Re: Support for synaptic touchscreen in HTC dream

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel,

On Tue, Jul 14, 2009 at 3:36 PM, Pavel Machek<pavel@xxxxxx> wrote:
> From: Arve Hj?nnev?g <arve@xxxxxxxxxxx>
>
> This adds support for synaptic touchscreen, used in HTC dream
> cellphone.
>
> Signed-off-by: Pavel Machek <pavel@xxxxxx>
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index bb6486a..fa3404f 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -206,6 +213,14 @@ config TOUCHSCREEN_MIGOR
>          To compile this driver as a module, choose M here: the
>          module will be called migor_ts.
>
> +config TOUCHSCREEN_SYNAPTICS_I2C_RMI
> +       tristate "Synaptics i2c touchscreen"
> +       depends on I2C
> +       help
> +         This enables support for Synaptics RMI over I2C based touchscreens.
> +         Such touchscreen is used in HTC Dream.
> +
> +
>  config TOUCHSCREEN_TOUCHRIGHT
>        tristate "Touchright serial touchscreen"
>        select SERIO
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index d3375af..959dcda 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -22,6 +23,7 @@ obj-$(CONFIG_TOUCHSCREEN_HP7XX)               += jornada720_ts.o
>  obj-$(CONFIG_TOUCHSCREEN_HTCPEN)       += htcpen.o
>  obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)        += usbtouchscreen.o
>  obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)     += penmount.o
> +obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI)    += synaptics_i2c_rmi.o
>  obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)   += touchit213.o
>  obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)   += touchright.o
>  obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)     += touchwin.o
> diff --git a/drivers/input/touchscreen/synaptics_i2c_rmi.c b/drivers/input/touchscreen/synaptics_i2c_rmi.c
> new file mode 100644
> index 0000000..fe10e85
> --- /dev/null
> +++ b/drivers/input/touchscreen/synaptics_i2c_rmi.c
> @@ -0,0 +1,587 @@
> +/*
> + * Support for synaptics touchscreen.
> + *
> + * Copyright (C) 2007 Google, Inc.
> + * Author: Arve Hj?nnev?g <arve@xxxxxxxxxxx>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/hrtimer.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <linux/synaptics_i2c_rmi.h>
> +
> +static struct workqueue_struct *synaptics_wq;
> +
> +struct synaptics_ts_data {
> +       u16 addr;
> +       struct i2c_client *client;
> +       struct input_dev *input_dev;
> +       int use_irq;
> +       struct hrtimer timer;
> +       struct work_struct  work;
> +       u16 max[2];
> +       int snap_state[2][2];
> +       int snap_down_on[2];
> +       int snap_down_off[2];
> +       int snap_up_on[2];
> +       int snap_up_off[2];
> +       int snap_down[2];
> +       int snap_up[2];
> +       u32 flags;
> +       int (*power)(int on);
> +};
> +
> +static int i2c_set(struct synaptics_ts_data *ts, u8 reg, u8 val, char *msg)
> +{
> +       int ret = i2c_smbus_write_byte_data(ts->client, reg, val);
> +       if (ret < 0)
> +               pr_err("i2c_smbus_write_byte_data failed (%s)\n", msg);
> +       return ret;
> +}
> +
> +static int i2c_read(struct synaptics_ts_data *ts, u8 reg, char *msg)
> +{
> +       int ret = i2c_smbus_read_byte_data(ts->client, 0xf0);
> +       if (ret < 0)
> +               pr_err("i2c_smbus_read_byte_data failed (%s)\n", msg);
> +       return ret;
> +}
> +
> +static int synaptics_init_panel(struct synaptics_ts_data *ts)
> +{
> +       int ret;
> +
> +       ret = i2c_set(ts, 0xff, 0x10, "set page select");
> +       if (ret == 0)
> +               ret = i2c_set(ts, 0x41, 0x04, "set No Clip Z");
> +
> +       ret = i2c_set(ts, 0xff, 0x04, "fallback page select");
> +       ret = i2c_set(ts, 0xf0, 0x81, "select 80 reports per second");
> +       return ret;
> +}
> +

> +static void decode_report(struct synaptics_ts_data *ts, u8 *buf)
> +{

some documentation about this logic would be great.

