On Wed, 2009-04-01 at 11:41 +0200, Johannes Berg wrote:
> On Tue, 2009-03-31 at 10:40 +0200, Jiri Kosina wrote:
>
> > > > Could you please send me your config?
> > > Sure, attached. I haven't yet tried to reproduce on .29 though, which
> > > this config is for (but I haven't changed it since, only taken it
> > > forward).
>
> I've now gotten it again on 2.6.29-wl-20327-g8f2487d-dirty.
I guess I should've posted the entire report:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.29-wl-20327-g8f2487d-dirty #71
-------------------------------------------------------
events/0/9 is trying to acquire lock:
(&dev->mutex){--..}, at: [<ffffffff804d19e1>] input_disconnect_device+0x31/0xf0
but task is already holding lock:
(&usbhid->reset_work){--..}, at: [<ffffffff8025d23b>] run_workqueue+0xbb/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&usbhid->reset_work){--..}:
[<ffffffff802771e7>] check_prev_add+0x3b7/0x770
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff8025d287>] run_workqueue+0x107/0x250
[<ffffffff8025d47f>] worker_thread+0xaf/0x130
[<ffffffff80261dae>] kthread+0x4e/0x90
[<ffffffff8020cfba>] child_rip+0xa/0x20
[<ffffffffffffffff>] 0xffffffffffffffff
-> #3 (events){--..}:
[<ffffffff802771e7>] check_prev_add+0x3b7/0x770
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff8025d722>] cleanup_workqueue_thread+0x42/0x90
[<ffffffff805bca8d>] workqueue_cpu_callback+0x9d/0x132
[<ffffffff805d1205>] notifier_call_chain+0x65/0xa0
[<ffffffff80267626>] raw_notifier_call_chain+0x16/0x20
[<ffffffff805ba91b>] _cpu_down+0x1db/0x350
[<ffffffff8024a5b5>] disable_nonboot_cpus+0xe5/0x170
[<ffffffff80287ef5>] hibernation_snapshot+0x135/0x170
[<ffffffff8028b8a5>] snapshot_ioctl+0x425/0x620
[<ffffffff802f27a6>] vfs_ioctl+0x36/0xb0
[<ffffffff802f2b89>] do_vfs_ioctl+0x89/0x350
[<ffffffff802f2e9f>] sys_ioctl+0x4f/0x80
[<ffffffff8020bf0b>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
-> #2 (cpu_add_remove_lock){--..}:
[<ffffffff802771e7>] check_prev_add+0x3b7/0x770
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff805cb56c>] mutex_lock_nested+0xfc/0x390
[<ffffffff8024a447>] cpu_maps_update_begin+0x17/0x20
[<ffffffff8025d7c8>] destroy_workqueue+0x38/0xb0
[<ffffffffa0058115>] input_close_polled_device+0x45/0x60 [input_polldev]
[<ffffffff804d145c>] input_close_device+0x5c/0x90
[<ffffffffa009f1e9>] evdev_release+0xa9/0xd0 [evdev]
[<ffffffff802e4e25>] __fput+0xd5/0x1e0
[<ffffffff802e4f55>] fput+0x25/0x30
[<ffffffff802e14f8>] filp_close+0x58/0x90
[<ffffffff802e15ee>] sys_close+0xbe/0x120
[<ffffffff8020bf0b>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
-> #1 (polldev_mutex){--..}:
[<ffffffff802771e7>] check_prev_add+0x3b7/0x770
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff805cb12c>] mutex_lock_interruptible_nested+0xec/0x430
[<ffffffffa0058151>] input_open_polled_device+0x21/0xd0 [input_polldev]
[<ffffffff804d1528>] input_open_device+0x98/0xc0
[<ffffffffa009f468>] evdev_open+0x1c8/0x1f0 [evdev]
[<ffffffff804d099f>] input_open_file+0x10f/0x200
[<ffffffff802e6e47>] chrdev_open+0x147/0x220
[<ffffffff802e18eb>] __dentry_open+0x11b/0x350
