Re: [PATCH] leds-alix2: add support for button connected to J15

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Fri, 2009-10-16 at 15:03 +0200, Daniel Mack wrote:
> for a project I was working on, we used the J15 connector of the ALIX.2D
> board (which is connected to a GPIO of the CS5536 Geode companion chip)
> for an external button switch.
> 
> I thought it might be worth sharing this piece of code, so others can do
> the same.
> 
> There is, however, a small hardware modification is necessary as the pin
> is also shared as buzzer output. I noted that in the Kconfig entry.
> 
> The patch should go thru Richard's led-2.6.git as it depends on another
> one that has been queued there already.

How common is this modification? I'm just trying to get a feel for the
number of users out there of this feature...

Cheers,

Richard

-- 
Richard Purdie
Intel Open Source Technology Centre

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux