Re: [PATCH] TiVo USB IR Dongle support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 14, 2009 at 02:28:43PM -0800, Dmitry Torokhov wrote:
> On Mon, Dec 14, 2009 at 05:00:59PM -0500, Chaogui Zhang wrote:
> > +	{ KE_KEY, 0x28, { KEY_1 } },
> > +	{ KE_KEY, 0x29, { KEY_2 } },
> > +	{ KE_KEY, 0x2a, { KEY_3 } },
> > +	{ KE_KEY, 0x2b, { KEY_4 } },
> > +	{ KE_KEY, 0x2c, { KEY_5 } },
> > +	{ KE_KEY, 0x2d, { KEY_6 } },
> > +	{ KE_KEY, 0x2e, { KEY_7 } },
> > +	{ KE_KEY, 0x2f, { KEY_8 } },
> > +	{ KE_KEY, 0x30, { KEY_9 } },
> > +	{ KE_KEY, 0x31, { KEY_0 } },
> 
> Hm, I forgot to mention this in my previous mail - I am trying to move
> RC and phones to KEY_NUMERIC_X keycodes which are supposed to be
> independent on state of shift and NumLock. I will change it locally -
> and if users want old definitions - why, EVIOSKEYCODE now works ;)
> 

> > +		sparse_keymap_report_entry(input, key, 1, !remote->repeat);
> 
> Should not this be
> 
> 		sparse_keymap_report_entry(input, key, remote->repeat, false);
> 
> ?
> 
> In fact remote->repeat  is more like "button down", not necessarily
> repeat, right? I also do not see the readon for keeping it in the device
> structure, you can simply pass it in tivoir_report_key(), can't you?
> 

Hi, Dmitry,

Sorry that I accidentally dropped the list from the cc in my last reply.

I have changed the numbers 0-9 to KEY_NUMERIC_X keycodes and removed the remote->repeat 
from the device struct. Please review and let me know what you think.

Thanks again!

--
Chaogui


Signed-off-by: Chaogui Zhang <czhang@xxxxxxxxxxxx>

---

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 16ec523..e392959 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -149,6 +149,20 @@ config INPUT_KEYSPAN_REMOTE
 	  To compile this driver as a module, choose M here: the module will
 	  be called keyspan_remote.
 
