Hi, I have a box here which has a couple of USB devices connected. That includes several HID devices (keyboards, mouse) and a couple of others including a USB powerswitch driven through a user space program. Now what happened is that I changed some of the HID devices around (moving from a direct port to a hub) and also moved the USB power switch from one port to another. But after that the power switch didn't work anymore, just giving a flood of usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 (sispm is the user space driver) Kernel is 2.6.28-rc3 Relevant messages from the kernel log (relatively long because there is a longer history): ... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8304400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ... usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ... usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2 generic-usb 0003:045E:0039.0001: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0 usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... input: Silitek Standard USB Keyboard as /class/input/input3 generic-usb 0003:047B:0011.0002: input: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.0-2/input0 usb 3-1: new low speed USB device using uhci_hcd and address 2 /home/lsrc/linux-2.6.28-rc3/drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint ... usb 1-5: new high speed USB device using ehci_hcd and address 5 usb 1-5: configuration #1 chosen from 1 choice usb-storage: probe of 1-5:1.0 failed with error -5 usb-storage: probe of 1-5:1.1 failed with error -5 usb-storage: probe of 1-5:1.2 failed with error -1 usb-storage: probe of 1-5:1.3 failed with error -1 usbcore: registered new interface driver usbserial USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core USB Serial support registered for GSM modem (1-port) option 1-5:1.0: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0 option 1-5:1.1: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1 usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems ... usb 1-5: USB disconnect, address 5 option 1-5:1.0: device disconnected option 1-5:1.1: device disconnected option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: configuration #1 chosen from 1 choice usb-storage: probe of 1-5:1.0 failed with error -1 usb 1-5: USB disconnect, address 6 usb 1-5: new high speed USB device using ehci_hcd and address 7 usb 1-5: configuration #1 chosen from 1 choice usb-storage: probe of 1-5:1.0 failed with error -5 option 1-5:1.0: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0 usb-storage: probe of 1-5:1.1 failed with error -5 option 1-5:1.1: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1 usb-storage: probe of 1-5:1.2 failed with error -1 usb-storage: probe of 1-5:1.3 failed with error -1 PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered usb 1-4: new high speed USB device using ehci_hcd and address 8 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usb 2-1: USB disconnect, address 2 usb 1-4: reset high speed USB device using ehci_hcd and address 8 usb 1-4.2: new low speed USB device using ehci_hcd and address 9 usb 1-4.2: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input4 generic-usb 0003:045E:0039.0004: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-4.2/input0 usb 2-2: USB disconnect, address 3 usb 1-4.3: new low speed USB device using ehci_hcd and address 10 usb 1-4.3: configuration #1 chosen from 1 choice input: Silitek Standard USB Keyboard as /class/input/input5 generic-usb 0003:047B:0011.0005: input: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.7-4.3/input0 usb 1-4.1: new full speed USB device using ehci_hcd and address 11 usb 1-4.1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 11 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17 usbcore: registered new interface driver usblp usb 1-6: new high speed USB device using ehci_hcd and address 12 usb 1-6: configuration #1 chosen from 1 choice scsi16 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 12 usb-storage: waiting for device to settle before scanning scsi 16:0:0:0: Direct-Access CBM Flash Disk 4.00 PQ: 0 ANSI: 2 sd 16:0:0:0: [sdc] 255231 512-byte hardware sectors: (130 MB/124 MiB) sd 16:0:0:0: [sdc] Write Protect is off sd 16:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 16:0:0:0: [sdc] Assuming drive cache: write through sd 16:0:0:0: [sdc] 255231 512-byte hardware sectors: (130 MB/124 MiB) sd 16:0:0:0: [sdc] Write Protect is off sd 16:0:0:0: [sdc] Mode Sense: 00 00 00 00 sd 16:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sd 16:0:0:0: [sdc] Attached SCSI removable disk sd 16:0:0:0: Attached scsi generic sg3 type 0 usb-storage: device