> +       int pos[2][2];
> +       int f, a;
> +       int base = 2;
> +       int z = buf[1];
> +       int w = buf[0] >> 4;
> +       int finger = buf[0] & 7;
> +       int finger2_pressed;
> +
> +       for (f = 0; f < 2; f++) {
> +               u32 flip_flag = SYNAPTICS_FLIP_X;
> +               for (a = 0; a < 2; a++) {
> +                       int p = buf[base + 1];
> +                       p |= (u16)(buf[base] & 0x1f) << 8;
> +                       if (ts->flags & flip_flag)
> +                               p = ts->max[a] - p;
> +                       if (ts->flags & SYNAPTICS_SNAP_TO_INACTIVE_EDGE) {
> +                               if (ts->snap_state[f][a]) {
> +                                       if (p <= ts->snap_down_off[a])
> +                                               p = ts->snap_down[a];
> +                                       else if (p >= ts->snap_up_off[a])
> +                                               p = ts->snap_up[a];
> +                                       else
> +                                               ts->snap_state[f][a] = 0;
> +                               } else {
> +                                       if (p <= ts->snap_down_on[a]) {
> +                                               p = ts->snap_down[a];
> +                                               ts->snap_state[f][a] = 1;
> +                                       } else if (p >= ts->snap_up_on[a]) {
> +                                               p = ts->snap_up[a];
> +                                               ts->snap_state[f][a] = 1;
> +                                       }
> +                               }
> +                       }
> +                       pos[f][a] = p;
> +                       base += 2;
> +                       flip_flag <<= 1;
> +               }
> +               base += 2;
> +               if (ts->flags & SYNAPTICS_SWAP_XY)
> +                       swap(pos[f][0], pos[f][1]);
> +       }
> +       if (z) {
> +               input_report_abs(ts->input_dev, ABS_X, pos[0][0]);
> +               input_report_abs(ts->input_dev, ABS_Y, pos[0][1]);
> +       }
> +       input_report_abs(ts->input_dev, ABS_PRESSURE, z);
> +       input_report_abs(ts->input_dev, ABS_TOOL_WIDTH, w);
> +       input_report_key(ts->input_dev, BTN_TOUCH, finger);
> +       finger2_pressed = finger > 1 && finger != 7;
> +       input_report_key(ts->input_dev, BTN_2, finger2_pressed);
> +       if (finger2_pressed) {
> +               input_report_abs(ts->input_dev, ABS_HAT0X, pos[1][0]);
> +               input_report_abs(ts->input_dev, ABS_HAT0Y, pos[1][1]);
> +       }
> +       input_sync(ts->input_dev);
> +}
> +
> +static void synaptics_ts_work_func(struct work_struct *work)
> +{
> +       int i;
> +       int ret;
> +       int bad_data = 0;
> +       struct i2c_msg msg[2];
> +       u8 start_reg = 0;
> +       u8 buf[15];
> +       struct synaptics_ts_data *ts =
> +               container_of(work, struct synaptics_ts_data, work);
> +
> +       msg[0].addr = ts->client->addr;
> +       msg[0].flags = 0;
> +       msg[0].len = 1;
> +       msg[0].buf = &start_reg;
> +       msg[1].addr = ts->client->addr;
> +       msg[1].flags = I2C_M_RD;
> +       msg[1].len = sizeof(buf);
> +       msg[1].buf = buf;
> +
> +       for (i = 0; i < ((ts->use_irq && !bad_data) ? 1 : 10); i++) {
> +               ret = i2c_transfer(ts->client->adapter, msg, 2);
> +               if (ret < 0) {
> +                       printk(KERN_ERR "ts_work: i2c_transfer failed\n");
> +                       bad_data = 1;
> +                       continue;
> +               }
> +               if ((buf[14] & 0xc0) != 0x40) {
> +                       printk(KERN_WARNING "synaptics_ts_work_func:"
> +                              " bad read %x %x %x %x %x %x %x %x %x"
> +                              " %x %x %x %x %x %x, ret %d\n",
> +                              buf[0], buf[1], buf[2], buf[3],
> +                              buf[4], buf[5], buf[6], buf[7],
> +                              buf[8], buf[9], buf[10], buf[11],
> +                              buf[12], buf[13], buf[14], ret);
> +                       if (bad_data)
> +                               synaptics_init_panel(ts);
> +                       bad_data = 1;
> +                       continue;
> +               }
> +               bad_data = 0;
> +               if ((buf[14] & 1) == 0)
> +                       break;
> +
> +               decode_report(ts, buf);
> +       }
> +       if (ts->use_irq)
> +               enable_irq(ts->client->irq);
> +}
> +
> +static enum hrtimer_restart synaptics_ts_timer_func(struct hrtimer *timer)
> +{
> +       struct synaptics_ts_data *ts =
> +               container_of(timer, struct synaptics_ts_data, timer);
> +
> +       queue_work(synaptics_wq, &ts->work);
> +
> +       hrtimer_start(&ts->timer, ktime_set(0, 12500000), HRTIMER_MODE_REL);
> +       return HRTIMER_NORESTART;
> +}
> +
> +static irqreturn_t synaptics_ts_irq_handler(int irq, void *dev_id)
> +{
> +       struct synaptics_ts_data *ts = dev_id;
> +
> +       disable_irq(ts->client->irq);