+config INPUT_TIVOIR
+	tristate "TiVo USB IR Dongle (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to use the TiVo USB IR Dongle. It works with
+	  the bundled TiVo remote and this driver maps all buttons to keypress
+	  events.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called tivoir.
+
 config INPUT_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB_ARCH_HAS_HCD
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a8b8485..b449048 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_TIVOIR)		+= tivoir.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
diff --git a/drivers/input/misc/tivoir.c b/drivers/input/misc/tivoir.c
new file mode 100644
index 0000000..817c54c
--- /dev/null
+++ b/drivers/input/misc/tivoir.c
@@ -0,0 +1,583 @@
+/*
+ * 	tivoir.c: Input driver for the USB TiVo PC IR Dongle
+ *
+ * 	Copyright (C) 2009 Chaogui Zhang (czhang@xxxxxxxxxxxx)
+ *
+ *	Based in part on the Keyspan DMR driver (keyspan_remote.c) by
+ *	Michael Downey (downey@xxxxxxxxxx)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/input/sparse-keymap.h>
+
+#define DRIVER_VERSION  "v0.1"
+#define DRIVER_AUTHOR   "Chaogui Zhang <czhang@xxxxxxxxxxxx>"
+#define DRIVER_DESC     "Driver for the TiVo PC IR Dongle."
+#define DRIVER_LICENSE  "GPL v2"
+
+/* Parameters that can be passed to the driver. */
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+/* Vendor and product ids */
+#define USB_TIVOIR_VENDOR_ID		0x105A
+#define USB_TIVOIR_PRODUCT_ID		0x2000
+#define TIVO_REMOTE_ADDR		0x3085
+
+#define TIVOIR_PULSE_BIT	0x80
+#define TIVOIR_PULSE_MASK	0x7f
+#define TIVOIR_RECV_SIZE	32
+#define TIVOIR_BTN_DOWN		1
+#define TIVOIR_WAITING_AGC	0
+#define TIVOIR_WAITING_CODE	1
+#define TIVOIR_WAITING_STOP	2
+
+/*
+ * Table that maps the remote keycodes to input keys.
+ * The comments are the labels on the TiVo remote that came with the dongle.
+ */
+static const struct key_entry tivoir_key_table[] = {
+	{ KE_KEY, 0x09, { KEY_MENU } },		/* TiVo Logo */
+	{ KE_KEY, 0x10, { KEY_POWER2 } },	/* TV Power */
+	{ KE_KEY, 0x11, { KEY_TV } },		/* Live TV/Swap */
+	{ KE_KEY, 0x13, { KEY_INFO } },
+	{ KE_KEY, 0x14, { KEY_UP } },
+	{ KE_KEY, 0x15, { KEY_RIGHT } },
+	{ KE_KEY, 0x16, { KEY_DOWN } },
+	{ KE_KEY, 0x17, { KEY_LEFT } },
+	{ KE_KEY, 0x18, { KEY_RED } },		/* Thumb down */
+	{ KE_KEY, 0x19, { KEY_SELECT } },
+	{ KE_KEY, 0x1a, { KEY_GREEN } },	/* Thumb up */
+	{ KE_KEY, 0x1b, { KEY_MUTE } },
+	{ KE_KEY, 0x1c, { KEY_VOLUMEUP } },
+	{ KE_KEY, 0x1d, { KEY_VOLUMEDOWN } },
+	{ KE_KEY, 0x1e, { KEY_CHANNELUP } },
+	{ KE_KEY, 0x1f, { KEY_CHANNELDOWN } },
+	{ KE_KEY, 0x20, { KEY_RECORD } },
+	{ KE_KEY, 0x21, { KEY_PLAY } },
+	{ KE_KEY, 0x22, { KEY_REWIND } },
+	{ KE_KEY, 0x23, { KEY_PAUSE } },
+	{ KE_KEY, 0x24, { KEY_FASTFORWARD } },
+	{ KE_KEY, 0x25, { KEY_SLOW } },
+	{ KE_KEY, 0x26, { KEY_FRAMEBACK } },	/* TiVo quick replay */
+	{ KE_KEY, 0x27, { KEY_FRAMEFORWARD } },	/* Skip */
+	{ KE_KEY, 0x28, { KEY_NUMERIC_1 } },
+	{ KE_KEY, 0x29, { KEY_NUMERIC_2 } },
+	{ KE_KEY, 0x2a, { KEY_NUMERIC_3 } },
+	{ KE_KEY, 0x2b, { KEY_NUMERIC_4 } },
+	{ KE_KEY, 0x2c, { KEY_NUMERIC_5 } },
+	{ KE_KEY, 0x2d, { KEY_NUMERIC_6 } },
+	{ KE_KEY, 0x2e, { KEY_NUMERIC_7 } },
+	{ KE_KEY, 0x2f, { KEY_NUMERIC_8 } },
+	{ KE_KEY, 0x30, { KEY_NUMERIC_9 } },
+	{ KE_KEY, 0x31, { KEY_NUMERIC_0 } },
+	{ KE_KEY, 0x32, { KEY_CLEAR } },
+	{ KE_KEY, 0x33, { KEY_ENTER } },
+	{ KE_KEY, 0x34, { KEY_VIDEO } },	/* TV Input */
+	{ KE_KEY, 0x36, { KEY_EPG } },		/* Guide */
+	{ KE_KEY, 0x44, { KEY_ZOOM } },		/* Aspect */
+	{ KE_KEY, 0x48, { KEY_STOP } },
+	{ KE_KEY, 0x4a, { KEY_DVD } },		/* DVD Menu */
+	{ KE_KEY, 0x5f, { KEY_CYCLEWINDOWS } },	/* Window */
+	{ KE_END, 0}
+};
+
+/* table of devices that work with this driver */
+static struct usb_device_id tivoir_table[] = {
+	{USB_DEVICE(USB_TIVOIR_VENDOR_ID, USB_TIVOIR_PRODUCT_ID)},
+	{}			/* Terminating entry */
+};
+
+/* Structure to hold all of our driver specific stuff */
+struct usb_tivoir {
+	char name[128];
+	char phys[64];
+	struct usb_device *udev;
+	struct input_dev *input;
+	struct usb_interface *interface;
+	struct usb_endpoint_descriptor *in_endpoint;
+	struct urb *irq_urb;
+	dma_addr_t in_dma;
+	unsigned char *in_buffer;
+
+	/* variables used to parse messages from remote. */
+	int stage;
+	int pulse;
+	int space;
+	u32 code;	/* 32 bit raw code from the remote */
+	int bitcount;
+};
+
+static struct usb_driver tivoir_driver;
+
+/*
+ * Debug routine that prints out what we've received from the remote.
+ */
+static void tivoir_print_packet(struct usb_tivoir *remote)
+{
+	u8 codes[4 * TIVOIR_RECV_SIZE];
+	int i, length;
+
+	/* The lower 5 bits of the first byte of each packet indicates the size
+	 * of the transferred buffer, not including the first byte itself.
+	 */
+
+	length = (remote->in_buffer[0]) & 0x1f;
+	for (i = 0; i <= length; i++)
+		snprintf(codes + i * 3, 4, "%02x ", remote->in_buffer[i]);
+
+	/* 0x80 at the end of a regular packet or in a separate packet
+	   indicates key release */
+
+	if (i < TIVOIR_RECV_SIZE && remote->in_buffer[i] == 0x80)
+		snprintf(codes + i * 3, 4, "%02x ", remote->in_buffer[i]);
+
+	dev_printk(KERN_DEBUG, &remote->udev->dev, "%s: %s\n", __func__, codes);
+}
+
+static inline u16 code_address(u32 code)
+{
+	/* Higher 16 bits of the code is the remote address */
+	return code >> 16;
+}
+
+static inline u8 code_command(u32 code)
+{
+	/* Lower 8 bits of the code is the command */
+	return code & 0xff;
+}
+
+static void tivoir_report_key(struct usb_tivoir *remote, unsigned int btn_down)
+{
+	struct input_dev *input = remote->input;
+	struct key_entry *key;
+
+
+	dev_dbg(&remote->udev->dev, "%s: address = 0x%04x, command = 0x%02x\n",
+		__func__, remote->code >> 16, remote->code & 0xff);
+
+	if (code_address(remote->code) == TIVO_REMOTE_ADDR) {
+		key = sparse_keymap_entry_from_scancode(input,
+						code_command(remote->code));
+		if (!key) {	/* invalid code, do nothing */
+			remote->code = 0;
+			return;
+		}
+		sparse_keymap_report_entry(input, key, btn_down, false);
+	} else {
+		dev_dbg(&remote->udev->dev, "%s: wrong address.\n", __func__);
+		remote->code = 0;
+	}
+}
+
+static inline int is_pulse(u8 code)
+{
+	return code & TIVOIR_PULSE_BIT;
+}
+
+/* Check the inital AGC burst and space value to match the NEC protocol */
+static inline int is_nec(int leadpulse, int leadspace)
+{
+	/* leadpulse should be 9 ms = 9000 us and leadspace should be
+	 * 4.5 ms = 4500 us. We allow +/- 200 microseconds for both.
+	 * Time is measured in units of 50 microseconds.
+	 * 170 == 8800/50, 184 == 9200/50,
+	 * 86 == 4300/50, 94 == 4700/50.
+	 */
+	return (leadpulse >= 170 && leadpulse <= 184) &&
+	       (leadspace >= 86 && leadspace <= 94);
+}
+
+/* Routine that resets the remote data to clean state */
+static inline void reset_remote(struct usb_tivoir *remote)
+{
+	remote->stage = TIVOIR_WAITING_AGC;
+	remote->pulse = 0;
+	remote->space = 0;
+	remote->bitcount = 0;
+	remote->code = 0;
+}
+
+/* Routine that decode pulse/space value into one NEC logic bit */
+static int nec_bit(int pulse, int space)
+{
+	/* Check that pulse is between 0.450ms and 0.650ms.
+	 * NEC protocol says 0.560ms.
+	 */
+	if (pulse < 9 || pulse > 14)
+		return -1;
+
+	/* Space value about 1.690ms (about 33 * 50 micro seconds)
+	 * indicates a 1 bit.
+	 * Space value about 0.560ms (about 11 * 50 micro seconds)
+	 * indicates a 0 bit.
+	 */
+	if (space >= 30 && space <= 35)
+		return 1;	/* logic one */
+	if (space >= 9 && space <= 14)
+		return 0;	/* logic zero */
+
+	return -1;	/* Inappropriate space value for NEC */
+}
+
+/*
+ * Routine that processes each data packet coming in from the remote.
+ */
+static void tivoir_process_packet(struct usb_tivoir *remote)
+{
+	int i, length, bit;
+	u8 code;
+
+	/* Lower 5 bits of the first byte is the length of the packet */
+	length = (remote->in_buffer[0]) & 0x1f;
+
+	if (length == 0) {
+		if (remote->code != 0)
+			tivoir_report_key(remote, !TIVOIR_BTN_DOWN);
+		reset_remote(remote);
+		return;
+	}
+
+	for (i = 1; i <= length; i++) {
+		code = remote->in_buffer[i];
+
+		switch (remote->stage) {
+		case TIVOIR_WAITING_AGC:
+			if (is_pulse(code)) {
+				remote->pulse += code & TIVOIR_PULSE_MASK;
+			} else {
+				remote->space += code;
+				if (is_nec(remote->pulse, remote->space)) {
+					/* Get ready to receive the code */
+					remote->stage = TIVOIR_WAITING_CODE;
+					remote->pulse = 0;
+					remote->space = 0;
+				} else {
+					/* Non NEC remote, ignore the rest
+					 * wait for stop signal
+					 */
+					dev_dbg(&remote->udev->dev,
+						"%s: Non NEC remote.\n",
+						__func__);
+					remote->stage = TIVOIR_WAITING_STOP;
+				}
+			}
+			break;
+
+		case TIVOIR_WAITING_CODE:
+			if (is_pulse(code))
+				remote->pulse = code & TIVOIR_PULSE_MASK;
+			else
+				remote->space = code;
+
+			if (remote->pulse == 0 || remote->space == 0)
+				/* pulse/space not filled in yet */
+				continue;
+
+			bit = nec_bit(remote->pulse, remote->space);
+
+			/* reset pulse/space value after decoding */
+			remote->pulse = 0;
+			remote->space = 0;
+
+			if (bit < 0) {
+				/* Non NEC remote, ignore the rest and
+				 * wait for stop signal.
+				 */
+				remote->stage = TIVOIR_WAITING_STOP;
+				continue;
+			}
+
+			/* A logic 1 or 0 bit detected, store it in
+			 * remote->code.
+			 * First 16 bits are the remote address, LSB first.
+			 * Last 16 bits are the remote command, LSB first.
+			 * We save the address in the higher 16 bits of
+			 * remote->code and the command in the lower 16 bits
+			 * of remote->code.
+			 */
+			if (remote->bitcount < 16)
+				bit = bit << (remote->bitcount + 16);
+			else
+				bit = bit << (remote->bitcount - 16);
+			remote->code |= bit;
+			remote->bitcount++;
+
+			if (remote->bitcount == 32) {
+				/* Received all 32 bits from the remote,
+				 * report the key pressed */
+				tivoir_report_key(remote, TIVOIR_BTN_DOWN);
+				remote->stage = TIVOIR_WAITING_STOP;
+			}
+			break;
+
+		case TIVOIR_WAITING_STOP:	/* waiting for stop signal */
+			if (code == 0x5f) {
+				/* beginning of stop signal, followed by 0x80 */
+				if (i+1 < TIVOIR_RECV_SIZE &&
+				    remote->in_buffer[i+1] == 0x80) {
+					if (remote->code != 0)
+						tivoir_report_key(remote,
+							!TIVOIR_BTN_DOWN);
+					reset_remote(remote);
+				}
+			}
+		}  /* end switch */
+	}  /* end for-loop */
+}
+
+/*
+ * Routine used to handle a new packet that has come in.
+ */
+static void tivoir_irq_recv(struct urb *urb)
+{
+	struct usb_tivoir *dev = urb->context;
+	int i, retval;
+
+	/* Check our status in case we need to bail out early. */
+	switch (urb->status) {
+	case 0:
+		break;
+
+	/* Device went away so don't keep trying to read from it. */
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit;
+		break;
+	}
+
+	if (debug)
+		tivoir_print_packet(dev);
+	tivoir_process_packet(dev);
+
+	for (i = 0; i < TIVOIR_RECV_SIZE; i++)
+		dev->in_buffer[i] = 0;
+
+resubmit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result: %d", __func__,
+		    retval);
+}
+
+static int tivoir_open(struct input_dev *dev)
+{
+	struct usb_tivoir *remote = input_get_drvdata(dev);
+
+	remote->irq_urb->dev = remote->udev;
+	if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void tivoir_close(struct input_dev *dev)
+{
+	struct usb_tivoir *remote = input_get_drvdata(dev);
+
+	usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *tivoir_get_in_endpoint(
+					      struct usb_host_interface *iface)
+{
+	struct usb_endpoint_descriptor *endpoint;
+	int i;
+
+	for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+		endpoint = &iface->endpoint[i].desc;
+
+		if (usb_endpoint_is_int_in(endpoint)) {
+			/* we found our interrupt in endpoint */
+			return endpoint;
+		}
+	}
+
+	return NULL;
+}
+
+/*
+ * Routine that sets up the driver to handle a specific USB device detected
