Hi Jiri, > > Sorry, I posted a parsed version of the report descriptor previously > > though I failed to cross post: > > > > Collection page=Generic_Desktop usage=Mouse > > Input id=2 size=1 count=1 page=Button usage=Button_1 Variable, logical range 0..1 > > Input id=2 size=1 count=1 page=Button usage=Button_2 Variable, logical range 0..1 > > Input id=2 size=1 count=1 page=Button usage=Button_3 Variable, logical range 0..1 > > Input id=2 size=1 count=1 page=Button usage=Button_4 Variable, logical range 0..1 > > Input id=2 size=4 count=1 page=0x0000 usage=0x0000 Const Variable, logical range 0..1 > > Collection page=Generic_Desktop usage=Pointer > > Input id=2 size=8 count=1 page=Generic_Desktop usage=X Variable Relative, logical range -127..127 > > Input id=2 size=8 count=1 page=Generic_Desktop usage=Y Variable Relative, logical range -127..127 > > Input id=2 size=8 count=1 page=Consumer usage=AC_Pan Variable Relative, logical range -127..127 > > Input id=2 size=8 count=1 page=Generic_Desktop usage=Wheel Variable Relative, logical range -127..127 > > End collection > > Input id=2 size=8 count=1 page=0x00ff usage=0x00c0 Variable, logical range -127..127 > > Feature id=71 size=8 count=1 page=Device_Controls usage=Battery_Strength Variable NoPref Volatile, logical range 0..100 > > End collection > > As you can see, there is a Feature report relating to the Battery > > Strength, but I do not know what to do with that. I suppose that it is > > to be polled in order to return a percentage value.. > > Yes, it has to be polled. But at least the initial value should be > retrieved during the very initialization of the device -- both USB and > Bluetooth implementations this in usbhid_init_reports()/hidp_start() -- > they query INPUT and FEATURE reports during device initialization. since the descriptors are the same, can we not do this inside the HID core with a specific quirk setting. And maybe even a timer that polls it every 30 minutes or so. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