disable_irq_nosync or convert this to request_threaded_irq(...).
Please see recent discussion on linux-input for MAX key switch
controller.

> +       queue_work(synaptics_wq, &ts->work);
> +       return IRQ_HANDLED;
> +}
> +
> +static int detect(struct synaptics_ts_data *ts, u32 *panel_version)
> +{
> +       int ret;
> +       int retry = 10;
> +
> +       ret = i2c_set(ts, 0xf4, 0x01, "reset device");
> +
> +       while (retry-- > 0) {
> +               ret = i2c_smbus_read_byte_data(ts->client, 0xe4);
> +               if (ret >= 0)
> +                       break;
> +               msleep(100);
> +       }
> +       if (ret < 0) {
> +               pr_err("i2c_smbus_read_byte_data failed\n");
> +               return ret;
> +       }
> +
> +       *panel_version = ret << 8;
> +       ret = i2c_read(ts, 0xe5, "product minor");
> +       if (ret < 0)
> +               return ret;
> +       *panel_version |= ret;
> +
> +       ret = i2c_read(ts, 0xe3, "property");
> +       if (ret < 0)
> +               return ret;
> +
> +       pr_info("synaptics: version %x, product property %x\n",
> +               *panel_version, ret);
> +       return 0;
> +}
> +
> +static void compute_areas(struct synaptics_ts_data *ts,
> +                         struct synaptics_i2c_rmi_platform_data *pdata,
> +                         u16 max_x, u16 max_y)
> +{
> +       u32 inactive_area_left;
> +       u32 inactive_area_right;
> +       u32 inactive_area_top;
> +       u32 inactive_area_bottom;
> +       u32 snap_left_on;
> +       u32 snap_left_off;
> +       u32 snap_right_on;
> +       u32 snap_right_off;
> +       u32 snap_top_on;
> +       u32 snap_top_off;
> +       u32 snap_bottom_on;
> +       u32 snap_bottom_off;
> +       u32 fuzz_x;
> +       u32 fuzz_y;
> +       int fuzz_p;
> +       int fuzz_w;
> +       int swapped = !!(ts->flags & SYNAPTICS_SWAP_XY);
> +
> +       inactive_area_left = pdata->inactive_left;
> +       inactive_area_right = pdata->inactive_right;
> +       inactive_area_top = pdata->inactive_top;
> +       inactive_area_bottom = pdata->inactive_bottom;
> +       snap_left_on = pdata->snap_left_on;
> +       snap_left_off = pdata->snap_left_off;
> +       snap_right_on = pdata->snap_right_on;
> +       snap_right_off = pdata->snap_right_off;
> +       snap_top_on = pdata->snap_top_on;
> +       snap_top_off = pdata->snap_top_off;
> +       snap_bottom_on = pdata->snap_bottom_on;
> +       snap_bottom_off = pdata->snap_bottom_off;
> +       fuzz_x = pdata->fuzz_x;
> +       fuzz_y = pdata->fuzz_y;
> +       fuzz_p = pdata->fuzz_p;
> +       fuzz_w = pdata->fuzz_w;
> +
> +       inactive_area_left = inactive_area_left * max_x / 0x10000;
> +       inactive_area_right = inactive_area_right * max_x / 0x10000;
> +       inactive_area_top = inactive_area_top * max_y / 0x10000;
> +       inactive_area_bottom = inactive_area_bottom * max_y / 0x10000;
> +       snap_left_on = snap_left_on * max_x / 0x10000;
> +       snap_left_off = snap_left_off * max_x / 0x10000;