+ * on the bus.
+ */
+static int tivoir_probe(struct usb_interface *interface,
+			const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_tivoir *remote;
+	struct input_dev *input_dev;
+	int error;
+
+	endpoint = tivoir_get_in_endpoint(interface->cur_altsetting);
+	if (!endpoint)
+		return -ENODEV;
+
+	/* The interface descriptor has invalid bInterval setting 0x00 and
+	 * the usb core driver sets it to the default of 32ms, which is too
+	 * big and causes data loss. Set it to 16ms here.
+	 */
+	endpoint->bInterval = 16;
+
+	remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!remote || !input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	error = sparse_keymap_setup(input_dev, tivoir_key_table, NULL);
+	if (error)
+		goto fail1;
+
+	remote->udev = udev;
+	remote->input = input_dev;
+	remote->interface = interface;
+	remote->in_endpoint = endpoint;
+
+	remote->in_buffer =
+	    usb_buffer_alloc(udev, TIVOIR_RECV_SIZE, GFP_ATOMIC,
+				&remote->in_dma);
+	if (!remote->in_buffer) {
+		error = -ENOMEM;
+		goto fail2;
+	}
+
+	remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!remote->irq_urb) {
+		error = -ENOMEM;
+		goto fail3;
+	}
+
+	if (udev->manufacturer)
+		strlcpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(remote->name, " ", sizeof(remote->name));
+		strlcat(remote->name, udev->product, sizeof(remote->name));
+	}
+
+	if (!strlen(remote->name))
+		snprintf(remote->name, sizeof(remote->name),
+			 "USB TiVo PC IR Dongle %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, remote->phys, sizeof(remote->phys));
+	strlcat(remote->phys, "/input0", sizeof(remote->phys));
+
+	input_dev->name = remote->name;
+	input_dev->phys = remote->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &interface->dev;
+	input_set_drvdata(input_dev, remote);
+	input_dev->open = tivoir_open;
+	input_dev->close = tivoir_close;
+
+	/*
+	 * Initialize the URB to access the device.
+	 * The urb gets sent to the device in tivoir_open()
+	 */
+	usb_fill_int_urb(remote->irq_urb,
+			 remote->udev,
+			 usb_rcvintpipe(remote->udev,
+					endpoint->bEndpointAddress),
+			 remote->in_buffer, TIVOIR_RECV_SIZE, tivoir_irq_recv,
+			 remote, endpoint->bInterval);
+	remote->irq_urb->transfer_dma = remote->in_dma;
+	remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* we can register the device now, as it is ready */
+	error = input_register_device(remote->input);
+	if (error)
+		goto fail4;
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, remote);
+
+	return 0;
+
+fail4:
+	usb_free_urb(remote->irq_urb);
+fail3:
+	usb_buffer_free(udev, TIVOIR_RECV_SIZE, remote->in_buffer,
+			remote->in_dma);
+fail2:
+	sparse_keymap_free(input_dev);
+fail1:
+	kfree(remote);
+	input_free_device(input_dev);
+
+	return error;
+}
+
+/*
+ * Routine called when a device is disconnected from the USB.
+ */
+static void tivoir_disconnect(struct usb_interface *interface)
+{
+	struct usb_tivoir *remote;
+
+	remote = usb_get_intfdata(interface);
+
+	sparse_keymap_free(remote->input);
+	usb_set_intfdata(interface, NULL);
+	input_unregister_device(remote->input);
+	usb_kill_urb(remote->irq_urb);
+	usb_free_urb(remote->irq_urb);
+	usb_buffer_free(remote->udev, TIVOIR_RECV_SIZE, remote->in_buffer,
+			remote->in_dma);
+	kfree(remote);
+}
+
+/*
+ * Standard driver set up sections
+ */
+static struct usb_driver tivoir_driver = {
+	.name = "tivoir",
+	.probe = tivoir_probe,
+	.disconnect = tivoir_disconnect,
+	.id_table = tivoir_table
+};
+
+static int __init usb_tivoir_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&tivoir_driver);
+	if (result)
+		err("usb_register failed. Error number %d\n", result);
+
+	return result;
+}
+
+static void __exit usb_tivoir_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&tivoir_driver);
+}
+
+module_init(usb_tivoir_init);
+module_exit(usb_tivoir_exit);
+
+MODULE_DEVICE_TABLE(usb, tivoir_table);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux