The gpio setup for AM200 specific GPIO pins should be done in the AM200
code rather than in generic gumstix code.
Signed-off-by: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
---
arch/arm/mach-pxa/am200epd.c | 15 +++++++++++++++
arch/arm/mach-pxa/gumstix.c | 7 -------
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index b965085..3a4f8d8 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,12 @@
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <mach/gumstix.h>
+#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
+#include "generic.h"
+
#include <video/metronomefb.h>
static unsigned int panel_type = 6;
@@ -331,6 +335,15 @@ static struct metronome_board am200_board = {
.cleanup = am200_cleanup,
};
+static unsigned long am200_pin_config[] __initdata = {
+ GPIO51_GPIO,
+ GPIO49_GPIO,
+ GPIO48_GPIO,
+ GPIO32_GPIO,
+ GPIO17_GPIO,
+ GPIO16_GPIO,
+};
+
static int __init am200_init(void)
{
int ret;
@@ -339,6 +352,8 @@ static int __init am200_init(void)
* creation events */
fb_register_client(&am200_fb_notif);
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(am200_pin_config));
+
/* request our platform independent driver */
request_module("metronomefb");
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index d8962a0..06bc667 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -184,13 +184,6 @@ static unsigned long gumstix_pin_config[] __initdata = {
GPIO6_MMC_CLK,
GPIO53_MMC_CLK,
GPIO8_MMC_CS0,
- /* these are used by AM200EPD */
- GPIO51_GPIO,
- GPIO49_GPIO,
- GPIO48_GPIO,
- GPIO32_GPIO,
- GPIO17_GPIO,
- GPIO16_GPIO,
};
static void __init gumstix_init(void)
--
1.5.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
