Compile and install locale definitions using localedef from GNU libc or,
if locale definitions cannot be compiled but are available on the system
as split definitions, just install them.
The resulting locale definitions archive contains at most two different
locale definitions, therefore its size is relatively small.
Add support for localised messages from core packages (LC_MESSAGES).
Add support for non-latin fonts using Unicode (tested successfully with
Greek, Hebrew and Cyrillic).
This revised version fixes several issues in the initial patch (including
the possibility to build locale definitions). Thanks to Andrei Borzenkov
for reviewing the initial patch and providing useful suggestions.
Thanks for Harald Hoyer for the full style review and other useful
suggestions.
Signed-off-by: Guido Trentalancia <guido@xxxxxxxxxxxxxxxx>
---
NEWS | 4 +
dracut-bash-completion.sh | 11 +--
dracut-init.sh | 37 ++++++++++
dracut.8.asc | 8 ++
dracut.conf.5.asc | 14 ++-
dracut.sh | 20 ++++-
modules.d/10i18n/README | 1
modules.d/10i18n/console_init.sh | 58 +++++++++++-----
modules.d/10i18n/module-setup.sh | 123 +++++++++++++++++++++++++++++++++-
modules.d/10i18n/parse-i18n.sh | 8 +-
modules.d/90crypt/module-setup.sh | 6 +
modules.d/91crypt-gpg/module-setup.sh | 6 +
modules.d/99base/init.sh | 4 -
modules.d/99base/module-setup.sh | 4 +
modules.d/99base/profile | 9 ++
15 files changed, 275 insertions(+), 38 deletions(-)
diff -pruN dracut-git-orig/dracut.8.asc dracut-git-10i18n-full-support-for-localisation/dracut.8.asc
--- dracut-git-orig/dracut.8.asc 2016-04-19 02:19:10.650042399 +0200
+++ dracut-git-10i18n-full-support-for-localisation/dracut.8.asc 2016-04-21 17:13:53.043188284 +0200
@@ -358,6 +358,14 @@ provide a valid _/etc/fstab_.
LVM or an encrypted partition.
[NB --device can be used for compatibility with earlier releases]
+**--msg-localisation**::
+ Include full localisation support for the i18n module (slightly increases
+ the initramfs size).
+
+**--no-msg-localisation**::
+ Do not include full localisation support for the i18n module (to save
+ storage space or force the default locale).
+
**-i, --include** _<SOURCE>_ _<TARGET>_::
include the files in the SOURCE directory into the
TARGET directory in the final initramfs. If SOURCE is a file, it will be
diff -pruN dracut-git-orig/dracut-bash-completion.sh dracut-git-10i18n-full-support-for-localisation/dracut-bash-completion.sh
--- dracut-git-orig/dracut-bash-completion.sh 2016-04-19 02:19:10.648042373 +0200
+++ dracut-git-10i18n-full-support-for-localisation/dracut-bash-completion.sh 2016-04-21 17:16:41.148400079 +0200
@@ -28,11 +28,12 @@ _dracut() {
--ro-mnt --force --kernel-only --no-kernel --strip --nostrip
--hardlink --nohardlink --noprefix --mdadmconf --nomdadmconf
--lvmconf --nolvmconf --debug --profile --verbose --quiet
- --local --hostonly --no-hostonly --fstab --help --bzip2 --lzma
- --xz --no-compress --gzip --list-modules --show-modules --keep
- --printsize --regenerate-all --noimageifnotneeded --early-microcode
- --no-early-microcode --print-cmdline --prelink --noprelink --reproducible
- --uefi
+ --local --hostonly --no-hostonly --fstab --msg-localisation
+ --no-msg-localisation --help --bzip2 --lzma --xz --no-compress
+ --gzip --list-modules --show-modules --keep --printsize
+ --regenerate-all --noimageifnotneeded --early-microcode
+ --no-early-microcode --print-cmdline --prelink --noprelink
+ --reproducible --uefi
'
[ARG]='-a -m -o -d -I -k -c -L --kver --add --force-add --add-drivers
diff -pruN dracut-git-orig/dracut.conf.5.asc dracut-git-10i18n-full-support-for-localisation/dracut.conf.5.asc
--- dracut-git-orig/dracut.conf.5.asc 2016-04-19 02:19:10.650042399 +0200
+++ dracut-git-10i18n-full-support-for-localisation/dracut.conf.5.asc 2016-04-21 17:21:57.576555027 +0200
@@ -99,9 +99,6 @@ Configuration files must have the extens
*hostonly_cmdline=*"__{yes|no}__"::
If set, store the kernel command line arguments needed in the initramfs
-*i18n_install_all=*"__{yes|no}__"::
- If set to yes, install all available fonts and keyboard files.
-
*persistent_policy=*"__<policy>__"::
Use _<policy>_ to address disks and partitions.
_<policy>_ can be any directory name found in /dev/disk.
@@ -196,7 +193,16 @@ provide a valid _/etc/fstab_.
Default is "LatArCyrHeb-16".
*i18n_install_all=*"__{yes|no}__"::
- Install everything regardless of generic or hostonly mode.
+ Install all available fonts and keyboard files regardless of generic
+ or hostonly mode.
+
+*msg-localisation=*"__{yes|no}__"::
+ Add full localisation support (includes message-based localisation
+ and non latin font support).
+
+*no-msg-localisation=*"__{yes|no}__"::
+ Do not add full localisation support (only keyboard localisation
+ is added): saves some storage space.
*reproducible=*"__{yes|no}__"::
Create reproducible images.
diff -pruN dracut-git-orig/dracut-init.sh dracut-git-10i18n-full-support-for-localisation/dracut-init.sh
--- dracut-git-orig/dracut-init.sh 2016-04-19 02:19:10.649042386 +0200
+++ dracut-git-10i18n-full-support-for-localisation/dracut-init.sh 2016-04-22 18:05:08.033519479 +0200
@@ -214,6 +214,43 @@ inst_multiple() {
return $_ret
}
+# Install package translations (message-based localisations)
+inst_i18n() {
+ local _locale_dirs_dup
+ local _locale_dirs
+ local _tmppath
+ [[ $1 ]] || return 1 # no package name
+ [ -f /etc/locale.conf ] && . /etc/locale.conf
+ if [ ${LC_ALL} ]; then
+ read LC_ALL_LOCALE LC_ALL_CHARMAP < <(echo ${LC_ALL//./ })
+ fi
+ if [ ${LANG} ]; then
+ read LANG_LOCALE LANG_CHARMAP < <(echo ${LANG//./ })
+ fi
+ if [ ${LC_MESSAGES} ]; then
+ read LC_MESSAGES_LOCALE LC_MESSAGES_CHARMAP < <(echo ${LC_MESSAGES//./ })
+ fi
+ [[ ${LC_ALL_LOCALE} ]] && read LC_ALL_LOCALE_SHORT LC_ALL_LOCALE_COUNTRY < <(echo ${LC_ALL_LOCALE//_/ })
+ [[ ${LANG_LOCALE} ]] && read LANG_LOCALE_SHORT LANG_LOCALE_COUNTRY < <(echo ${LANG_LOCALE//_/ })
+ [[ ${LC_MESSAGES_LOCALE} ]] && read LC_MESSAGES_LOCALE_SHORT LC_MESSAGES_LOCALE_COUNTRY < <(echo ${LC_MESSAGES_LOCALE//_/ })
+ _locale_dirs_dup="${LC_ALL_LOCALE} ${LANG_LOCALE} ${LC_MESSAGES_LOCALE} ${LC_ALL_LOCALE_SHORT} ${LANG_LOCALE_SHORT} ${LC_MESSAGES_LOCALE_SHORT}"
+ _tmppath=
+ _locale_dirs=
+ for dir in ${_locale_dirs_dup}
+ do
+ case $_tmppath in
+ *\ ${dir}) ;;
+ *) _locale_dirs="${_tmppath} ${dir}";;
+ esac
+ _tmppath=${_locale_dirs}
+ done
+ for dir in ${_locale_dirs}; do
+ [[ -d "/usr/share/locale/${dir}" ]] && for file in `find "/usr/share/locale/${dir}" -type f -name "$1.mo"`; do
+ inst_simple "${file}"
+ done
+ done
+}
+
dracut_install() {
inst_multiple "$@"
}
diff -pruN dracut-git-orig/dracut.sh dracut-git-10i18n-full-support-for-localisation/dracut.sh
--- dracut-git-orig/dracut.sh 2016-04-19 02:19:10.652042425 +0200
+++ dracut-git-10i18n-full-support-for-localisation/dracut.sh 2016-04-21 23:06:34.022740183 +0200
@@ -163,6 +163,10 @@ Creates initial ramdisk images for prelo
--mount "[MP]" Same as above, but [DEV], [FSTYPE] and [FSOPTS] are
determined by looking at the current mounts.
