Re: [PATCH 3/3] wm97xx-core: Support use as a wakeup source

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mark,

On Mon, Apr 14, 2008 at 06:39:35PM +0100, Mark Brown wrote:
> The PENDOWN signal from the WM97xx touch screen controllers can be used
> to generate a wakeup event when the system is suspended. Provide a new
> machine configuration option 'suspend_mode' allowing machine drivers to
> enable this. If no suspend_mode is provided then the touch panel will be
> powered down when the system is suspended.
> 

Hmm, another unique module option... How about using device_can_wakeup()
infrastructure that we already have. I'm adding David Brownell to CC since
I believe he's doing a lot of similar work.

> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/input/touchscreen/wm97xx-core.c |   22 ++++++++++++++++++++++
>  include/linux/wm97xx.h                  |    3 +++
>  2 files changed, 25 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
> index fec07c2..e1a1ca0 100644
> --- a/drivers/input/touchscreen/wm97xx-core.c
> +++ b/drivers/input/touchscreen/wm97xx-core.c
> @@ -689,10 +689,32 @@ static int wm97xx_remove(struct device *dev)
>  static int wm97xx_suspend(struct device *dev, pm_message_t state)
>  {
>  	struct wm97xx *wm = dev_get_drvdata(dev);
> +	u16 reg;
> +	int suspend_mode;
> +
> +	if (wm->mach_ops)
> +		suspend_mode = wm->mach_ops->suspend_mode;
> +	else
> +		suspend_mode = 0;
>  
>  	if (wm->input_dev->users)
>  		cancel_delayed_work_sync(&wm->ts_reader);
>  
> +	/* Power down the digitiser (bypassing the cache for resume) */
> +	reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
> +	reg &= ~WM97XX_PRP_DET_DIG;
> +	if (wm->input_dev->users && suspend_mode)
> +		reg |= suspend_mode;
> +	wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
> +
> +	/* WM9713 has an additional power bit - turn it off if there
> +	 * are no users or if suspend mode is zero. */
> +	if (wm->id == WM9713_ID2 &&
> +	    (!wm->input_dev->users || !suspend_mode)) {
> +		reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
> +		wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
> +	}
> +
>  	return 0;
>  }
>  
> diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
> index ed01c7d..2082833 100644
> --- a/include/linux/wm97xx.h
> +++ b/include/linux/wm97xx.h
> @@ -258,6 +258,9 @@ struct wm97xx_mach_ops {
>  	/* pre and post sample - can be used to minimise any analog noise */
>  	void (*pre_sample) (int);  /* function to run before sampling */
>  	void (*post_sample) (int);  /* function to run after sampling */
> +
> +	/* WM97XX_PRP value to configure while system is suspended */
> +	u16 suspend_mode;
>  };
>  
>  struct wm97xx {
> -- 
> 1.5.5
> 

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux