Hi Samu,
On Thu, Nov 12, 2009 at 09:44:26AM +0200, Samu Onkalo wrote:
> Provide support for AMI305 / AK8974 magnetometer chips.
> coordinates are provided as polled input device.
> Selftest and noise filtering (polled input device fuzziness)
> are provided via sysfs.
>
> Signed-off-by: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> ---
> drivers/misc/Kconfig | 11 +
> drivers/misc/Makefile | 1 +
> drivers/misc/ami305.c | 644 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/i2c/ami305.h | 22 ++
> 4 files changed, 678 insertions(+), 0 deletions(-)
> create mode 100644 drivers/misc/ami305.c
> create mode 100644 include/linux/i2c/ami305.h
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index df1f86b..d9d0efc 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -246,6 +246,17 @@ config EP93XX_PWM
> To compile this driver as a module, choose M here: the module will
> be called ep93xx_pwm.
>
> +config AMI305
> + tristate "AMI305";
> + depends on I2C
> + default n
> + ---help---
> + Say Y here if you want to build a driver for AMI305 magnetometer
> + chip.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ami305. If unsure, say N here.
> +
> source "drivers/misc/c2port/Kconfig"
> source "drivers/misc/eeprom/Kconfig"
> source "drivers/misc/cb710/Kconfig"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index f982d2e..bb5f969 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_SGI_GRU) += sgi-gru/
> obj-$(CONFIG_HP_ILO) += hpilo.o
> obj-$(CONFIG_ISL29003) += isl29003.o
> obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
> +obj-$(CONFIG_AMI305) += ami305.o
> obj-$(CONFIG_C2PORT) += c2port/
> obj-y += eeprom/
> obj-y += cb710/
> diff --git a/drivers/misc/ami305.c b/drivers/misc/ami305.c
> new file mode 100644
> index 0000000..ead0190
> --- /dev/null
> +++ b/drivers/misc/ami305.c
> @@ -0,0 +1,644 @@
> +/*
> + * ami305.c is driver for AMI305 (Aichi Steel) and
> + * AK8974 (Asahi Kasei EMD Corporation) magnetometer chip
> + *
> + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Samu Onkalo <samu.p.onkalo@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +#include <linux/delay.h>
> +#include <linux/i2c/ami305.h>
> +#include <linux/input-polldev.h>
> +
> +#define DRV_NAME "ami305"
> +
> +/*
> + * 16-bit registers are little-endian. LSB is at the address defined below
> + * and MSB is at the next higher address.
> + */
> +#define AMI305_SELFTEST 0x0C
> +#define AMI305_INFO 0x0D
> +#define AMI305_WHOAMI 0x0F
> +#define AMI305_DATA_X 0x10
> +#define AMI305_DATA_Y 0x12
> +#define AMI305_DATA_Z 0x14
> +#define AMI305_INT_SRC 0x16
> +#define AMI305_STATUS 0x18
> +#define AMI305_INT_CLEAR 0x1A
> +#define AMI305_CTRL1 0x1B
> +#define AMI305_CTRL2 0x1C
> +#define AMI305_CTRL3 0x1D
> +#define AMI305_INT_CTRL 0x1E
> +#define AMI305_OFFSET_X 0x20
> +#define AMI305_OFFSET_Y 0x22
> +#define AMI305_OFFSET_Z 0x24
> +#define AMI305_INT_THRES 0x26 /* absolute any axis value threshold */
> +#define AMI305_PRESET 0x30
> +#define AMI305_TEMP 0x31
> +
> +#define AMI305_SELFTEST_IDLE 0x55
> +#define AMI305_SELFTEST_OK 0xAA
> +
> +#define AMI305_WHOAMI_VALUE_AMI305 0x47
> +#define AMI305_WHOAMI_VALUE_AK8974 0x48
> +
> +#define AMI305_INT_X_HIGH 0x80 /* Axis over +threshold */
> +#define AMI305_INT_Y_HIGH 0x40
> +#define AMI305_INT_Z_HIGH 0x20
> +#define AMI305_INT_X_LOW 0x10 /* Axis below -threshold */
> +#define AMI305_INT_Y_LOW 0x08
> +#define AMI305_INT_Z_LOW 0x04
> +#define AMI305_INT_RANGE 0x02 /* Range overflow (any axis) */
> +
> +#define AMI305_STATUS_DRDY 0x40 /* Data ready */
> +#define AMI305_STATUS_OVERRUN 0x20 /* Data overrun */
> +#define AMI305_STATUS_INT 0x10 /* Interrupt occurred */
> +
> +#define AMI305_CTRL1_POWER 0x80 /* 0 = standby; 1 = active */
> +#define AMI305_CTRL1_RATE 0x10 /* 0 = 10 Hz; 1 = 20 Hz */
> +#define AMI305_CTRL1_FORCE_EN 0x02 /* 0 = normal; 1 = force */
> +#define AMI305_CTRL1_MODE2 0x01 /* 0 */
> +
> +#define AMI305_CTRL2_INT_EN 0x10 /* 1 = enable interrupts */
> +#define AMI305_CTRL2_DRDY_EN 0x08 /* 1 = enable data ready signal */
> +#define AMI305_CTRL2_DRDY_POL 0x04 /* 1 = data ready active high */
> +
> +#define AMI305_CTRL3_RESET 0x80 /* Software reset */
> +#define AMI305_CTRL3_FORCE 0x40 /* Start forced measurement */
> +#define AMI305_CTRL3_SELFTEST 0x10 /* Set selftest register */
> +
> +#define AMI305_INT_CTRL_XEN 0x80 /* Enable interrupt for this axis */
> +#define AMI305_INT_CTRL_YEN 0x40
> +#define AMI305_INT_CTRL_ZEN 0x20
> +#define AMI305_INT_CTRL_XYZEN 0xE0
> +#define AMI305_INT_CTRL_POL 0x08 /* 0 = active low; 1 = active high */
> +#define AMI305_INT_CTRL_PULSE 0x02 /* 0 = latched; 1 = pulse (50 usec) */
> +
> +#define AMI305_MAX_RANGE 2048
> +#define AMI305_THRESHOLD_MAX (AMI305_MAX_RANGE - 1)
> +
> +#define AMI305_POLL_INTERVAL 100 /* ms */
> +#define AMI305_ACTIVATE_DELAY 1 /* ms */
> +#define AMI305_DEFAULT_FUZZ 3 /* input noise filtering */
> +#define AMI305_MEAS_DELAY 6 /* one measurement in ms */
> +#define AMI305_SELFTEST_DELAY 1 /* ms. Spec says 200us min */
> +#define AMI305_RESET_DELAY 5 /* ms */
> +
> +#define AMI305_PWR_ON 1
> +#define AMI305_PWR_OFF 0
> +
> +#define AMI305_MAX_TRY 2
> +
> +struct ami305_chip {
> + struct mutex lock; /* Serialize access to chip */
> + struct mutex users_lock;
> + struct i2c_client *client;
> + struct input_polled_dev *idev; /* input device */
> +
> + int max_range;
> + int users;
> + int fuzz;
> +
> + s16 x, y, z; /* Latest measurements */
> + s8 axis_x;
> + s8 axis_y;
> + s8 axis_z;
> +};
> +
> +static int ami305_write(struct ami305_chip *chip, u8 reg, u8 data)
> +{
> + return i2c_smbus_write_byte_data(chip->client, reg, data);
> +}
> +
> +static int ami305_read(struct ami305_chip *chip, u8 reg)
> +{
> + return i2c_smbus_read_byte_data(chip->client, reg);
> +}
> +
> +static int ami305_read_block(struct ami305_chip *chip, u8 reg,
> + u8 *data, u8 length)
> +{
> + s32 result;
> + result = i2c_smbus_read_i2c_block_data(chip->client,
> + reg, length, data);
> + return result;
> +}
> +
> +static int ami305_power(struct ami305_chip *chip, int poweron)
> +{
> + int r, v;
> +
> + v = poweron ? AMI305_CTRL1_POWER : 0;
> + v = v | AMI305_CTRL1_FORCE_EN;
> + r = ami305_write(chip, AMI305_CTRL1, v);
> + if (r < 0)
> + return r;
> +
> + if (poweron)
> + msleep(AMI305_ACTIVATE_DELAY);
> +
> + return 0;
> +}
> +
> +static int ami305_start_measurement(struct ami305_chip *chip)
> +{
> + int ctrl3;
> + int ret = 0;
> +
> + ctrl3 = ami305_read(chip, AMI305_CTRL3);
> + if (ctrl3 < 0)
> + return ctrl3;
> +
> + ret = ami305_write(chip, AMI305_CTRL3, ctrl3 | AMI305_CTRL3_FORCE);
> +
> + return ret;
> +}
> +
> +static int ami305_reset(struct ami305_chip *chip)
> +{
> + int r = 0;
> +
> + /* Power on to get register access */
> + r = ami305_power(chip, AMI305_PWR_ON);
> + if (r < 0)
> + goto fail;
> +
> + r = ami305_write(chip, AMI305_CTRL3, AMI305_CTRL3_RESET);
> + if (r < 0)
> + goto fail;
> +
> + msleep(AMI305_RESET_DELAY);
> +fail:
> + return r;
> +}
> +
> +static int ami305_add_users(struct ami305_chip *chip)
> +{
> + int r = 0;
> +
> + mutex_lock(&chip->users_lock);
> +
> + if (chip->users == 0) {
> + r = ami305_power(chip, AMI305_PWR_ON);
> + if (r < 0)
> + goto fail;
> + }
> + chip->users++;
> +fail:
> + mutex_unlock(&chip->users_lock);
> + return r;
> +}
> +
> +static int ami305_remove_users(struct ami305_chip *chip)
> +{
> + int r = 0;
> +
> + mutex_lock(&chip->users_lock);
> +
> + if (chip->users != 0)
> + chip->users--;
> +
> + if (chip->users == 0) {
> + r = ami305_power(chip, AMI305_PWR_OFF);
> + if (r < 0)
> + goto fail;
> + }
> +fail:
> + mutex_unlock(&chip->users_lock);
> + return r;
> +}
> +
> +static int ami305_configure(struct ami305_chip *chip)
> +{
> + int err;
> +
> + ami305_reset(chip);
> +
> + ami305_add_users(chip);
> +
> + err = ami305_write(chip, AMI305_CTRL2, AMI305_CTRL2_DRDY_EN);
> + if (err)
> + goto fail;
> +
> + err = ami305_write(chip, AMI305_CTRL3, 0);
> + if (err)
> + goto fail;
> +
> + err = ami305_write(chip, AMI305_INT_CTRL, AMI305_INT_CTRL_POL);
> + if (err)
> + goto fail;
> +
> + err = ami305_write(chip, AMI305_PRESET, 0);
> + if (err)
> + goto fail;
> +
> +fail:
> + ami305_remove_users(chip);
> +
> + return err;
> +}
> +
> +static int ami305_get_axis(s8 axis, s16 hw_values[3])
> +{
> + if (axis > 0)
> + return hw_values[axis - 1];
> + else
> + return -hw_values[-axis - 1];
> +}
> +
> +static int ami305_read_values(struct ami305_chip *chip)
> +{
> + s16 hw_values[3];
> + int i;
> +
> + ami305_start_measurement(chip);
> +
> + i = AMI305_MAX_TRY;
> + do {
> + msleep(AMI305_MEAS_DELAY);
> + if (ami305_read(chip, AMI305_STATUS) & AMI305_STATUS_DRDY)
> + break;
> + i--;
> + } while (i > 0);
> +
> + if (i == 0)
> + return -ENODEV;
> +
> + /* X, Y, Z are in conscutive addresses. 2 * 3 bytes */
> + ami305_read_block(chip, AMI305_DATA_X, (u8 *)hw_values, 6);
> +
> + for (i = 0; i < 3; i++)
> + hw_values[i] = le16_to_cpu(hw_values[i]);
> +
> + chip->x = ami305_get_axis(chip->axis_x, hw_values);
> + chip->y = ami305_get_axis(chip->axis_y, hw_values);
> + chip->z = ami305_get_axis(chip->axis_z, hw_values);
> +
> + return 0;
> +}
> +
> +static int ami305_selftest(struct ami305_chip *chip)
> +{
> + int r;
> + int success = 0;
> +
> + ami305_add_users(chip);
> +
> + r = ami305_read(chip, AMI305_SELFTEST);
> + if (r != AMI305_SELFTEST_IDLE)
> + goto out;
> +
> + r = ami305_read(chip, AMI305_CTRL3);
> + if (r < 0)
> + goto out;
> +
> + r = ami305_write(chip, AMI305_CTRL3, r | AMI305_CTRL3_SELFTEST);
> + if (r < 0)
> + goto out;
> +
> + msleep(AMI305_SELFTEST_DELAY);
> +
> + r = ami305_read(chip, AMI305_SELFTEST);
> + if (r != AMI305_SELFTEST_OK)
> + goto out;
> +
> + r = ami305_read(chip, AMI305_SELFTEST);
> + if (r == AMI305_SELFTEST_IDLE)
> + success = 1;
> +
> + out:
> + ami305_remove_users(chip);
> +
> + return success;
> +}
> +
> +static void ami305_set_input_params(struct ami305_chip *chip, int fuzz)
> +{
> + struct input_dev *input_dev = chip->idev->input;
> + int range;
> +
> + range = chip->max_range;
> + input_set_abs_params(input_dev, ABS_X, -range, range, fuzz, 0);
> + input_set_abs_params(input_dev, ABS_Y, -range, range, fuzz, 0);
> + input_set_abs_params(input_dev, ABS_Z, -range, range, fuzz, 0);
> + chip->fuzz = fuzz;
> +}
> +/*
> + * SYSFS interface
> + */
> +
> +static ssize_t ami305_show_selftest(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ami305_chip *chip = dev_get_drvdata(dev);
> + char *status;
> +
> + mutex_lock(&chip->lock);
> + status = ami305_selftest(chip) ? "OK" : "FAIL";
> + mutex_unlock(&chip->lock);
> +
> + return sprintf(buf, "%s\n", status);
> +}
> +
> +static DEVICE_ATTR(selftest, S_IRUGO, ami305_show_selftest, NULL);
> +
> +static ssize_t ami305_show_active(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ami305_chip *chip = dev_get_drvdata(dev);
> + int status;
> +
> + /* Read from the chip to reflect real state of the HW */
> + status = ami305_read(chip, AMI305_CTRL1) & AMI305_CTRL1_POWER;
Does not this also need chip->lock to make sure we don't interfere with
other I2C operations?
> + return sprintf(buf, "%s\n", status ? "ON" : "OFF");
> +}
> +
> +static DEVICE_ATTR(active, S_IRUGO, ami305_show_active, NULL);
> +
> +static ssize_t ami305_get_fuzz(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct ami305_chip *chip = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%d\n", chip->fuzz);
> +}
> +
> +static ssize_t ami305_set_fuzz(struct device *dev,
> + struct device_attribute *attr, const char *buf,
> + size_t count)
> +{
> + struct ami305_chip *chip = dev_get_drvdata(dev);
> + unsigned long fuzz;
> +
> + if (strict_strtoul(buf, 0, &fuzz))
> + return -EINVAL;
> +
> + if (fuzz > AMI305_MAX_RANGE)
> + return -EINVAL;
> +
> + ami305_set_input_params(chip, fuzz);
> +
> + return count;
> +}
> +
> +static DEVICE_ATTR(fuzz, S_IRUGO | S_IWUSR, ami305_get_fuzz,
> + ami305_set_fuzz);
fuzz (along with absmin, absmax, etc) can already be fetched and
adjusted via EVIOCGABS and EVIOCSABS.
> +
> +static struct attribute *sysfs_attrs[] = {
> + &dev_attr_selftest.attr,
> + &dev_attr_active.attr,
> + &dev_attr_fuzz.attr,
> + NULL
> +};
> +
> +static struct attribute_group ami305_attribute_group = {
> + .attrs = sysfs_attrs
> +};
> +
> +/*
> + * Polled input device interface
> + */
> +
> +static void ami305_poll(struct input_polled_dev *pidev)
> +{
> + struct ami305_chip *chip = pidev->private;
> +
> + mutex_lock(&chip->lock);
> +
> + ami305_read_values(chip);
> + input_report_abs(pidev->input, ABS_X, chip->x);
> + input_report_abs(pidev->input, ABS_Y, chip->y);
> + input_report_abs(pidev->input, ABS_Z, chip->z);
> + input_sync(pidev->input);
> +
> + mutex_unlock(&chip->lock);
> +}
> +
> +static void ami305_open(struct input_polled_dev *pidev)
> +{
> + struct ami305_chip *chip = pidev->private;
> + ami305_add_users(chip);
> + ami305_poll(pidev);
Why do you want to force poll here? I guess I can adjust polldev core
to do the first poll immediately.
> +}
> +
> +static void ami305_close(struct input_polled_dev *pidev)
> +{
> + struct ami305_chip *chip = pidev->private;
> + ami305_remove_users(chip);
> +}
> +
> +int ami305_inputdev_enable(struct ami305_chip *chip)
> +{
> + struct input_dev *input_dev;
> + int err;
> +
> + if (chip->idev)
> + return -EINVAL;
> +
> + chip->idev = input_allocate_polled_device();
> + if (!chip->idev)
> + return -ENOMEM;
> +
> + chip->idev->private = chip;
> + chip->idev->poll = ami305_poll;
> + chip->idev->close = ami305_close;
> + chip->idev->open = ami305_open;
> + chip->idev->poll_interval = AMI305_POLL_INTERVAL;
> +
> + input_dev = chip->idev->input;
> + input_dev->name = "AMI305 / AK8974 Magnetometer";
> + input_dev->phys = DRV_NAME "/input0";
> + input_dev->id.bustype = BUS_HOST;
> + input_dev->id.vendor = 0;
> + input_dev->dev.parent = &chip->client->dev;
> +
> + set_bit(EV_ABS, input_dev->evbit);
> + ami305_set_input_params(chip, AMI305_DEFAULT_FUZZ);
> +
> + err = input_register_polled_device(chip->idev);
> + if (err) {
> + input_free_polled_device(chip->idev);
> + chip->idev = NULL;
> + }
> +
> + return err;
> +}
> +
> +static int __devinit ami305_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ami305_chip *chip;
> + struct ami305_platform_data *pdata;
> + int err = 0;
> + int whoami;
> + int x, y, z;
> +
> + chip = kzalloc(sizeof *chip, GFP_KERNEL);
> + if (!chip)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, chip);
> + chip->client = client;
> +
> + pdata = client->dev.platform_data;
> +
> + x = AMI305_DEV_X;
> + y = AMI305_DEV_Y;
> + z = AMI305_DEV_Z;
> +
> + if (pdata) {
> + /* Remap axes */
> + x = pdata->axis_x ? pdata->axis_x : x;
> + y = pdata->axis_y ? pdata->axis_y : y;
> + z = pdata->axis_z ? pdata->axis_z : z;
> + }
> +
> + if ((abs(x) > 3) | (abs(y) > 3) | (abs(z) > 3)) {
> + dev_err(&client->dev, "Incorrect platform data\n");
> + err = -EINVAL;
> + goto fail1;
> + }
> +
> + chip->axis_x = x;
> + chip->axis_y = y;
> + chip->axis_z = z;
> +
> + chip->max_range = AMI305_MAX_RANGE;
> +
> + mutex_init(&chip->lock);
> + mutex_init(&chip->users_lock);
> +
> + whoami = ami305_read(chip, AMI305_WHOAMI);
> + if (whoami < 0) {
> + dev_err(&client->dev, "device not found\n");
> + err = -ENODEV;
> + goto fail1;
> + }
> +
> + if (whoami == AMI305_WHOAMI_VALUE_AMI305) {
> + dev_dbg(&client->dev, "device is AMI305, ok\n");
