Hi Joonyoung,
On Mon, Sep 07, 2009 at 02:38:27PM +0900, Joonyoung Shim wrote:
> +
> +static irqreturn_t samsung_kp_interrupt(int irq, void *dev_id)
> +{
> + struct samsung_keypad *keypad = dev_id;
> +
> + if (!work_pending(&keypad->work.work)) {
> + disable_irq_nosync(keypad->irq);
> + atomic_inc(&keypad->irq_disable);
> + schedule_delayed_work(&keypad->work, msecs_to_jiffies(10));
Why do you need to have the delayed work? Can't we query the touchpad
state immediately? Or are you trying to implement debounce logic?
Also, the driver seems to be using the edge-triggered interrupts;
do you really need to disable IRQ until you scan the keypad?
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit samsung_kp_probe(struct platform_device *pdev)
> +{
> + const struct samsung_keypad_platdata *pdata;
> + struct samsung_keypad *keypad;
> + struct resource *res;
> + struct input_dev *input_dev;
> + unsigned short *keycodes;
> + unsigned int max_keymap_size;
> + unsigned int val;
> + int i;
> + int ret;
> +
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "no platform data defined\n");
> + return -EINVAL;
> + }
> +
> + if ((pdata->num_rows <= 0) || (pdata->num_rows > SAMSUNG_MAX_ROWS))
> + return -EINVAL;
> +
> + if ((pdata->num_cols <= 0) || (pdata->num_cols > SAMSUNG_MAX_COLS))
> + return -EINVAL;
> +
> + /* initialize the gpio */
> + if (pdata->cfg_gpio)
> + pdata->cfg_gpio(pdata->num_rows, pdata->num_cols);
> +
> + max_keymap_size = pdata->num_rows * pdata->num_cols;
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + keycodes = devm_kzalloc(&pdev->dev,
> + max_keymap_size * sizeof(*keycodes), GFP_KERNEL);
> + input_dev = input_allocate_device();
> + if (!keypad || !keycodes || !input_dev)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + ret = -ENODEV;
> + goto err_free_mem;
> + }
> +
> + keypad->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> + if (!keypad->base) {
> + ret = -EBUSY;
> + goto err_free_mem;
> + }
> +
> + if (pdata->clock) {
> + keypad->clk = clk_get(&pdev->dev, pdata->clock);
> + if (IS_ERR(keypad->clk)) {
> + dev_err(&pdev->dev, "failed to get keypad clk\n");
> + ret = PTR_ERR(keypad->clk);
> + goto err_unmap_base;
> + }
> + clk_enable(keypad->clk);
> + }
> +
> + keypad->input_dev = input_dev;
> + keypad->keycodes = keycodes;
> + keypad->num_cols = pdata->num_cols;
> + INIT_DELAYED_WORK(&keypad->work, samsung_kp_scan);
> +
> + /* enable interrupt and debouncing filter and wakeup bit */
> + val = SAMSUNG_INT_F_EN | SAMSUNG_INT_R_EN | SAMSUNG_DF_EN |
> + SAMSUNG_WAKEUPEN;
> + writel(val, keypad->base + SAMSUNG_KEYIFCON);
> +
> + keypad->irq = platform_get_irq(pdev, 0);
> + if (keypad->irq < 0) {
> + ret = keypad->irq;
> + goto err_disable_clk;
> + }
> +
> + ret = devm_request_irq(&pdev->dev, keypad->irq,
> + samsung_kp_interrupt,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> + dev_name(&pdev->dev), keypad);
> +
> + if (ret)
> + goto err_disable_clk;
> +
> + input_dev->name = pdev->name;
> + input_dev->id.bustype = BUS_HOST;
> + input_dev->dev.parent = &pdev->dev;
> + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
> +
> + input_dev->keycode = keycodes;
> + input_dev->keycodesize = sizeof(*keycodes);
> + input_dev->keycodemax = max_keymap_size;
> +
> + for (i = 0; i < pdata->keymap_size; i++) {
> + unsigned int key = pdata->keymap[i];
> + unsigned int row = KEY_ROW(key);
> + unsigned int col = KEY_COL(key);
> + unsigned short code = KEY_VAL(key);
> + unsigned int index = row * keypad->num_cols + col;
> +
> + keycodes[index] = code;
> + set_bit(code, input_dev->keybit);
> + }
> +
> + ret = input_register_device(keypad->input_dev);
> + if (ret)
> + goto err_free_irq;
> +
> + device_init_wakeup(&pdev->dev, 1);
> +
> + platform_set_drvdata(pdev, keypad);
> +
> + return 0;
> +
> +err_free_irq:
> + devm_free_irq(&pdev->dev, keypad->irq, keypad);
If you are using devres why do you release resources manually?
> +err_disable_clk:
> + if (keypad->clk) {
> + clk_disable(keypad->clk);
> + clk_put(keypad->clk);
> + }
> +err_unmap_base:
> + devm_iounmap(&pdev->dev, keypad->base);
> +err_free_mem:
> + input_free_device(input_dev);
> + devm_kfree(&pdev->dev, keycodes);
> + devm_kfree(&pdev->dev, keypad);
> +
> + return ret;
> +}
> +
> +static int __devexit samsung_kp_remove(struct platform_device *pdev)
> +{
> + struct samsung_keypad *keypad = platform_get_drvdata(pdev);
> +
> + devm_free_irq(&pdev->dev, keypad->irq, keypad);
> + cancel_delayed_work_sync(&keypad->work);
Since you need tight control of the ordering between freeing IRQ and
canceling the work you probably should not be using devres for IRQ
allocation.
> +
> + /*
> + * If work indeed has been cancelled, disable_irq() will have been left
> + * unbalanced from samsung_kp_interrupt().
> + */
> + while (atomic_dec_return(&keypad->irq_disable) >= 0)
> + enable_irq(keypad->irq);
> +
> + platform_set_drvdata(pdev, NULL);
> + input_unregister_device(keypad->input_dev);
> +
> + if (keypad->clk) {
> + clk_disable(keypad->clk);
> + clk_put(keypad->clk);
> + }
> +
> + devm_iounmap(&pdev->dev, keypad->base);
> + devm_kfree(&pdev->dev, keypad->keycodes);
> + devm_kfree(&pdev->dev, keypad);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int samsung_kp_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct samsung_keypad *keypad = platform_get_drvdata(pdev);
> +
> + disable_irq(keypad->irq);
> + enable_irq_wake(keypad->irq);
> +
> + if (keypad->clk)
> + clk_disable(keypad->clk);
This should probaly gop into ->close() method.
> +
> + return 0;
> +}
> +
> +static int samsung_kp_resume(struct platform_device *pdev)
> +{
> + struct samsung_keypad *keypad = platform_get_drvdata(pdev);
> + unsigned int val;
> +
> + if (keypad->clk)
> + clk_enable(keypad->clk);
> +
> + /* enable interrupt and debouncing filter and wakeup bit */
> + val = SAMSUNG_INT_F_EN | SAMSUNG_INT_R_EN | SAMSUNG_DF_EN |
> + SAMSUNG_WAKEUPEN;
> + writel(val, keypad->base + SAMSUNG_KEYIFCON);
> +
> + disable_irq_wake(keypad->irq);
> + enable_irq(keypad->irq);
> +
> + return 0;
> +}
> +#else
> +#define samsung_kp_suspend NULL
> +#define samsung_kp_resume NULL
> +#endif
> +
> +static struct platform_driver samsung_kp_driver = {
> + .probe = samsung_kp_probe,
> + .remove = __devexit_p(samsung_kp_remove),
> + .suspend = samsung_kp_suspend,
> + .resume = samsung_kp_resume,
Please switch to dev_pm_ops.
> + .driver = {
> + .name = "samsung-keypad",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init samsung_kp_init(void)
> +{
> + return platform_driver_register(&samsung_kp_driver);
> +}
> +
> +static void __exit samsung_kp_exit(void)
> +{
> + platform_driver_unregister(&samsung_kp_driver);
> +}
> +
> +module_init(samsung_kp_init);
> +module_exit(samsung_kp_exit);
> +
> +MODULE_DESCRIPTION("Samsung keypad driver");
> +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>");
> +MODULE_AUTHOR("Jaehoon Chung <jh80.chung@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 1.6.0.4
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
