Re: [PATCH] [V3] powerpc: Xilinx: PS2: Added new XPS PS2 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>>>> "John" == John Linn <john.linn@xxxxxxxxxx> writes:

Hi,

 > Added a new driver for Xilinx XPS PS2 IP. This driver is
 > a flat driver to better match the Linux driver pattern.

 > Signed-off-by: Sadanand <sadanan@xxxxxxxxxx>
 > Signed-off-by: John Linn <john.linn@xxxxxxxxxx>
 > ---
 > V2
 > 	Updated the driver based on feedback from Dmitry, Peter, and Grant.
 > 	We believe Montavista copyright is still valid.
 > V3
 > 	Incorporated Dmitry and Grant's 2nd set of comments which were some
 > 	minor cleanup and removal of the mutex which was not needed.
 
 >  drivers/input/serio/Kconfig      |    5 +
 >  drivers/input/serio/Makefile     |    1 +
 >  drivers/input/serio/xilinx_ps2.c |  384 ++++++++++++++++++++++++++++++++++++++
 >  3 files changed, 390 insertions(+), 0 deletions(-)
 >  create mode 100644 drivers/input/serio/xilinx_ps2.c

 > diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
 > index ec4b661..0e62b39 100644
 > --- a/drivers/input/serio/Kconfig
 > +++ b/drivers/input/serio/Kconfig
 > @@ -190,4 +190,9 @@ config SERIO_RAW
 >  	  To compile this driver as a module, choose M here: the
 >  	  module will be called serio_raw.
 
 > +config SERIO_XILINX_XPS_PS2
 > +	tristate "Xilinx XPS PS/2 Controller Support"
 > +	help
 > +	  This driver supports XPS PS/2 IP from Xilinx EDK.
 > +
 >  endif
 > diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
 > index 38b8868..9b6c813 100644
 > --- a/drivers/input/serio/Makefile
 > +++ b/drivers/input/serio/Makefile
 > @@ -21,3 +21,4 @@ obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
 >  obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
 >  obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 >  obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
 > +obj-$(CONFIG_SERIO_XILINX_XPS_PS2)	+= xilinx_ps2.o
 > diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
 > new file mode 100644
 > index 0000000..e86f11b
 > --- /dev/null
 > +++ b/drivers/input/serio/xilinx_ps2.c
 > @@ -0,0 +1,384 @@
 > +/*
 > + * Xilinx XPS PS/2 device driver
 > + *
 > + * (c) 2005 MontaVista Software, Inc.
 > + * (c) 2008 Xilinx, Inc.
 > + *
 > + * This program is free software; you can redistribute it and/or modify it
 > + * under the terms of the GNU General Public License as published by the
 > + * Free Software Foundation; either version 2 of the License, or (at your
 > + * option) any later version.
 > + *
 > + * You should have received a copy of the GNU General Public License along
 > + * with this program; if not, write to the Free Software Foundation, Inc.,
 > + * 675 Mass Ave, Cambridge, MA 02139, USA.
 > + */
 > +
 > +
 > +#include <linux/module.h>
 > +#include <linux/serio.h>
 > +#include <linux/interrupt.h>
 > +#include <linux/errno.h>
 > +#include <linux/init.h>
 > +#include <linux/list.h>
 > +#include <linux/io.h>
 > +
 > +#include <linux/of_device.h>
 > +#include <linux/of_platform.h>
 > +
 > +#define DRIVER_NAME		"xilinx_ps2"
 > +

Is there an online datasheet available somewhere on xilinx.com? (I
couldn't find any right away) - If so, please add a link here.

 > +/* Register offsets for the xps2 device */
 > +#define XPS2_SRST_OFFSET	0x00000000 /* Software Reset register */
 > +#define XPS2_STATUS_OFFSET	0x00000004 /* Status register */
 > +#define XPS2_RX_DATA_OFFSET	0x00000008 /* Receive Data register */
 > +#define XPS2_TX_DATA_OFFSET	0x0000000C /* Transmit Data register */
 > +#define XPS2_GIER_OFFSET	0x0000002C /* Global Interrupt Enable reg */
 > +#define XPS2_IPISR_OFFSET	0x00000030 /* Interrupt Status register */
 > +#define XPS2_IPIER_OFFSET	0x00000038 /* Interrupt Enable register */
 > +
 > +/* Reset Register Bit Definitions */
 > +#define XPS2_SRST_RESET		0x0000000A /* Software Reset  */
 > +
 > +/* Status Register Bit Positions */
 > +#define XPS2_STATUS_RX_FULL	0x00000001 /* Receive Full  */
 > +#define XPS2_STATUS_TX_FULL	0x00000002 /* Transmit Full  */
 > +
 > +/* Bit definitions for ISR/IER registers. Both the registers have the same bit
 > + * definitions and are only defined once. */
 > +#define XPS2_IPIXR_WDT_TOUT	0x00000001 /* Watchdog Timeout Interrupt */
 > +#define XPS2_IPIXR_TX_NOACK	0x00000002 /* Transmit No ACK Interrupt */
 > +#define XPS2_IPIXR_TX_ACK	0x00000004 /* Transmit ACK (Data) Interrupt */
 > +#define XPS2_IPIXR_RX_OVF	0x00000008 /* Receive Overflow Interrupt */
 > +#define XPS2_IPIXR_RX_ERR	0x00000010 /* Receive Error Interrupt */
 > +#define XPS2_IPIXR_RX_FULL	0x00000020 /* Receive Data Interrupt */
 > +
 > +/* Mask for all the Transmit Interrupts */
 > +#define XPS2_IPIXR_TX_ALL	(XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
 > +
 > +/* Mask for all the Receive Interrupts */
 > +#define XPS2_IPIXR_RX_ALL	(XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR |  \
 > +					XPS2_IPIXR_RX_FULL)
 > +
 > +/* Mask for all the Interrupts */
 > +#define XPS2_IPIXR_ALL		(XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL |  \
 > +					XPS2_IPIXR_WDT_TOUT)
 > +
 > +/* Global Interrupt Enable mask */
 > +#define XPS2_GIER_GIE_MASK	0x80000000
 > +
 > +struct xps2data {
 > +	int irq;
 > +	u32 phys_addr;
 > +	u32 remap_size;

Do you need to keep track of these? Couldn't you just do an
of_address_to_resource in the remove to get them?  I guess they should
be resource_size_t instead of u32s as well.


 > +	spinlock_t lock;
 > +	u8 rxb;				/* Rx buffer */

Why do you need this? It seems like you don't need to keep this value
between interrupts.

 > +	void __iomem *base_address;	/* virt. address of control registers */
 > +	unsigned int dfl;

flags is maybe a better name. Do you need to keep track of it between
interrupts?

 > +	struct serio serio;		/* serio */
 > +};
 > +
 > +/************************************/
 > +/* XPS PS/2 data transmission calls */
 > +/************************************/
 > +
 > +/*
 > + * xps2_recv() will attempt to receive a byte of data from the PS/2 port.
 > + */
 > +static int xps2_recv(struct xps2data *drvdata, u8 *byte)
 > +{
 > +	u32 sr;
 > +	int status = -1;
 > +
 > +	/* If there is data available in the PS/2 receiver, read it */
 > +	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
 > +	if (sr & XPS2_STATUS_RX_FULL) {
 > +		*byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
 > +		status = 0;
 > +	}
 > +
 > +	return status;
 > +}
 > +
 > +/*********************/
 > +/* Interrupt handler */
 > +/*********************/
 > +static irqreturn_t xps2_interrupt(int irq, void *dev_id)
 > +{
 > +	struct xps2data *drvdata = (struct xps2data *)dev_id;

The cast isn't needed.