--add-device "[DEV]" Bring up [DEV] in initramfs
+ --msg-localisation Add full localisation support rather than only
+ the minimal keyboard support (default)
+ --no-msg-localisation Do not add full localisation support, but only
+ minimal keyboard support
-i, --include [SOURCE] [TARGET]
Include the files in the SOURCE directory into the
Target directory in the final initramfs.
@@ -344,6 +348,8 @@ rearrange_params()
--long no-hostonly-cmdline \
--long persistent-policy: \
--long fstab \
+ --long msg-localisation \
+ --long no-msg-localisation \
--long help \
--long bzip2 \
--long lzma \
@@ -538,6 +544,10 @@ while :; do
--persistent-policy)
persistent_policy_l="$2"; PARMS_TO_STORE+=" '$2'"; shift;;
--fstab) use_fstab_l="yes" ;;
+ --msg-localisation)
+ msg_localisation_l="yes" ;;
+ --no-msg-localisation)
+ msg_localisation_l="no" ;;
-h|--help) long_usage; exit 1 ;;
-i|--include) include_src+=("$2"); PARMS_TO_STORE+=" '$2'";
shift;;
@@ -730,6 +740,8 @@ stdloglvl=$((stdloglvl + verbosity_mod_l
[[ $i18n_install_all_l ]] && i18n_install_all=$i18n_install_all_l
[[ $persistent_policy_l ]] && persistent_policy=$persistent_policy_l
[[ $use_fstab_l ]] && use_fstab=$use_fstab_l
+[[ $msg_localisation_l ]] && msg_localisation=$msg_localisation_l
+[[ $msg_localisation_l ]] || msg_localisation="yes"
[[ $mdadmconf_l ]] && mdadmconf=$mdadmconf_l
[[ $lvmconf_l ]] && lvmconf=$lvmconf_l
[[ $dracutbasedir ]] || dracutbasedir=/usr/lib/dracut
@@ -1269,10 +1281,10 @@ export initdir dracutbasedir \
mods_to_load \
fw_dir drivers_dir debug no_kernel kernel_only \
omit_drivers mdadmconf lvmconf root_dev \
- use_fstab fstab_lines libdirs fscks nofscks ro_mnt \
- stdloglvl sysloglvl fileloglvl kmsgloglvl logfile \
- debug host_fs_types host_devs swap_devs sshkey add_fstab \
- DRACUT_VERSION udevdir prefix filesystems drivers \
+ use_fstab fstab_lines msg_localisation libdirs fscks \
+ nofscks ro_mnt stdloglvl sysloglvl fileloglvl kmsgloglvl \
+ logile debug host_fs_types host_devs swap_devs sshkey \
+ add_fstab DRACUT_VERSION udevdir prefix filesystems drivers \
systemdutildir systemdsystemunitdir systemdsystemconfdir \
hostonly_cmdline loginstall \
tmpfilesdir
diff -pruN dracut-git-orig/modules.d/10i18n/console_init.sh dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/console_init.sh
--- dracut-git-orig/modules.d/10i18n/console_init.sh 2016-04-20 14:11:02.824944921 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/console_init.sh 2016-04-22 17:54:50.913345284 +0200
@@ -6,6 +6,7 @@ if [ -x $systemdutildir/systemd-vconsole
$systemdutildir/systemd-vconsole-setup "$@"
fi
+[ -e /etc/locale.conf ] && . /etc/locale.conf
[ -e /etc/vconsole.conf ] && . /etc/vconsole.conf
DEFAULT_FONT=LatArCyrHeb-16
@@ -19,14 +20,14 @@ set_keyboard() {
}
set_terminal() {
- local dev=$1
-
if [ "${UNICODE}" = 1 ]; then
- printf '\033%%G' >&7
- stty -F ${dev} iutf8
+ if [ "${FONT}" -a ! "${FONT_MAP}" ]; then
+ /usr/bin/unicode_start "${FONT}"
+ elif [ "${FONT}" -a "${FONT_MAP}" ]; then
+ /usr/bin/unicode_start "${FONT}" "${FONT_MAP}"
+ fi
else
- printf '\033%%@' >&7
- stty -F ${dev} -iutf8
+ /usr/bin/unicode_stop
fi
}
@@ -44,16 +45,6 @@ set_keymap() {
loadkeys -q ${utf_switch} ${KEYMAP} ${EXT_KEYMAPS}
}
-set_font() {
- local dev=$1; local trans=''; local uni=''
-
- [ -z "${FONT}" ] && FONT=${DEFAULT_FONT}
- [ -n "${FONT_MAP}" ] && trans="-m ${FONT_MAP}"
- [ -n "${FONT_UNIMAP}" ] && uni="-u ${FONT_UNIMAP}"
-
- setfont ${FONT} -C ${dev} ${trans} ${uni}
-}
-
dev_close() {
exec 6>&-
exec 7>&-
@@ -74,6 +65,27 @@ devname=${dev#/dev/}
exit 1
}
+if [ "${UNICODE}" ]; then
+ if [ "${UNICODE}" = YES -o "${UNICODE}" = yes -o "${UNICODE}" = 1 ]; then
+ UNICODE=1
+ elif [ "${UNICODE}" = NO -o "${UNICODE}" = no -o "${UNICODE}" = 0 ]; then
+ UNICODE=0
+ else
+ UNICODE=''
+ fi
+fi
+if [ ! "${UNICODE}" ]; then
+ IFS=.
+ set -- $LANG
+ tail=$2
+ IFS=-
+ set -- $tail
+ type=$1
+ if [ "${type}" = "UTF" ]; then
+ UNICODE=1
+ fi
+fi
+
dev_open ${dev}
for fd in 6 7; do
@@ -84,9 +96,19 @@ for fd in 6 7; do
fi
done
+# Immediately after booting up, the
+# display driver needs to settle,
+# otherwise the Unicode mode cannot
+# be enabled and the non latin
+# characters do not render properly.
+if [ -d /usr/share/locale ]; then
+ if [ ! -e /tmp/dracut-vga-init-complete ]; then
+ sleep 2 && :> /tmp/dracut-vga-init-complete
+ fi
+fi
+
set_keyboard
-set_terminal ${dev}
-set_font ${dev}
+set_terminal
set_keymap
dev_close
diff -pruN dracut-git-orig/modules.d/10i18n/module-setup.sh dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/module-setup.sh
--- dracut-git-orig/modules.d/10i18n/module-setup.sh 2016-04-22 14:25:26.949983919 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/module-setup.sh 2016-04-23 18:23:14.911103135 +0200
@@ -4,7 +4,11 @@
check() {
[[ "$mount_needs" ]] && return 1
- require_binaries setfont loadkeys kbd_mode || return 1
+ require_binaries setfont loadkeys kbd_mode unicode_start unicode_stop
+
+ if [[ $msg_localisation == "yes" ]]; then
+ require_binaries stty tty tset reset sleep || return 1
+ fi
return 0
}
@@ -27,6 +31,11 @@ install() {
I18N_CONF="/etc/locale.conf"
VCONFIG_CONF="/etc/vconsole.conf"
+ # Core packages: always install the message-based localisation
+ if [[ $msg_localisation == "yes" ]]; then
+ CORE_PACKAGES="libc bash coreutils util-linux e2fsprogs grep sed kbd"
+ fi
+
# This is from 10redhat-i18n.
findkeymap () {
local MAP=$1
@@ -93,7 +102,11 @@ install() {
}
install_base() {
- inst_multiple setfont loadkeys kbd_mode stty
+ inst_multiple setfont loadkeys kbd_mode unicode_start unicode_stop
+
+ if [[ $msg_localisation == "yes" ]]; then
+ inst_multiple stty tty tset reset sleep
+ fi
if ! dracut_module_included "systemd"; then
inst ${moddir}/console_init.sh /lib/udev/console_init
@@ -212,11 +225,115 @@ install() {
inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
fi
+ if [[ $msg_localisation == "yes" ]]; then
+ [[ ${LC_ALL} || ${LANG} || ${LC_MESSAGES} ]] && inst_dir /usr/lib/locale
+
+ # Check if we can compile locale definitions
+ if command -v localedef > /dev/null; then
+ HAS_LOCALEDEF=true
+ else
+ HAS_LOCALEDEF=false
+ fi
+ if [ ${LC_ALL} ]; then
+ read LC_ALL_LOCALE LC_ALL_CHARMAP < <(echo ${LC_ALL//./ })
+ fi
+ if [ ${LANG} ]; then
+ read LANG_LOCALE LANG_CHARMAP < <(echo ${LANG//./ })
+ fi
+ if [ ${LC_MESSAGES} ]; then
+ read LC_MESSAGES_LOCALE LC_MESSAGES_CHARMAP < <(echo ${LC_MESSAGES//./ })
+ fi
+
+ # Generate locale definitions for LC_ALL or install compiled split
+ # definitions where available
+ if [[ ${LC_ALL} && ${LC_ALL_LOCALE} && ${LC_ALL_CHARMAP} ]]; then
+ if [[ ${HAS_LOCALEDEF} == true && -e /usr/share/i18n/locales/${LC_ALL_LOCALE} ]]; then
+ localedef --prefix="${initdir}" -i ${LC_ALL_LOCALE} -f ${LC_ALL_CHARMAP} ${LC_ALL}
+ elif [ -d "/usr/lib/locale/${LC_ALL}" ]; then
+ cp -prfL -t "${initdir}/usr/lib/locale/" /usr/lib/locale/${LC_ALL}
+ fi
+ fi
+
+ # Generate locale definitions for LANG or install compiled split
+ # definitions where available
+ if [[ ${LANG} && ${LANG_LOCALE} && ${LANG_CHARMAP} ]]; then
+ if [[ ${HAS_LOCALEDEF} == true && -e /usr/share/i18n/locales/${LANG_LOCALE} ]]; then
+ localedef --prefix="${initdir}" -i ${LANG_LOCALE} -f ${LANG_CHARMAP} ${LANG}
+ elif [ -d "/usr/lib/locale/${LANG}" ]; then
+ cp -prfL -t "${initdir}/usr/lib/locale/" /usr/lib/locale/${LANG}
+ fi
+ fi
+
+ # Generate locale definitions for LC_MESSAGES of install compiled split
+ # definitions where available
+ if [[ ${LC_MESSAGES} && ${LC_MESSAGES_LOCALE} && ${LC_MESSAGES_CHARMAP} ]]; then
+ if [[ ${HAS_LOCALEDEF} == true && -e /usr/share/i18n/locales/${LC_MESSAGES_LOCALE} ]]; then
+ localedef --prefix="${initdir}" -i ${LC_MESSAGES_LOCALE} -f ${LC_MESSAGES_CHARMAP} ${LC_MESSAGES}
+ elif [ -d "/usr/lib/locale/${LC_MESSAGES}" ]; then
+ cp -prfL -t "${initdir}/usr/lib/locale/" /usr/lib/locale/${LC_MESSAGES}
+ fi
+ fi
+
+ # Install individual localisation files for core packages
+ [ -e /usr/share/locale/locale.alias ] && inst_simple /usr/share/locale/locale.alias
+ [[ ${LC_ALL_LOCALE} ]] && inst_dir "/usr/share/locale/${LC_ALL_LOCALE}"
+ [[ ${LANG_LOCALE} ]] && inst_dir "/usr/share/locale/${LANG_LOCALE}"
+ [[ ${LC_MESSAGES_LOCALE} ]] && inst_dir "/usr/share/locale/${LC_MESSAGES_LOCALE}"
+ [[ ${LC_ALL_LOCALE} ]] && read LC_ALL_LOCALE_SHORT LC_ALL_LOCALE_COUNTRY < <(echo ${LC_ALL_LOCALE//_/ })
+ [[ ${LANG_LOCALE} ]] && read LANG_LOCALE_SHORT LANG_LOCALE_COUNTRY < <(echo ${LANG_LOCALE//_/ })
+ [[ ${LC_MESSAGES_LOCALE} ]] && read LC_MESSAGES_LOCALE_SHORT LC_MESSAGES_LOCALE_COUNTRY < <(echo ${LC_MESSAGES_LOCALE//_/ })
+ [[ ${LC_ALL_LOCALE_SHORT} ]] && inst_dir "/usr/share/locale/${LC_ALL_LOCALE_SHORT}"
+ [[ ${LANG_LOCALE_SHORT} ]] && inst_dir "/usr/share/locale/${LANG_LOCALE_SHORT}"
+ [[ ${LC_MESSAGES_LOCALE_SHORT} ]] && inst_dir "/usr/share/locale/${LC_MESSAGES_LOCALE_SHORT}"
+
+ locale_dirs="${LC_ALL_LOCALE} ${LANG_LOCALE} ${LC_MESSAGES_LOCALE} ${LC_ALL_LOCALE_SHORT} ${LANG_LOCALE_SHORT} {LC_MESSAGES_LOCALE_SHORT}"
+ for dir in ${locale_dirs}; do
+ [ -d "/usr/share/locale/${dir}" ] && for pkg in ${CORE_PACKAGES}; do
+ for file in `find "/usr/share/locale/${dir}" -type f -name "${pkg}.mo"`; do
+ inst_simple "${file}"
+ done
+ done
+ done
+
+ # Install ISO-8859 and Unicode charmap modules from GNU libc
+ if [ -e "${initdir}/lib/ld-linux.so.*" ]; then
+ LIBDIR=lib
+ else
+ LIBDIR=lib64
+ fi
+ inst_multiple /usr/${LIBDIR}/gconv/ISO8859-*.so
+ if [ ${UNICODE} == 1 ]; then
+ inst_multiple /usr/${LIBDIR}/gconv/UTF-*.so /usr/${LIBDIR}/gconv/UNICODE.so
+ fi
+ if command -v iconvconfig > /dev/null; then
+ if [ -e /usr/${LIBDIR}/gconv/gconv-modules ]; then
+ grep -E "^[[:space:]]*alias[[:space:]]*ISO[-]*8859-" /usr/${LIBDIR}/gconv/gconv-modules > /tmp/gconv-modules
+ if [ ${UNICODE} == 1 ]; then
+ grep -E "^[[:space:]]*alias.*UTF-" /usr/${LIBDIR}/gconv/gconv-modules >> /tmp/gconv-modules
+ grep -E "^[[:space:]]*alias.*UNICODE" /usr/${LIBDIR}/gconv/gconv-modules >> /tmp/gconv-modules
+ fi
+ grep -E "^[[:space:]]*module[[:space:]]*ISO[-]*8859-" /usr/${LIBDIR}/gconv/gconv-modules | grep INTERNAL >> /tmp/gconv-modules
+ if [ ${UNICODE} == 1 ]; then
+ grep -E "^[[:space:]]*module[[:space:]]*UTF-" /usr/${LIBDIR}/gconv/gconv-modules | grep INTERNAL >> /tmp/gconv-modules
+ grep -E "^[[:space:]]*module[[:space:]]*UNICODE" /usr/${LIBDIR}/gconv/gconv-modules | grep INTERNAL >> /tmp/gconv-modules
+ fi
+ if [ -e /tmp/gconv-modules ]; then
+ inst /tmp/gconv-modules /usr/${LIBDIR}/gconv/gconv-modules && rm -f /tmp/gconv-modules
+ fi
+ fi
+ iconvconfig --prefix="${initdir}"
+ else
+ if [ -e /usr/${LIBDIR}/gconv/gconv-modules.cache ]; then
+ inst_simple /usr/${LIBDIR}/gconv/gconv-modules.cache
+ fi
+ fi
+ fi
+
if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
inst_simple ${I18N_CONF}
else
mksubdirs ${initdir}${I18N_CONF}
- print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
+ print_vars LANG LC_ALL LC_MESSAGES >> ${initdir}${I18N_CONF}
fi
if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
diff -pruN dracut-git-orig/modules.d/10i18n/parse-i18n.sh dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/parse-i18n.sh
--- dracut-git-orig/modules.d/10i18n/parse-i18n.sh 2016-04-20 14:11:02.825944933 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/parse-i18n.sh 2016-04-19 02:26:46.617644187 +0200
@@ -23,11 +23,13 @@ inst_key_val /etc/vconsole.conf FONT_UNI
inst_key_val /etc/vconsole.conf UNICODE 1 rd.vconsole.font.unicode UNICODE vconsole.unicode
inst_key_val /etc/vconsole.conf EXT_KEYMAP '' rd.vconsole.keymap.ext EXT_KEYMAP
-inst_key_val /etc/locale.conf LANG '' rd.locale.LANG LANG
-inst_key_val /etc/locale.conf LC_ALL '' rd.locale.LC_ALL LC_ALL
-
+inst_key_val /etc/locale.conf LANG '' rd.locale.LANG LANG
+inst_key_val /etc/locale.conf LC_ALL '' rd.locale.LC_ALL LC_ALL
+inst_key_val /etc/locale.conf LC_MESSAGES '' rd.locale.LC_MESSAGES LC_MESSAGES
+
if [ -f /etc/locale.conf ]; then
. /etc/locale.conf
export LANG
export LC_ALL
+ export LC_MESSAGES
fi
diff -pruN dracut-git-orig/modules.d/10i18n/README dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/README
--- dracut-git-orig/modules.d/10i18n/README 2016-04-20 14:11:02.826944946 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/10i18n/README 2016-04-19 02:26:46.617644187 +0200
@@ -65,6 +65,7 @@ I'm leaving it in case... The following
LANG
LC_ALL
+ LC_MESSAGES
If UNICODE variable is not provided, script indicates if UTF-8 should be
used on the basis of LANG value (if it ends with ".utf8" or similar).
diff -pruN dracut-git-orig/modules.d/90crypt/module-setup.sh dracut-git-10i18n-full-support-for-localisation/modules.d/90crypt/module-setup.sh
--- dracut-git-orig/modules.d/90crypt/module-setup.sh 2016-04-19 02:19:10.662042554 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/90crypt/module-setup.sh 2016-04-23 17:09:50.584472072 +0200
@@ -88,6 +88,12 @@ install() {
inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
+ if dracut_module_included "i18n"; then
+ if [[ $msg_localisation == "yes" ]]; then
+ inst_i18n cryptsetup
+ fi
+ fi
+
if dracut_module_included "systemd"; then
inst_multiple -o \
$systemdutildir/system-generators/systemd-cryptsetup-generator \
diff -pruN dracut-git-orig/modules.d/91crypt-gpg/module-setup.sh dracut-git-10i18n-full-support-for-localisation/modules.d/91crypt-gpg/module-setup.sh
--- dracut-git-orig/modules.d/91crypt-gpg/module-setup.sh 2016-04-19 02:19:10.667042618 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/91crypt-gpg/module-setup.sh 2016-04-23 17:10:10.783667188 +0200
@@ -17,4 +17,10 @@ depends() {
install() {
inst_multiple gpg
inst "$moddir/crypt-gpg-lib.sh" "/lib/dracut-crypt-gpg-lib.sh"
+
+ if dracut_module_included "i18n"; then
+ if [[ $msg_localisation == "yes" ]]; then
+ inst_i18n gnupg
+ fi
+ fi
}
diff -pruN dracut-git-orig/modules.d/99base/init.sh dracut-git-10i18n-full-support-for-localisation/modules.d/99base/init.sh
--- dracut-git-orig/modules.d/99base/init.sh 2016-04-20 14:11:02.826944946 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/99base/init.sh 2016-04-20 14:02:01.578137511 +0200
@@ -8,6 +8,8 @@
export -p > /tmp/export.orig
+[ -f /etc/locale.conf ] && . /etc/locale.conf
+
NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
@@ -323,7 +325,7 @@ for i in $(export -p); do
i=${i%%=*}
[ -z "$i" ] && continue
case $i in
- root|PATH|HOME|TERM|PS4|RD_*)
+ root|PATH|HOME|TERM|PS4|RD_*|LANG|LC_*)
:;;
*)
unset "$i";;
diff -pruN dracut-git-orig/modules.d/99base/module-setup.sh dracut-git-10i18n-full-support-for-localisation/modules.d/99base/module-setup.sh
--- dracut-git-orig/modules.d/99base/module-setup.sh 2016-04-20 14:11:02.827944958 +0200
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/99base/module-setup.sh 2016-04-21 20:01:54.611592039 +0200
@@ -26,6 +26,10 @@ install() {
(ln -s bash "${initdir}/bin/sh" || :)
fi
+ if dracut_module_included "i18n"; then
+ inst ${moddir}/profile /etc/profile
+ fi
+
#add common users in /etc/passwd, it will be used by nfs/ssh currently
grep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
diff -pruN dracut-git-orig/modules.d/99base/profile dracut-git-10i18n-full-support-for-localisation/modules.d/99base/profile
--- dracut-git-orig/modules.d/99base/profile 1970-01-01 01:00:00.000000000 +0100
+++ dracut-git-10i18n-full-support-for-localisation/modules.d/99base/profile 2016-04-21 23:43:08.049029619 +0200
@@ -0,0 +1,9 @@
+# /etc/profile
+
+# Load locale settings
+if [ -f /etc/locale.conf ]; then
+ . /etc/locale.conf
+ [ -n "${LANG}" ] && export LANG || unset LANG
+ [ -n "${LC_ALL}" ] && export LC_ALL || unset LC_ALL
+ [ -n "${LC_MESSAGES}" ] && export LC_MESSAGES || unset LC_MESSAGES
+fi
diff -pruN dracut-git-orig/NEWS dracut-git-10i18n-full-support-for-localisation/NEWS
--- dracut-git-orig/NEWS 2016-04-19 02:19:10.648042373 +0200
+++ dracut-git-10i18n-full-support-for-localisation/NEWS 2016-04-21 17:00:46.436792093 +0200
@@ -6,6 +6,7 @@ dracut now requires libkmod for the drac
dracut.sh:
- restorecon final image file
- fail hard, if we find modules and modules.dep is missing
+- add an option to disable the new full localisation support
dracut-functions.sh:
- fix check_vol_slaves() volume group name stripping
@@ -34,6 +35,9 @@ general initramfs fixes:
- call dracut-cmdline-ask.service, if /etc/cmdline.d/*.conf exists
- break at switch_root only for bare rd.break
+i18n:
+- add full localisation support (includes message-based localisation)
+
dmsquash-live:
- fixed livenet-generator execution flag
and include only, if systemd is used
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
