the use of is_blah() suggests a 1 or 0 return. This assumption is made in
pxa25x_udc code such as:
dev->vbus = is_vbus_present();
where dev->vbus is a bitfield. This fix allows pxa25x_udc_probe to correctly
detect vbus. Other changes were to make its use consistent in the rest of
the code.
Signed-off-by: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
---
drivers/usb/gadget/pxa25x_udc.c | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index da6e93c..2dbc0db 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -141,7 +141,11 @@ static int is_vbus_present(void)
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
@@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
@@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev)
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
--
1.5.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