scan complete usb 1-6: USB disconnect, address 12 usb 1-5: USB disconnect, address 7 option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 option 1-5:1.0: device disconnected option 1-5:1.1: device disconnected option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 usb 1-5: new high speed USB device using ehci_hcd and address 13 usb 1-5: configuration #1 chosen from 1 choice usb-storage: probe of 1-5:1.0 failed with error -1 usb 1-5: USB disconnect, address 13 usb 1-5: new high speed USB device using ehci_hcd and address 14 usb 1-5: configuration #1 chosen from 1 choice usb-storage: probe of 1-5:1.0 failed with error -5 option 1-5:1.0: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB0 usb-storage: probe of 1-5:1.1 failed with error -5 option 1-5:1.1: GSM modem (1-port) converter detected usb 1-5: GSM modem (1-port) converter now attached to ttyUSB1 usb-storage: probe of 1-5:1.2 failed with error -1 usb-storage: probe of 1-5:1.3 failed with error -1 usb 1-4.1: USB disconnect, address 11 usblp0: removed usb 1-4.1: new full speed USB device using ehci_hcd and address 15 usb 1-4.1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 15 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 3-1: USB disconnect, address 2 usb 1-4: USB disconnect, address 8 usb 1-4.1: USB disconnect, address 15 usblp0: removed usb 1-4.2: USB disconnect, address 9 usb 1-4.3: USB disconnect, address 10 usb 2-2: new low speed USB device using uhci_hcd and address 4 usb 2-2: configuration #1 chosen from 1 choice /home/lsrc/linux-2.6.28-rc3/drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint usb 1-4: new high speed USB device using ehci_hcd and address 17 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usb 1-4.1: new full speed USB device using ehci_hcd and address 18 usb 1-4.1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 18 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17 usb 1-4.2: new low speed USB device using ehci_hcd and address 19 usb 1-4.2: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input6 generic-usb 0003:045E:0039.0007: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-4.2/input0 usb 1-4.3: new low speed USB device using ehci_hcd and address 20 usb 1-4.3: configuration #1 chosen from 1 choice input: Silitek Standard USB Keyboard as /class/input/input7 generic-usb 0003:047B:0011.0008: input: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.7-4.3/input0 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 1-4: USB disconnect, address 17 usb 1-4.1: USB disconnect, address 18 usblp0: removed usb 1-4.2: USB disconnect, address 19 usb 1-4.3: USB disconnect, address 20 usb 1-4: new high speed USB device using ehci_hcd and address 21 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected usb 1-4.1: new full speed USB device using ehci_hcd and address 22 usb 1-4.1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 22 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17 usb 1-4.2: new low speed USB device using ehci_hcd and address 23 usb 1-4.2: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input8 generic-usb 0003:045E:0039.0009: input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.7-4.2/input0 usb 1-4.3: new low speed USB device using ehci_hcd and address 24 usb 1-4.3: configuration #1 chosen from 1 choice input: Silitek Standard USB Keyboard as /class/input/input9 generic-usb 0003:047B:0011.000A: input: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.7-4.3/input0 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 hub 1-4:1.0: port 1 disabled by hub (EMI?), re-enabling... usb 1-4.1: USB disconnect, address 22 usblp0: removed usb 1-4.1: new full speed USB device using ehci_hcd and address 25 usb 1-4.1: configuration #1 chosen from 1 choice usblp0: USB Bidirectional printer dev 25 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0C17 usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice input: CHESEN USB Keyboard as /class/input/input10 generic-usb 0003:0A81:0103.000B: input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.2-2/input0 input: CHESEN USB Keyboard as /class/input/input11 generic-usb 0003:0A81:0103.000C: input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:1d.2-2/input1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: USB disconnect, address 4 usb 2-2: new low speed USB device using uhci_hcd and address 5 usb 2-2: configuration #1 chosen from 1 choice /home/lsrc/linux-2.6.28-rc3/drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 usb 2-2: usbfs: interface 0 claimed by usbhid while 'sispm' sets config #1 ... more messages like this .... -Andi -- ak@xxxxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