 > +	u32 intr_sr;
 > +	u8 c;
 > +	int status;
 > +
 > +	/* Get the PS/2 interrupts and clear them */
 > +	intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
 > +	out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
 > +
 > +	/* Check which interrupt is active */
 > +	if (intr_sr & XPS2_IPIXR_RX_OVF) {
 > +		printk(KERN_ERR "%s: receive overrun error\n",
 > +			drvdata->serio.name);
 > +	}
 > +
 > +	if (intr_sr & XPS2_IPIXR_RX_ERR)
 > +		drvdata->dfl |= SERIO_PARITY;
 > +
 > +	if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
 > +		drvdata->dfl |= SERIO_TIMEOUT;
 > +
 > +	if (intr_sr & XPS2_IPIXR_RX_FULL) {
 > +		status = xps2_recv(drvdata, &drvdata->rxb);
 > +
 > +		/* Error, if a byte is not received */
 > +		if (status) {
 > +			printk(KERN_ERR
 > +				"%s: wrong rcvd byte count (%d)\n",
 > +				drvdata->serio.name, status);
 > +		} else {
 > +			c = drvdata->rxb;
 > +			serio_interrupt(&drvdata->serio, c, drvdata->dfl);
 > +			drvdata->dfl = 0;
 > +		}
 > +	}
 > +
 > +	if (intr_sr & XPS2_IPIXR_TX_ACK)
 > +		drvdata->dfl = 0;
 > +
 > +	return IRQ_HANDLED;
 > +}
 > +
 > +/*******************/
 > +/* serio callbacks */
 > +/*******************/
 > +
 > +/*
 > + * sxps2_write() sends a byte out through the PS/2 interface.
 > + */
 > +static int sxps2_write(struct serio *pserio, unsigned char c)
 > +{
 > +	struct xps2data *drvdata = pserio->port_data;
 > +	unsigned long flags;
 > +	u32 sr;
 > +	int status = -1;
 > +
 > +	spin_lock_irqsave(&drvdata->lock, flags);
 > +	/* If the PS/2 transmitter is empty send a byte of data */
 > +	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
 > +	if ((sr & XPS2_STATUS_TX_FULL) == 0) {
 > +		out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
 > +		status = 0;
 > +	}
 > +	spin_unlock_irqrestore(&drvdata->lock, flags);
 > +
 > +	return status;
 > +}
 > +
 > +/*
 > + * sxps2_open() is called when a port is open by the higher layer.

s/open/opened/

 > + */
 > +static int sxps2_open(struct serio *pserio)
 > +{
 > +	struct xps2data *drvdata = pserio->port_data;
 > +	int retval;
 > +
 > +	retval = request_irq(drvdata->irq, &xps2_interrupt, 0,
 > +				DRIVER_NAME, drvdata);
 > +	if (retval) {
 > +		printk(KERN_ERR
 > +			"%s: Couldn't allocate interrupt %d\n",
 > +			drvdata->serio.name, drvdata->irq);

please use dev_err here and elsewhere.

 > +		return retval;
 > +	}
 > +
 > +	/* start reception by enabling the interrupts */
 > +	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
 > +	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
 > +	(void)xps2_recv(drvdata, &drvdata->rxb);
 > +
 > +	return 0;		/* success */
 > +}
 > +
 > +/*
 > + * sxps2_close() frees the interrupt.
 > + */
 > +static void sxps2_close(struct serio *pserio)
 > +{
 > +	struct xps2data *drvdata = pserio->port_data;
 > +
 > +	/* Disable the PS2 interrupts */
 > +	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
 > +	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
 > +	free_irq(drvdata->irq, drvdata);
 > +}
 > +
 > +/*********************/
 > +/* Device setup code */
 > +/*********************/
 > +
 > +static int xps2_setup(struct device *dev, struct resource *regs_res,
 > +		      struct resource *irq_res)
 > +{

Why not just merge this with the of_ code now that you only have a
single user of it?