> +       snap_right_on = snap_right_on * max_x / 0x10000;
> +       snap_right_off = snap_right_off * max_x / 0x10000;
> +       snap_top_on = snap_top_on * max_y / 0x10000;
> +       snap_top_off = snap_top_off * max_y / 0x10000;
> +       snap_bottom_on = snap_bottom_on * max_y / 0x10000;
> +       snap_bottom_off = snap_bottom_off * max_y / 0x10000;
> +       fuzz_x = fuzz_x * max_x / 0x10000;
> +       fuzz_y = fuzz_y * max_y / 0x10000;
> +
> +
> +       ts->snap_down[swapped] = -inactive_area_left;
> +       ts->snap_up[swapped] = max_x + inactive_area_right;
> +       ts->snap_down[!swapped] = -inactive_area_top;
> +       ts->snap_up[!swapped] = max_y + inactive_area_bottom;
> +       ts->snap_down_on[swapped] = snap_left_on;
> +       ts->snap_down_off[swapped] = snap_left_off;
> +       ts->snap_up_on[swapped] = max_x - snap_right_on;
> +       ts->snap_up_off[swapped] = max_x - snap_right_off;
> +       ts->snap_down_on[!swapped] = snap_top_on;
> +       ts->snap_down_off[!swapped] = snap_top_off;
> +       ts->snap_up_on[!swapped] = max_y - snap_bottom_on;
> +       ts->snap_up_off[!swapped] = max_y - snap_bottom_off;
> +       pr_info("synaptics_ts_probe: max_x %d, max_y %d\n", max_x, max_y);
> +       pr_info("synaptics_ts_probe: inactive_x %d %d, inactive_y %d %d\n",
> +              inactive_area_left, inactive_area_right,
> +              inactive_area_top, inactive_area_bottom);
> +       pr_info("synaptics_ts_probe: snap_x %d-%d %d-%d, snap_y %d-%d %d-%d\n",
> +              snap_left_on, snap_left_off, snap_right_on, snap_right_off,
> +              snap_top_on, snap_top_off, snap_bottom_on, snap_bottom_off);
> +
> +       input_set_abs_params(ts->input_dev, ABS_X,
> +                            -inactive_area_left, max_x + inactive_area_right,
> +                            fuzz_x, 0);
> +       input_set_abs_params(ts->input_dev, ABS_Y,
> +                            -inactive_area_top, max_y + inactive_area_bottom,
> +                            fuzz_y, 0);
> +       input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 255, fuzz_p, 0);
> +       input_set_abs_params(ts->input_dev, ABS_TOOL_WIDTH, 0, 15, fuzz_w, 0);
> +       input_set_abs_params(ts->input_dev, ABS_HAT0X, -inactive_area_left,
> +                            max_x + inactive_area_right, fuzz_x, 0);
> +       input_set_abs_params(ts->input_dev, ABS_HAT0Y, -inactive_area_top,
> +                            max_y + inactive_area_bottom, fuzz_y, 0);
> +}
> +
> +static int synaptics_ts_probe(
> +       struct i2c_client *client, const struct i2c_device_id *id)
> +{

__devinit ?

> +       struct synaptics_ts_data *ts;
> +       u8 buf0[4];
> +       u8 buf1[8];
> +       struct i2c_msg msg[2];
> +       int ret = 0;
> +       struct synaptics_i2c_rmi_platform_data *pdata;
> +       u32 panel_version = 0;
> +       u16 max_x, max_y;
> +
> +       if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {

check for SMBUS? I have added linux-i2c as this driver has i2c bits,
so not removing any code.

> +               printk(KERN_ERR "synaptics_ts_probe: need I2C_FUNC_I2C\n");

dev_xxx/pr_xxx friends?

> +               ret = -ENODEV;
> +               goto err_check_functionality_failed;
> +       }
> +
> +       ts = kzalloc(sizeof(*ts), GFP_KERNEL);
> +       if (ts == NULL) {
> +               ret = -ENOMEM;
> +               goto err_alloc_data_failed;
> +       }
> +       INIT_WORK(&ts->work, synaptics_ts_work_func);
> +       ts->client = client;
> +       i2c_set_clientdata(client, ts);
> +       pdata = client->dev.platform_data;
> +       if (pdata)
> +               ts->power = pdata->power;
> +       else
> +               pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
> +
> +       if (ts->power) {
> +               ret = ts->power(1);
> +               if (ret < 0) {
> +                       printk(KERN_ERR "synaptics_ts_probe power on failed\n");

Ditto.

> +                       goto err_power_failed;
> +               }
> +       }
> +
> +       ret = detect(ts, &panel_version);
> +       if (ret)
> +               goto err_detect_failed;
> +
> +       while (pdata->version > panel_version)
> +               pdata++;
> +       ts->flags = pdata->flags;
> +
> +       ret = i2c_read(ts, 0xf0, "device control");
> +       if (ret < 0)
> +               goto err_detect_failed;
> +       pr_info("synaptics: device control %x\n", ret);
> +
> +       ret = i2c_read(ts, 0xf1, "interrupt enable");
> +       if (ret < 0)
> +               goto err_detect_failed;
> +       pr_info("synaptics_ts_probe: interrupt enable %x\n", ret);
> +
> +       ret = i2c_set(ts, 0xf1, 0, "disable interrupt");
> +       if (ret < 0)
> +               goto err_detect_failed;
> +
> +       msg[0].addr = ts->client->addr;
> +       msg[0].flags = 0;
> +       msg[0].len = 1;
> +       msg[0].buf = buf0;
> +       buf0[0] = 0xe0;
> +       msg[1].addr = ts->client->addr;
> +       msg[1].flags = I2C_M_RD;
> +       msg[1].len = 8;
> +       msg[1].buf = buf1;
> +       ret = i2c_transfer(ts->client->adapter, msg, 2);
> +       if (ret < 0) {
> +               printk(KERN_ERR "i2c_transfer failed\n");
> +               goto err_detect_failed;
> +       }
> +       printk(KERN_INFO "synaptics_ts_probe: 0xe0: %x %x %x %x %x %x %x %x\n",
> +              buf1[0], buf1[1], buf1[2], buf1[3],
> +              buf1[4], buf1[5], buf1[6], buf1[7]);
> +
> +       ret = i2c_set(ts, 0xff, 0x10, "page select = 0x10");
> +       if (ret < 0)
> +               goto err_detect_failed;
> +
> +       ret = i2c_smbus_read_word_data(ts->client, 0x04);
> +       if (ret < 0) {
> +               printk(KERN_ERR "i2c_smbus_read_word_data failed\n");
> +               goto err_detect_failed;
> +       }
> +       ts->max[0] = max_x = (ret >> 8 & 0xff) | ((ret & 0x1f) << 8);
> +       ret = i2c_smbus_read_word_data(ts->client, 0x06);
> +       if (ret < 0) {
> +               printk(KERN_ERR "i2c_smbus_read_word_data failed\n");
> +               goto err_detect_failed;
> +       }
> +       ts->max[1] = max_y = (ret >> 8 & 0xff) | ((ret & 0x1f) << 8);
> +       if (ts->flags & SYNAPTICS_SWAP_XY)
> +               swap(max_x, max_y);
> +
> +       /* will also switch back to page 0x04 */
> +       ret = synaptics_init_panel(ts);
> +       if (ret < 0) {
> +               pr_err("synaptics_init_panel failed\n");
> +               goto err_detect_failed;
> +       }
> +
> +       ts->input_dev = input_allocate_device();
> +       if (ts->input_dev == NULL) {
> +               ret = -ENOMEM;
> +               pr_err("synaptics: Failed to allocate input device\n");
> +               goto err_input_dev_alloc_failed;
> +       }
> +       ts->input_dev->name = "synaptics-rmi-touchscreen";

other parameters of input_dev, like vendor, bus etc.,

> +       set_bit(EV_SYN, ts->input_dev->evbit);
> +       set_bit(EV_KEY, ts->input_dev->evbit);
> +       set_bit(BTN_TOUCH, ts->input_dev->keybit);
> +       set_bit(BTN_2, ts->input_dev->keybit);
> +       set_bit(EV_ABS, ts->input_dev->evbit);
> +

__set_bit or input_set_capability please.

> +       compute_areas(ts, pdata, max_x, max_y);
> +
> +
> +       ret = input_register_device(ts->input_dev);
> +       if (ret) {
> +               pr_err("synaptics: Unable to register %s input device\n",
> +                      ts->input_dev->name);
> +               goto err_input_register_device_failed;
> +       }
> +       if (client->irq) {
> +               ret = request_irq(client->irq, synaptics_ts_irq_handler,
> +                                 0, client->name, ts);
> +               if (ret == 0) {
> +                       ret = i2c_set(ts, 0xf1, 0x01, "enable abs int");
> +                       if (ret)
> +                               free_irq(client->irq, ts);
> +               }
> +               if (ret == 0)
> +                       ts->use_irq = 1;
> +               else
> +                       dev_err(&client->dev, "request_irq failed\n");
> +       }
> +       if (!ts->use_irq) {
> +               hrtimer_init(&ts->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> +               ts->timer.function = synaptics_ts_timer_func;
> +               hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
> +       }
> +
> +       pr_info("synaptics: Start touchscreen %s in %s mode\n",
> +               ts->input_dev->name, ts->use_irq ? "interrupt" : "polling");
> +
> +       return 0;
> +
> + err_input_register_device_failed:
> +       input_free_device(ts->input_dev);
> +
> + err_input_dev_alloc_failed:
> + err_detect_failed:
> + err_power_failed:
> +       kfree(ts);
> + err_alloc_data_failed:
> + err_check_functionality_failed:
> +       return ret;
> +}
> +
> +static int synaptics_ts_remove(struct i2c_client *client)
> +{

__devexit

> +       struct synaptics_ts_data *ts = i2c_get_clientdata(client);
> +
> +       if (ts->use_irq)
> +               free_irq(client->irq, ts);
> +       else
> +               hrtimer_cancel(&ts->timer);
> +       input_unregister_device(ts->input_dev);
> +       kfree(ts);
> +       return 0;
> +}
> +
> +static int synaptics_ts_suspend(struct i2c_client *client, pm_message_t mesg)
> +{

#ifdef CONFIG_PM ?

> +       int ret;
> +       struct synaptics_ts_data *ts = i2c_get_clientdata(client);
> +
> +       if (ts->use_irq)
> +               disable_irq(client->irq);
> +       else
> +               hrtimer_cancel(&ts->timer);
> +       ret = cancel_work_sync(&ts->work);
> +       if (ret && ts->use_irq) /* if work was pending disable-count is now 2 */
> +               enable_irq(client->irq);
> +       i2c_set(ts, 0xf1, 0, "disable interrupt");
> +       i2c_set(ts, 0xf0, 0x86, "deep sleep");
> +
> +       if (ts->power) {
> +               ret = ts->power(0);
> +               if (ret < 0)
> +                       pr_err("synaptics_ts_suspend power off failed\n");
> +       }
> +       return 0;
> +}
> +
> +static int synaptics_ts_resume(struct i2c_client *client)
> +{
> +       int ret;
> +       struct synaptics_ts_data *ts = i2c_get_clientdata(client);
> +
> +       if (ts->power) {
> +               ret = ts->power(1);
> +               if (ret < 0)
> +                       pr_err("synaptics_ts_resume power on failed\n");
> +       }
> +
> +       synaptics_init_panel(ts);
> +
> +       if (ts->use_irq) {
> +               enable_irq(client->irq);
> +               i2c_set(ts, 0xf1, 0x01, "enable abs int");
> +       } else
> +               hrtimer_start(&ts->timer, ktime_set(1, 0), HRTIMER_MODE_REL);
> +
> +       return 0;
> +}
> +
> +
> +static const struct i2c_device_id synaptics_ts_id[] = {
> +       { SYNAPTICS_I2C_RMI_NAME, 0 },
> +       { }
> +};
> +
> +static struct i2c_driver synaptics_ts_driver = {
> +       .probe          = synaptics_ts_probe,
> +       .remove         = synaptics_ts_remove,

