx->rx_endpoint_intf0 = rx_endpoint;
+ /*
+ * tx is used to send characters to lcd/vfd, associate RF
+ * remotes, set IR protocol, and maybe more...
+ */
+ ictx->tx_endpoint = tx_endpoint;
+ } else {
+ ictx->rx_endpoint_intf1 = rx_endpoint;
+ }
+
+ /*
+ * If we didn't find a display endpoint, this is probably one of the
+ * newer iMON devices that use control urb instead of interrupt
+ */
+ if (!display_ep_found) {
+ tx_control = 1;
+ display_ep_found = 1;
+ dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
+ "interface OUT endpoint\n", __func__);
+ }
+
+ /*
+ * Some iMON receivers have no display. Unfortunately, it seems
+ * that SoundGraph recycles device IDs between devices both with
+ * and without... :\
+ */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
+ display_ep_found = 0;
+ dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
+ }
+
+ /*
+ * iMON Touch devices have a VGA touchscreen, but no "display", as
+ * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
+ */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ display_ep_found = 0;
+ dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
+ }
+
+ /* Input endpoint is mandatory */
+ if (!ir_ep_found)
+ err("%s: no valid input (IR) endpoint found.", __func__);
+
+ ictx->tx_control = tx_control;
+
+ if (display_ep_found)
+ ictx->display_supported = 1;
+
+ return ir_ep_found;
+
+}
+
+static struct imon_context *imon_init_intf0(struct usb_interface *intf)
+{
+ struct imon_context *ictx;
+ struct urb *rx_urb;
+ struct urb *tx_urb;
+ struct device *dev = &intf->dev;
+ struct usb_host_interface *iface_desc;
+ int ret;
+
+ ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+ if (!ictx) {
+ dev_err(dev, "%s: kzalloc failed for context", __func__);
+ goto exit;
+ }
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
+ goto rx_urb_alloc_failed;
+ }
+ tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!tx_urb) {
+ dev_err(dev, "%s: usb_alloc_urb failed for display urb",
+ __func__);
+ goto tx_urb_alloc_failed;
+ }
+
+ mutex_init(&ictx->lock);
+
+ mutex_lock(&ictx->lock);
+
+ if (ir_protocol == IMON_IR_PROTOCOL_MCE) {
+ init_timer(&ictx->itimer);
+ ictx->itimer.data = (unsigned long)ictx;
+ ictx->itimer.function = imon_mce_timeout;
+ }
+
+ ictx->dev = dev;
+ ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
+ ictx->dev_present_intf0 = 1;
+ ictx->rx_urb_intf0 = rx_urb;
+ ictx->tx_urb = tx_urb;
+
+ ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
+ ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
+
+ iface_desc = intf->cur_altsetting;
+ if (!imon_find_endpoints(ictx, iface_desc))
+ goto find_endpoint_failed;
+
+ ictx->idev = imon_init_idev(ictx);
+ if (!ictx->idev) {
+ dev_err(dev, "%s: input device setup failed\n", __func__);
+ goto idev_setup_failed;
+ }
+
+ usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+ usb_rcvintpipe(ictx->usbdev_intf0,
+ ictx->rx_endpoint_intf0->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf0, ictx,
+ ictx->rx_endpoint_intf0->bInterval);
+
+ ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
+ if (ret) {
+ err("%s: usb_submit_urb failed for intf0 (%d)",
+ __func__, ret);
+ goto urb_submit_failed;
+ }
+
+ return ictx;
+
+urb_submit_failed:
+ sparse_keymap_free(ictx->idev);
+ input_unregister_device(ictx->idev);
+ input_free_device(ictx->idev);
+idev_setup_failed:
+find_endpoint_failed:
+ mutex_unlock(&ictx->lock);
+ usb_free_urb(tx_urb);
+tx_urb_alloc_failed:
+ usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+ kfree(ictx);
+exit:
+ dev_err(dev, "unable to initialize intf0, err %d\n", ret);
+
+ return NULL;
+}
+
+static struct imon_context *imon_init_intf1(struct usb_interface *intf,
+ struct imon_context *ictx)
+{
+ struct urb *rx_urb;
+ struct usb_host_interface *iface_desc;
+ int ret;
+
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ err("%s: usb_alloc_urb failed for IR urb", __func__);
+ ret = -ENOMEM;
+ goto rx_urb_alloc_failed;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ init_timer(&ictx->ttimer);
+ ictx->ttimer.data = (unsigned long)ictx;
+ ictx->ttimer.function = imon_touch_display_timeout;
+ }
+
+ ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
+ ictx->dev_present_intf1 = 1;