 > +	struct xps2data *drvdata;
 > +	struct serio *serio;
 > +	unsigned long remap_size;
 > +	int retval;
 > +
 > +	if (!dev)
 > +		return -EINVAL;
 > +
 > +	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
 > +	if (!drvdata) {
 > +		dev_err(dev, "Couldn't allocate device private record\n");
 > +		return -ENOMEM;
 > +	}
 > +	spin_lock_init(&drvdata->lock);
 > +	dev_set_drvdata(dev, drvdata);
 > +
 > +	if (!regs_res || !irq_res) {
 > +		dev_err(dev, "IO resource(s) not found\n");
 > +		retval = -EFAULT;
 > +		goto failed1;
 > +	}
 > +
 > +	drvdata->irq = irq_res->start;
 > +	remap_size = regs_res->end - regs_res->start + 1;
 > +	if (!request_mem_region(regs_res->start, remap_size, DRIVER_NAME)) {
 > +
 > +		dev_err(dev, "Couldn't lock memory region at 0x%08X\n",
 > +			(unsigned int)regs_res->start);
 > +		retval = -EBUSY;
 > +		goto failed1;
 > +	}
 > +
 > +	/* Fill in configuration data and add them to the list */
 > +	drvdata->phys_addr = regs_res->start;
 > +	drvdata->remap_size = remap_size;
 > +	drvdata->base_address = ioremap(regs_res->start, remap_size);
 > +	if (drvdata->base_address == NULL) {
 > +
 > +		dev_err(dev, "Couldn't ioremap memory at 0x%08X\n",
 > +			(unsigned int)regs_res->start);
 > +		retval = -EFAULT;
 > +		goto failed2;
 > +	}
 > +
 > +	/* Disable all the interrupts, just in case */
 > +	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
 > +
 > +	/* Reset the PS2 device and abort any current transaction, to make sure
 > +	 * we have the PS2 in a good state */
 > +	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
 > +
 > +	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
 > +		drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
 > +
 > +	serio = &drvdata->serio;
 > +	serio->id.type = SERIO_8042;
 > +	serio->write = sxps2_write;
 > +	serio->open = sxps2_open;
 > +	serio->close = sxps2_close;
 > +	serio->port_data = drvdata;
 > +	serio->dev.parent = dev;
 > +	snprintf(drvdata->serio.name, sizeof(serio->name),
 > +		 "Xilinx XPS PS/2 at %08X", drvdata->phys_addr);
 > +	snprintf(drvdata->serio.phys, sizeof(serio->phys),
 > +		 "xilinxps2/serio at %08X", drvdata->phys_addr);
 > +	serio_register_port(serio);
 > +
 > +	return 0;		/* success */
 > +
 > +failed2:
 > +	release_mem_region(regs_res->start, remap_size);
 > +
 > +failed1:
 > +	kfree(drvdata);
 > +	dev_set_drvdata(dev, NULL);
 > +
 > +	return retval;
 > +}
 > +
 > +/***************************/
 > +/* OF Platform Bus Support */
 > +/***************************/
 > +
 > +static int __devinit xps2_of_probe(struct of_device *ofdev, const struct
 > +				   of_device_id * match)
 > +{
 > +	struct resource r_irq; /* Interrupt resources */
 > +	struct resource r_mem; /* IO mem resources */
 > +	int rc = 0;
 > +
 > +	printk(KERN_INFO "Device Tree Probing \'%s\'\n",
 > +			ofdev->node->name);
 > +
 > +	/* Get iospace for the device */
 > +	rc = of_address_to_resource(ofdev->node, 0, &r_mem);
 > +	if (rc) {
 > +		dev_err(&ofdev->dev, "invalid address\n");
 > +		return rc;
 > +	}
 > +
 > +	/* Get IRQ for the device */
 > +	rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
 > +	if (rc == NO_IRQ) {
 > +		dev_err(&ofdev->dev, "no IRQ found\n");
 > +		return rc;
 > +	}
 > +
 > +	return xps2_setup(&ofdev->dev, &r_mem, &r_irq);
 > +}
 > +
 > +static int __devexit xps2_of_remove(struct of_device *of_dev)
 > +{
 > +	struct xps2data *drvdata;
 > +	struct device *dev;
 > +
 > +	dev = &of_dev->dev;
 > +	if (!dev)
 > +		return -EINVAL;
 > +
 > +	drvdata = (struct xps2data *)dev_get_drvdata(dev);
 > +
 > +	serio_unregister_port(&drvdata->serio);
 > +
 > +	iounmap(drvdata->base_address);
 > +
 > +	release_mem_region(drvdata->phys_addr, drvdata->remap_size);
 > +
 > +	kfree(drvdata);
 > +	dev_set_drvdata(dev, NULL);
 > +
 > +	return 0;		/* success */
 > +}
 > +
 > +/* Match table for of_platform binding */
 > +static struct of_device_id xps2_of_match[] __devinitdata = {
 > +	{ .compatible = "xlnx,xps-ps2-1.00.a", },
 > +	{ /* end of list */ },
 > +};
 > +MODULE_DEVICE_TABLE(of, xps2_of_match);
 > +
 > +static struct of_platform_driver xps2_of_driver = {
 > +	.name		= DRIVER_NAME,
 > +	.match_table	= xps2_of_match,
 > +	.probe		= xps2_of_probe,
 > +	.remove		= __devexit_p(xps2_of_remove),
 > +};
 > +
 > +static int __init xps2_init(void)
 > +{
 > +	return of_register_platform_driver(&xps2_of_driver);
 > +}
 > +
 > +static void __exit xps2_cleanup(void)
 > +{
 > +	of_unregister_platform_driver(&xps2_of_driver);
 > +}
 > +
 > +module_init(xps2_init);
 > +module_exit(xps2_cleanup);
 > +
 > +MODULE_AUTHOR("Xilinx, Inc.");
 > +MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
 > +MODULE_LICENSE("GPL");
 > +
 > -- 
 > 1.5.2.1

-- 
Bye, Peter Korsgaard
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux