hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.
Signed-off-by: Jiri Slaby <jirislaby@xxxxxxxxx>
---
drivers/hid/usbhid/Kconfig | 13 --------
drivers/hid/usbhid/Makefile | 3 --
drivers/hid/usbhid/hid-core.c | 2 +-
drivers/hid/usbhid/hid-ff.c | 69 -----------------------------------------
include/linux/hid.h | 9 +-----
5 files changed, 2 insertions(+), 94 deletions(-)
delete mode 100644 drivers/hid/usbhid/hid-ff.c
diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 3cfc076..5d9aa95 100644
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -24,21 +24,8 @@ config USB_HID
comment "Input core support is needed for USB HID input layer or HIDBP support"
depends on USB_HID && INPUT=n
-config HID_FF
- bool "Force feedback support (EXPERIMENTAL)"
- depends on USB_HID && EXPERIMENTAL
- help
- Say Y here is you want force feedback support for a few HID devices.
- See below for a list of supported devices.
-
- See <file:Documentation/input/ff.txt> for a description of the force
- feedback API.
-
- If unsure, say N.
-
config HID_PID
bool "PID device support"
- depends on HID_FF
help
Say Y here if you have a PID-compliant device and wish to enable force
feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
diff --git a/drivers/hid/usbhid/Makefile b/drivers/hid/usbhid/Makefile
index 5c460fc..1329ecb 100644
--- a/drivers/hid/usbhid/Makefile
+++ b/drivers/hid/usbhid/Makefile
@@ -13,9 +13,6 @@ endif
ifeq ($(CONFIG_HID_PID),y)
usbhid-objs += hid-pidff.o
endif
-ifeq ($(CONFIG_HID_FF),y)
- usbhid-objs += hid-ff.o
-endif
obj-$(CONFIG_USB_HID) += usbhid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 5f32e30..d448e4d 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -938,7 +938,7 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
usb_set_intfdata(intf, hid);
hid->ll_driver = &usb_hid_driver;
hid->hid_output_raw_report = usbhid_output_raw_report;
- hid->ff_init = hid_ff_init;
+ hid->ff_init = hid_pidff_init;
#ifdef CONFIG_USB_HIDDEV
hid->hiddev_connect = hiddev_connect;
hid->hiddev_hid_event = hiddev_hid_event;
diff --git a/drivers/hid/usbhid/hid-ff.c b/drivers/hid/usbhid/hid-ff.c
deleted file mode 100644
index eca01a6..0000000
--- a/drivers/hid/usbhid/hid-ff.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Force feedback support for hid devices.
- * Not all hid devices use the same protocol. For example, some use PID,
- * other use their own proprietary procotol.
- *
- * Copyright (c) 2002-2004 Johann Deneux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so by
- * e-mail - mail your message to <johann.deneux@xxxxxxxx>
- */
-
-#include <linux/input.h>
-
-#undef DEBUG
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include "usbhid.h"
-
-/*
- * This table contains pointers to initializers. To add support for new
- * devices, you need to add the USB vendor and product ids here.
- */
-struct hid_ff_initializer {
- u16 idVendor;
- u16 idProduct;
- int (*init)(struct hid_device*);
-};
-
-/*
- * We try pidff when no other driver is found because PID is the
- * standards compliant way of implementing force feedback in HID.
- * pidff_init() will quickly abort if the device doesn't appear to
- * be a PID device
- */
-static struct hid_ff_initializer inits[] = {
- { 0, 0, hid_pidff_init} /* Matches anything */
-};
-
-int hid_ff_init(struct hid_device* hid)
-{
- struct hid_ff_initializer *init;
- int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
- int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
-
- for (init = inits; init->idVendor; init++)
- if (init->idVendor == vendor && init->idProduct == product)
- break;
-
- return init->init(hid);
-}
-EXPORT_SYMBOL_GPL(hid_ff_init);
-
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 6cf0357..eb1844c 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -757,17 +757,10 @@ int usbhid_quirks_init(char **quirks_param);
void usbhid_quirks_exit(void);
void usbhid_set_leds(struct hid_device *hid);
-#ifdef CONFIG_HID_FF
-int hid_ff_init(struct hid_device *hid);
-
#ifdef CONFIG_HID_PID
int hid_pidff_init(struct hid_device *hid);
#else
-static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; }
-#endif
-
-#else
-#define hid_ff_init NULL
+#define hid_pidff_init NULL
#endif
#ifdef CONFIG_HID_DEBUG
--
1.6.0
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