[<ffffffff802e1c37>] nameidata_to_filp+0x57/0x70
[<ffffffff802f0e6e>] do_filp_open+0x1fe/0x970
[<ffffffff802e16d0>] do_sys_open+0x80/0x110
[<ffffffff802e17a0>] sys_open+0x20/0x30
[<ffffffff8020bf0b>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
-> #0 (&dev->mutex){--..}:
[<ffffffff80276e87>] check_prev_add+0x57/0x770
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff805cb56c>] mutex_lock_nested+0xfc/0x390
[<ffffffff804d19e1>] input_disconnect_device+0x31/0xf0
[<ffffffff804d1aba>] input_unregister_device+0x1a/0x110
[<ffffffffa00df329>] bcm5974_disconnect+0x29/0x90 [bcm5974]
[<ffffffffa001c9ed>] usb_unbind_interface+0x6d/0x180 [usbcore]
[<ffffffff80498661>] __device_release_driver+0x81/0xc0
[<ffffffff804987c0>] device_release_driver+0x30/0x50
[<ffffffffa001ce48>] usb_driver_release_interface+0xc8/0xf0 [usbcore]
[<ffffffffa001cf99>] usb_forced_unbind_intf+0x39/0x90 [usbcore]
[<ffffffffa00121a5>] usb_reset_device+0xd5/0x220 [usbcore]
[<ffffffffa00957fa>] hid_reset+0x18a/0x280 [usbhid]
[<ffffffff8025d28d>] run_workqueue+0x10d/0x250
[<ffffffff8025d47f>] worker_thread+0xaf/0x130
[<ffffffff80261dae>] kthread+0x4e/0x90
[<ffffffff8020cfba>] child_rip+0xa/0x20
[<ffffffffffffffff>] 0xffffffffffffffff
other info that might help us debug this:
2 locks held by events/0/9:
#0: (events){--..}, at: [<ffffffff8025d23b>] run_workqueue+0xbb/0x250
#1: (&usbhid->reset_work){--..}, at: [<ffffffff8025d23b>] run_workqueue+0xbb/0x250
stack backtrace:
Pid: 9, comm: events/0 Not tainted 2.6.29-wl-20327-g8f2487d-dirty #71
Call Trace:
[<ffffffff80276930>] print_circular_bug_tail+0xe0/0xf0
[<ffffffff80276e87>] check_prev_add+0x57/0x770
[<ffffffff802191bf>] ? save_stack_trace+0x2f/0x50
[<ffffffff80277b96>] validate_chain+0x5f6/0x6b0
[<ffffffff8027808f>] __lock_acquire+0x43f/0xa10
[<ffffffff802780ad>] ? __lock_acquire+0x45d/0xa10
[<ffffffff802786f1>] lock_acquire+0x91/0xc0
[<ffffffff804d19e1>] ? input_disconnect_device+0x31/0xf0
[<ffffffff805cb56c>] mutex_lock_nested+0xfc/0x390
[<ffffffff804d19e1>] ? input_disconnect_device+0x31/0xf0
[<ffffffff804d19e1>] ? input_disconnect_device+0x31/0xf0
[<ffffffff804d19e1>] input_disconnect_device+0x31/0xf0
[<ffffffff804d1aba>] input_unregister_device+0x1a/0x110
[<ffffffffa00df329>] bcm5974_disconnect+0x29/0x90 [bcm5974]
[<ffffffffa001c9ed>] usb_unbind_interface+0x6d/0x180 [usbcore]
[<ffffffff80498661>] __device_release_driver+0x81/0xc0
[<ffffffff804987c0>] device_release_driver+0x30/0x50
[<ffffffffa001ce48>] usb_driver_release_interface+0xc8/0xf0 [usbcore]
[<ffffffffa001cf99>] usb_forced_unbind_intf+0x39/0x90 [usbcore]
[<ffffffffa00121a5>] usb_reset_device+0xd5/0x220 [usbcore]
[<ffffffffa00957fa>] hid_reset+0x18a/0x280 [usbhid]
[<ffffffffa0095670>] ? hid_reset+0x0/0x280 [usbhid]
[<ffffffff8025d28d>] run_workqueue+0x10d/0x250
[<ffffffff8025d23b>] ? run_workqueue+0xbb/0x250
[<ffffffff8025d47f>] worker_thread+0xaf/0x130
[<ffffffff80262280>] ? autoremove_wake_function+0x0/0x40
[<ffffffff8025d3d0>] ? worker_thread+0x0/0x130
[<ffffffff80261dae>] kthread+0x4e/0x90
[<ffffffff8020cfba>] child_rip+0xa/0x20
johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