> + } else if (whoami == AMI305_WHOAMI_VALUE_AK8974) {
> + dev_dbg(&client->dev, "device is AK8974, ok\n");
> + } else {
> + dev_err(&client->dev, "device is neither AMI305 nor AK8974\n");
> + err = -ENODEV;
> + goto fail1;
> + }
> +
> + err = ami305_configure(chip);
> + if (err)
> + goto fail1;
> +
> + err = ami305_inputdev_enable(chip);
> + if (err) {
> + dev_err(&client->dev, "Cannot setup input device\n");
> + goto fail1;
> + }
> +
> + err = sysfs_create_group(&chip->client->dev.kobj,
> + &ami305_attribute_group);
> + if (err)
> + dev_err(&client->dev, "Sysfs registration failed\n");
> +
> + return err;
> +fail1:
> + kfree(chip);
> + return err;
> +}
> +
> +static int __devexit ami305_remove(struct i2c_client *client)
> +{
> + struct ami305_chip *chip = i2c_get_clientdata(client);
> +
> + sysfs_remove_group(&chip->client->dev.kobj,
> + &ami305_attribute_group);
> + input_unregister_polled_device(chip->idev);
> + input_free_polled_device(chip->idev);
> + kfree(chip);
> + return 0;
> +}
> +
> +#if CONFIG_PM
> +static int ami305_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> + struct ami305_chip *chip = i2c_get_clientdata(client);
> + ami305_power(chip, AMI305_PWR_OFF);
You probably don't want to power itt on if there are no users.
> + return 0;
> +}
> +
> +static int ami305_resume(struct i2c_client *client)
> +{
> + struct ami305_chip *chip = i2c_get_clientdata(client);
> + ami305_power(chip, AMI305_PWR_ON);
> + return 0;
> +}
> +
> +static void ami305_shutdown(struct i2c_client *client)
> +{
> + struct ami305_chip *chip = i2c_get_clientdata(client);
> + ami305_power(chip, AMI305_PWR_OFF);
> +}
> +
> +#else
> +#define ami305_suspend NULL
> +#define ami305_shutdown NULL
> +#define ami305_resume NULL
> +#endif
> +
> +static const struct i2c_device_id ami305_id[] = {
> + {DRV_NAME, 0 },
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, ami305_id);
> +
> +static struct i2c_driver ami305_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .owner = THIS_MODULE,
> + },
> + .suspend = ami305_suspend,
> + .shutdown = ami305_shutdown,
> + .resume = ami305_resume,
> + .probe = ami305_probe,
> + .remove = __devexit_p(ami305_remove),
> + .id_table = ami305_id,
> +};
> +
> +static int __init ami305_init(void)
> +{
> + return i2c_add_driver(&ami305_driver);
> +}
> +
> +static void __exit ami305_exit(void)
> +{
> + i2c_del_driver(&ami305_driver);
> +}
> +
> +MODULE_DESCRIPTION("AMI305 3-axis magnetometer driver");
> +MODULE_AUTHOR("Samu Onkalo, Nokia Corporation");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("i2c:" DRV_NAME);
> +
> +module_init(ami305_init);
> +module_exit(ami305_exit);
> diff --git a/include/linux/i2c/ami305.h b/include/linux/i2c/ami305.h
> new file mode 100644
> index 0000000..6ca1931
> --- /dev/null
> +++ b/include/linux/i2c/ami305.h
> @@ -0,0 +1,22 @@
> +/*
> + * Configuration for AMI305 (and AK8974) magnetometer driver.
> + */
> +
> +#ifndef __LINUX_I2C_AMI305_H
> +#define __LINUX_I2C_AMI305_H
> +
> +#define AMI305_NO_MAP 0
> +#define AMI305_DEV_X 1
> +#define AMI305_DEV_Y 2
> +#define AMI305_DEV_Z 3
> +#define AMI305_INV_DEV_X -1
> +#define AMI305_INV_DEV_Y -2
> +#define AMI305_INV_DEV_Z -3
> +
> +struct ami305_platform_data {
> + s8 axis_x;
> + s8 axis_y;
> + s8 axis_z;
> +};
> +
> +#endif /* __LINUX_I2C_AMI305_H */
> --
> 1.5.6.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