+ ictx->rx_urb_intf1 = rx_urb;
+
+ iface_desc = intf->cur_altsetting;
+ if (!imon_find_endpoints(ictx, iface_desc))
+ goto find_endpoint_failed;
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ ictx->touch = imon_init_touch(ictx);
+ if (!ictx->touch)
+ goto touch_setup_failed;
+ } else
+ ictx->touch = NULL;
+
+ usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+ usb_rcvintpipe(ictx->usbdev_intf1,
+ ictx->rx_endpoint_intf1->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf1, ictx,
+ ictx->rx_endpoint_intf1->bInterval);
+
+ ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
+
+ if (ret) {
+ err("%s: usb_submit_urb failed for intf1 (%d)",
+ __func__, ret);
+ goto urb_submit_failed;
+ }
+
+ return ictx;
+
+urb_submit_failed:
+ if (ictx->touch) {
+ input_unregister_device(ictx->touch);
+ input_free_device(ictx->touch);
+ }
+touch_setup_failed:
+find_endpoint_failed:
+ mutex_unlock(&ictx->lock);
+ usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+ dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+
+ return NULL;
+}
+
+static void imon_set_display_type(struct imon_context *ictx,
+ struct usb_interface *intf)
+{
+ int configured_display_type = IMON_DISPLAY_TYPE_VFD;
+
+ /*
+ * Try to auto-detect the type of display if the user hasn't set
+ * it by hand via the display_type modparam. Default is VFD.
+ */
+ if (display_type == IMON_DISPLAY_TYPE_AUTO) {
+ if (usb_match_id(intf, lcd_device_list))
+ configured_display_type = IMON_DISPLAY_TYPE_LCD;
+ else if (usb_match_id(intf, imon_touchscreen_list))
+ configured_display_type = IMON_DISPLAY_TYPE_VGA;
+ else if (usb_match_id(intf, ir_only_list))
+ configured_display_type = IMON_DISPLAY_TYPE_NONE;
+ else
+ configured_display_type = IMON_DISPLAY_TYPE_VFD;
+ } else {
+ configured_display_type = display_type;
+ dev_dbg(ictx->dev, "%s: overriding display type to %d via "
+ "modparam\n", __func__, display_type);
+ }
+
+ ictx->display_type = configured_display_type;
+}
+
+static void imon_init_display(struct imon_context *ictx,
+ struct usb_interface *intf)
+{
+ int ret;
+ const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x88 };
+
+ dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
+
+ /* set up sysfs entry for built-in clock */
+ ret = sysfs_create_group(&intf->dev.kobj,
+ &imon_display_attribute_group);
+ if (ret)
+ dev_err(ictx->dev, "Could not create display sysfs "
+ "entries(%d)", ret);
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+ ret = usb_register_dev(intf, &imon_lcd_class);
+ else
+ ret = usb_register_dev(intf, &imon_vfd_class);
+ if (ret)
+ /* Not a fatal error, so ignore */
+ dev_info(ictx->dev, "could not get a minor number for "
+ "display\n");
+
+ /* Enable front-panel buttons and/or knobs */
+ memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
+ ret = send_packet(ictx);
+ /* Not fatal, but warn about it */
+ if (ret)
+ dev_info(ictx->dev, "failed to enable front-panel "
+ "buttons and/or knobs\n");
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int __devinit imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = NULL;
+ struct usb_host_interface *iface_desc = NULL;
+ struct usb_interface *first_if;
+ struct device *dev = &interface->dev;
+ int ifnum, code_length, sysfs_err;
+ int ret = 0;
+ struct imon_context *ictx = NULL;
+ struct imon_context *first_if_ctx = NULL;
+ u16 vendor, product;
+
+ code_length = BUF_CHUNK_SIZE * 8;
+
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
+ iface_desc = interface->cur_altsetting;
+ ifnum = iface_desc->desc.bInterfaceNumber;
+ vendor = le16_to_cpu(usbdev->descriptor.idVendor);
+ product = le16_to_cpu(usbdev->descriptor.idProduct);
+
+ dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+ __func__, vendor, product, ifnum);
+
+ /* prevent races probing devices w/multiple interfaces */
+ mutex_lock(&driver_lock);
+
+ first_if = usb_ifnum_to_if(usbdev, 0);
+ first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
+
+
+ if (ifnum == 0) {
+ ictx = imon_init_intf0(interface);
+ if (!ictx) {
+ err("%s: failed to initialize context!\n", __func__);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ imon_set_display_type(ictx, interface);
+
+ if (ictx->display_supported)
+ imon_init_display(ictx, interface);
+
+ if (product == 0xffdc) {
+ /* RF products *also* use 0xffdc... sigh... */
+ sysfs_err = sysfs_create_group(&interface->dev.kobj,
+ &imon_rf_attribute_group);
+ if (sysfs_err)
+ err("%s: Could not create RF sysfs entries(%d)",
+ __func__, sysfs_err);
+ }
+
+ } else {
+ /* this is the secondary interface on the device */
+ ictx = imon_init_intf1(interface, first_if_ctx);
+ if (!ictx) {
+ err("%s: failed to attach to context!\n", __func__);
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ }
+
+ usb_set_intfdata(interface, ictx);
+
+ /* set IR protocol/remote type */
+ imon_set_ir_protocol(ictx);
+
+ dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+ "usb<%d:%d> initialized\n", vendor, product, ifnum,
+ usbdev->bus->busnum, usbdev->devnum);
+
+ mutex_unlock(&ictx->lock);
+ mutex_unlock(&driver_lock);
+
+ return 0;
+
+fail:
+ mutex_unlock(&driver_lock);
+ dev_err(dev, "unable to register, err %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void __devexit imon_disconnect(struct usb_interface *interface)
+{
+ struct imon_context *ictx;
+ struct device *dev;
+ int ifnum;
+
+ /* prevent races with multi-interface device probing and display_open */
+ mutex_lock(&driver_lock);
+
+ ictx = usb_get_intfdata(interface);
+ dev = ictx->dev;
+ ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+ mutex_lock(&ictx->lock);
+
+ /*
+ * sysfs_remove_group is safe to call even if sysfs_create_group
+ * hasn't been called
+ */
+ sysfs_remove_group(&interface->dev.kobj,
+ &imon_display_attribute_group);
+ sysfs_remove_group(&interface->dev.kobj,
+ &imon_rf_attribute_group);
+
+ usb_set_intfdata(interface, NULL);
+
+ /* Abort ongoing write */
+ if (ictx->tx.busy) {
+ usb_kill_urb(ictx->tx_urb);
+ complete_all(&ictx->tx.finished);
+ }
+
+ if (ifnum == 0) {
+ ictx->dev_present_intf0 = 0;
+ usb_kill_urb(ictx->rx_urb_intf0);
+ sparse_keymap_free(ictx->idev);
+ input_unregister_device(ictx->idev);
+ if (ictx->display_supported) {
+ if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+ usb_deregister_dev(interface, &imon_lcd_class);
+ else
+ usb_deregister_dev(interface, &imon_vfd_class);
+ }
+ } else {
+ ictx->dev_present_intf1 = 0;
+ usb_kill_urb(ictx->rx_urb_intf1);
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+ input_unregister_device(ictx->touch);
+ }
+
+ if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) {
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+ del_timer_sync(&ictx->ttimer);
+ mutex_unlock(&ictx->lock);
+ if (!ictx->display_isopen)
+ free_imon_context(ictx);
+ } else {
+ if (ictx->ir_protocol == IMON_IR_PROTOCOL_MCE)
+ del_timer_sync(&ictx->itimer);
+ mutex_unlock(&ictx->lock);
+ }
+
+ mutex_unlock(&driver_lock);
+
+ dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
+ __func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct imon_context *ictx = usb_get_intfdata(intf);
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ if (ifnum == 0)
+ usb_kill_urb(ictx->rx_urb_intf0);
+ else
+ usb_kill_urb(ictx->rx_urb_intf1);
+
+ return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+ int rc = 0;
+ struct imon_context *ictx = usb_get_intfdata(intf);
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ if (ifnum == 0) {
+ usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+ usb_rcvintpipe(ictx->usbdev_intf0,
+ ictx->rx_endpoint_intf0->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf0, ictx,
+ ictx->rx_endpoint_intf0->bInterval);
+
+ rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+
+ } else {
+ usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+ usb_rcvintpipe(ictx->usbdev_intf1,
+ ictx->rx_endpoint_intf1->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf1, ictx,
+ ictx->rx_endpoint_intf1->bInterval);
+
+ rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+ }
+
+ return rc;
+}
+
+static int __init imon_init(void)
+{
+ int rc;
+
+ rc = usb_register(&imon_driver);
+ if (rc) {
+ err("%s: usb register failed(%d)", __func__, rc);
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+static void __exit imon_exit(void)
+{
+ usb_deregister(&imon_driver);
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
--
Jarod Wilson
jarod@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