__devexit_p

> +       .suspend        = synaptics_ts_suspend,
> +       .resume         = synaptics_ts_resume,
> +       .id_table       = synaptics_ts_id,
> +       .driver = {
> +               .name   = SYNAPTICS_I2C_RMI_NAME,
> +       },
> +};
> +
> +static int __devinit synaptics_ts_init(void)
> +{
> +       synaptics_wq = create_singlethread_workqueue("synaptics_wq");
> +       if (!synaptics_wq)
> +               return -ENOMEM;
> +       return i2c_add_driver(&synaptics_ts_driver);
> +}
> +
> +static void __exit synaptics_ts_exit(void)
> +{
> +       i2c_del_driver(&synaptics_ts_driver);
> +       if (synaptics_wq)
> +               destroy_workqueue(synaptics_wq);
> +}
> +
> +module_init(synaptics_ts_init);
> +module_exit(synaptics_ts_exit);
> +
> +MODULE_DESCRIPTION("Synaptics Touchscreen Driver");
> +MODULE_LICENSE("GPL");

MODULE_ALIAS?

> diff --git a/include/linux/synaptics_i2c_rmi.h b/include/linux/synaptics_i2c_rmi.h
> new file mode 100644
> index 0000000..73e1de7
> --- /dev/null
> +++ b/include/linux/synaptics_i2c_rmi.h
> @@ -0,0 +1,53 @@
> +/*
> + * synaptics_i2c_rmi.h - platform data structure for f75375s sensor
> + *
> + * Copyright (C) 2008 Google, Inc.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef _LINUX_SYNAPTICS_I2C_RMI_H
> +#define _LINUX_SYNAPTICS_I2C_RMI_H
> +
> +#define SYNAPTICS_I2C_RMI_NAME "synaptics-rmi-ts"
> +
> +enum {
> +       SYNAPTICS_FLIP_X = 1UL << 0,
> +       SYNAPTICS_FLIP_Y = 1UL << 1,
> +       SYNAPTICS_SWAP_XY = 1UL << 2,
> +       SYNAPTICS_SNAP_TO_INACTIVE_EDGE = 1UL << 3,
> +};
> +
> +struct synaptics_i2c_rmi_platform_data {
> +       u32 version;    /* Use this entry for panels with */
> +                               /* (major << 8 | minor) version or above. */
> +                               /* If non-zero another array entry follows */
> +       int (*power)(int on);   /* Only valid in first array entry */
> +       u32 flags;
> +       u32 inactive_left; /* 0x10000 = screen width */
> +       u32 inactive_right; /* 0x10000 = screen width */
> +       u32 inactive_top; /* 0x10000 = screen height */
> +       u32 inactive_bottom; /* 0x10000 = screen height */
> +       u32 snap_left_on; /* 0x10000 = screen width */
> +       u32 snap_left_off; /* 0x10000 = screen width */
> +       u32 snap_right_on; /* 0x10000 = screen width */
> +       u32 snap_right_off; /* 0x10000 = screen width */
> +       u32 snap_top_on; /* 0x10000 = screen height */
> +       u32 snap_top_off; /* 0x10000 = screen height */
> +       u32 snap_bottom_on; /* 0x10000 = screen height */
> +       u32 snap_bottom_off; /* 0x10000 = screen height */
> +       u32 fuzz_x; /* 0x10000 = screen width */
> +       u32 fuzz_y; /* 0x10000 = screen height */
> +       int fuzz_p;
> +       int fuzz_w;
> +};
> +
> +#endif /* _LINUX_SYNAPTICS_I2C_RMI_H */
>


-- 
---Trilok Soni
http://triloksoni.wordpress.com
http://www.linkedin.com/in/triloksoni
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux