From: Pau Oliva Fora <pau@xxxxxxxxxx>
The patch below adds support for HTC Shift UMPC touchscreen.
Signed-off-by: Pau Oliva Fora <pau@xxxxxxxxxx>
---
Patch against linux-2.6.25.4, should apply clean on other versions too.
Thanks to Sam Ravnborg and Pekka Enberg for their comments, my reply below:
Sam Ravnborg wrote:
> The use of the four ports would be nice to be documented
done, changed the DEFINE names
>> + outb_p(3, HTCPEN_PORT2);
> What is the semantic of 3 here.
> Add a comment or a DEFINE
added DEFINES for those
> These calculations needs spaces and comments.
Done, hope is ok now.
> I would asusme you are missing a: input_unregister_device(htcpen_dev);?
no, device is not yet registered here.
Pekka Enberg wrote:
>> +struct input_dev *htcpen_dev;
>
> Why are you not using isa_register_driver() instead?
I have no specifications from the manufacturer, so don't know how to
properly prove the device, etc.
>> + printk(KERN_INFO "htcpen: module inserted\n");
>> +
>> + inb_p(HTCPEN_PORT0);
>
> So there's no way to probe the existence of this device?
I can add a minimal sanity check if that is a must, but I don't have
a datasheet and contacting HTC did not help.
>> + if (request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen", NULL)) {
>
> This is leaking htcpen_dev here. Look at some other drivers for
> examples how to use gotos for this kind of error handling.
Thanks, should be fixed now.
diff -uprN linux-2.6.25.4/drivers/input/touchscreen/htcpen.c linux/drivers/input/touchscreen/htcpen.c
--- linux-2.6.25.4/drivers/input/touchscreen/htcpen.c 1970-01-01 01:00:00.000000000 +0100
+++ linux/drivers/input/touchscreen/htcpen.c 2008-05-17 17:38:35.000000000 +0200
@@ -0,0 +1,155 @@
+/*
+ * HTC Shift touchscreen driver
+ *
+ * Copyright (C) 2008 Pau Oliva Fora <pof@xxxxxxxxxx>
+ *
+ * Thanks to:
+ * Heikki Linnakangas - Penmount LPC touchscreen driver
+ * Wacom / Ping Cheng - Help on linuxwacom-devel
+ * Esteve Espuna - Ideas, tips, moral support :)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#define DRIVER_VERSION "v0.5"
+#define DRIVER_DESC "HTC Shift touchscreen driver"
+
+MODULE_AUTHOR("Pau Oliva Fora <pau@xxxxxxxxxx>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define HTCPEN_PORT_IRQ_CLEAR 0x068
+#define HTCPEN_PORT_INIT 0x06c
+#define HTCPEN_PORT_INDEX 0x0250
+#define HTCPEN_PORT_DATA 0x0251
+#define HTCPEN_IRQ 3
+
+#define X_INDEX 3
+#define Y_INDEX 5
+#define LSB_XY_INDEX 0xc
+#define X_AXIS_MAX 2040
+#define Y_AXIS_MAX 2040
+#define DEVICE_ENABLE 0xa2
+
+static int inverse_y;
+module_param(inverse_y, bool, 0644);
+MODULE_PARM_DESC(inverse_y, "If set Y axis is inversed.");
+
+struct input_dev *htcpen_dev;
+
+static void poll_htcpen(void)
+{
+ unsigned short x, y, xy;
+ unsigned short touch;
+
+ /* 0=press ; 1=release */
+ outb_p(0xb, HTCPEN_PORT_INDEX);
+ touch = inb_p(HTCPEN_PORT_DATA);
+ if (touch)
+ touch = 0;
+ else
+ touch = 1;
+
+ input_report_key(htcpen_dev, BTN_TOUCH, touch);
+
+ /* only update X/Y when screen is being touched */
+ if (touch) {
+ outb_p(X_INDEX, HTCPEN_PORT_INDEX);
+ x = inb_p(HTCPEN_PORT_DATA);
+
+ outb_p(Y_INDEX, HTCPEN_PORT_INDEX);
+ y = inb_p(HTCPEN_PORT_DATA);
+
+ outb_p(LSB_XY_INDEX, HTCPEN_PORT_INDEX);
+ xy = inb_p(HTCPEN_PORT_DATA);
+
+ /* get high resolution value of X and Y using LSB */
+ x = X_AXIS_MAX - ((x * 8) + ((xy >> 4) & 0xf));
+ y = (y * 8) + (xy & 0xf);
+ if (inverse_y)
+ y = Y_AXIS_MAX - y;
+
+ input_report_abs(htcpen_dev, ABS_X, x);
+ input_report_abs(htcpen_dev, ABS_Y, y);
+ }
+
+ input_sync(htcpen_dev);
+
+ inb_p(HTCPEN_PORT_IRQ_CLEAR);
+}
+
+static irqreturn_t htcpen_interrupt(int irq, void *handle)
+{
+ poll_htcpen();
+ return IRQ_HANDLED;
+}
+
+static int __init htcpen_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "htcpen: module inserted\n");
+
+ inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+ htcpen_dev = input_allocate_device();
+ if (!htcpen_dev) {
+ printk(KERN_ERR "htcpen: can't allocate device\n");
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ htcpen_dev->name = "HTC Pen TouchScreen";
+ htcpen_dev->id.bustype = BUS_ISA;
+ htcpen_dev->id.vendor = 0;
+ htcpen_dev->id.product = 0;
+ htcpen_dev->id.version = 0;
+
+ input_set_abs_params(htcpen_dev, ABS_X, 0, X_AXIS_MAX, 0, 0);
+ input_set_abs_params(htcpen_dev, ABS_Y, 0, Y_AXIS_MAX, 0, 0);
+
+ htcpen_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+ htcpen_dev->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
+ htcpen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ err = request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen",
+ htcpen_dev);
+ if (err) {
+ printk(KERN_ERR "htcpen: irq busy\n");
+ err = -EBUSY;
+ goto fail1;
+ }
+
+ err = input_register_device(htcpen_dev);
+ if (err)
+ goto fail2;
+
+ outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+
+ return 0;
+
+ fail2: free_irq(HTCPEN_IRQ, htcpen_dev);
+ fail1: input_free_device(htcpen_dev);
+ return err;
+}
+
+static void __exit htcpen_exit(void)
+{
+ input_unregister_device(htcpen_dev);
+ free_irq(HTCPEN_IRQ, htcpen_dev);
+ printk(KERN_INFO "htcpen: module removed\n");
+}
+
+module_init(htcpen_init);
+module_exit(htcpen_exit);
diff -uprN linux-2.6.25.4/drivers/input/touchscreen/Kconfig linux/drivers/input/touchscreen/Kconfig
--- linux-2.6.25.4/drivers/input/touchscreen/Kconfig 2008-05-15 17:00:12.000000000 +0200
+++ linux/drivers/input/touchscreen/Kconfig 2008-05-17 03:23:14.000000000 +0200
@@ -134,6 +134,17 @@ config TOUCHSCREEN_HP7XX
To compile this driver as a module, choose M here: the
module will be called jornada720_ts.
+config TOUCHSCREEN_HTCPEN
+ tristate "HTC Shift X9500 touchscreen"
+ help
+ Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+ Clio / Shangrila and want to support the built-in touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called htcpen.
+
config TOUCHSCREEN_PENMOUNT
tristate "Penmount serial touchscreen"
select SERIO
diff -uprN linux-2.6.25.4/drivers/input/touchscreen/Makefile linux/drivers/input/touchscreen/Makefile
--- linux-2.6.25.4/drivers/input/touchscreen/Makefile 2008-05-15 17:00:12.000000000 +0200
+++ linux/drivers/input/touchscreen/Makefile 2008-05-17 03:10:12.000000000 +0200
@@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtou
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
+obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
