Re: [PATCH] Haptic class support (v2)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kyungmin,

On Tue, Oct 6, 2009 at 1:15 PM, Kyungmin Park <kmpark@xxxxxxxxxxxxx> wrote:
> This patch includes two haptic devices, isa1000 and isa1200
> ISA1000 is gpio based haptic, but isa1200 is based on I2C
> Both are working on Samsung SoCs and tested.
>
> To enable the haptic, echo 1 > /sys/class/haptic/${name}/enable
> You can adjust the level by echo ${level} > /sys/class/haptic/${name}/enable
> or
> With oneshot feature, echo ${msec time} > /sys/class/haptic/${name}/oneshot
>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>

Many thanks for the posting the update and example drivers. Here are
my suggestions to make it mainlined fast:

1. split these patches - probably in following order would be good
   a) haptics class
   b) haptics samsung pwm driver
   c) isa1200 haptics driver
   d) add maintainers entry in MAINTAINERS file under your name for haptics :)
   d) please add short documentation under Documentation/haptics ?
directory describe what haptics class is all about, and atleast
userspace interfaces which you are providing using sysfs file. We can
use led class documentation as example here. Short documentation is
fine to begin with.
   e) if possible create your own git haptics project tree at
kernel.org and add it to linux-next, but I would also suggest that as
no. of updates to these framework will be not so frequent, so we can
also follow -mm route and let Andrew pick up your patches and get them
cooked under -mm.

>
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index 48bbdbe..d44a601 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -62,6 +62,8 @@ source "drivers/power/Kconfig"
>
>  source "drivers/hwmon/Kconfig"
>
> +source "drivers/haptic/Kconfig"
> +
>  source "drivers/thermal/Kconfig"
>
>  source "drivers/watchdog/Kconfig"
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 6ee53c7..16b8f67 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -77,6 +77,7 @@ obj-$(CONFIG_PPS)             += pps/
>  obj-$(CONFIG_W1)               += w1/
>  obj-$(CONFIG_POWER_SUPPLY)     += power/
>  obj-$(CONFIG_HWMON)            += hwmon/
> +obj-$(CONFIG_HAPTIC)           += haptic/
>  obj-$(CONFIG_THERMAL)          += thermal/
>  obj-$(CONFIG_WATCHDOG)         += watchdog/
>  obj-$(CONFIG_PHONE)            += telephony/
> diff --git a/drivers/haptic/Kconfig b/drivers/haptic/Kconfig
> new file mode 100644
> index 0000000..9acb02a
> --- /dev/null
> +++ b/drivers/haptic/Kconfig
> @@ -0,0 +1,31 @@
> +menuconfig HAPTIC
> +       bool "HAPTIC support"
> +       help
> +         Say Y to enalbe haptic support. It enables the haptic and controlled

s/enalbe/enable

> +         from both userspace and kernel

Please explain how from kernel? We are only providing sysfs interface
for this framework, and I don't see in-kernel control of haptics
driver in your patch. Also I don't see any need of in-kernel control
of them though.

> +
> +if HAPTIC
> +
> +config HAPTIC_CLASS
> +       tristate "Haptic Class Support"
> +       help
> +         This option enables the haptic sysfs class in /sys/class/haptic.
> +
> +comment "Haptic drivers"
> +
> +config HAPTIC_SAMSUNG_PWM
> +       tristate "Haptic Support for SAMSUNG PWM-controlled motor (ISA1000)"
> +       depends on HAPTIC_CLASS && (ARCH_S3C64XX || ARCH_S5PC1XX)
> +       help
> +         This options enables support for haptic connected to GPIO lines
> +         controlled by a PWM timer on SAMSUNG CPUs.
> +
> +comment "Haptic chips"
> +
> +config HAPTIC_ISA1200
> +       tristate "Haptic Motor"
> +       depends on HAPTIC_CLASS && I2C
> +       help
> +         The ISA1200 is a high performance enhanced haptic motor driver

This chip also seems to support external pwm mode like isa1000, so you
could explicitly add that this driver is about controlling it through
i2c only, but there could be a possibility of writing the same through
external pwm mode also.

> +
> +static int samsung_pwm_haptic_probe(struct platform_device *pdev)
> +{

__devinit?

> +       struct haptic_platform_data *pdata = pdev->dev.platform_data;
> +       struct samsung_pwm_haptic *haptic;
> +       int ret;
> +
> +       haptic = kzalloc(sizeof(struct samsung_pwm_haptic), GFP_KERNEL);
> +       if (!haptic) {
> +               dev_err(&pdev->dev, "No memory for device\n");
> +               return -ENOMEM;
> +       }
> +static int samsung_pwm_haptic_remove(struct platform_device *pdev)
> +{

__devexit

> +
> +static int __devexit isa1200_remove(struct i2c_client *client)
> +{
> +       return 0;

nothing to remove?

> +}
> +
> +static int isa1200_suspend(struct i2c_client *client, pm_message_t mesg)
> +{
> +       struct isa1200_chip *chip = i2c_get_clientdata(client);
> +       isa1200_chip_power_off(chip);
> +       return 0;
> +}
> +
> +static int isa1200_resume(struct i2c_client *client)
> +{
> +       isa1200_setup(client);
> +       return 0;
> +}

#ifdef CONFIG_PM checks please.


-- 
---Trilok Soni
http://triloksoni.wordpress.com
http://www.linkedin.com/in/triloksoni
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux