On 21.04.2016 14:30, Guido Trentalancia wrote:
> Hello Harald !
>
> On Thu, 21/04/2016 Guido Trentalancia wrote:
>>> Compile and install locale definitions using localedef from GNU
>>> libc or,
>>> if locale definitions cannot be compiled but are available on the
>>> system
>>> as split definitions, just install them.
>>>
>>> The resulting locale definitions archive contains at most two
>>> different
>>> locale definitions, therefore its size is relatively small.
>>>
>>> Add support for localised messages from core packages
>>> (LC_MESSAGES).
>>
>> Do we really need this in the initramfs?
>
> It's a killer functionality !!! And it requires very little extra disk
> space compared to the actual initramfs. You know, we tend not to use
> the floppy disk anymore nowadays !...
>
> If you agree with me, I will be glad to keep working on it so that the
> change you propose are introduced. There are not few changes proposed
> and they need testing, I will only carry them out if you are then
> really going to commit the whole work.
>
> Please confirm and I'll be glad to help.
Confirmed, if you add an option to turn the installing of the message catalogs off.
Also see my other comments in the original reply.
>
> Regards,
>
> Guido
>
>>> Add support for non-latin fonts using Unicode (tested successfully
>>> with
>>> Greek, Hebrew and Cyrillic).
>>>
>>> This revised version fixes several issues in the initial patch
>>> (including
>>> the possibility to build locale definitions). Thanks to Andrei
>>> Borzenkov
>>> for reviewing the initial patch and providing useful suggestions.
>>>
>>> Signed-off-by: Guido Trentalancia <guido@xxxxxxxxxxxxxxxx>
>>> ---
>>> modules.d/10i18n/README | 1
>>> modules.d/10i18n/console_init.sh | 24 +++++++++++
>>> modules.d/10i18n/module-setup.sh | 82
>>> +++++++++++++++++++++++++++++++++++++--
>>> modules.d/10i18n/parse-i18n.sh | 8 ++-
>>> modules.d/99base/bashrc | 9 ++++
>>> modules.d/99base/init.sh | 4 +
>>> modules.d/99base/module-setup.sh | 4 +
>>> 7 files changed, 125 insertions(+), 7 deletions(-)
>>>
>>> diff -pruN dracut-git-orig/modules.d/10i18n/console_init.sh dracut-
>>> git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/console_init.sh
>>> --- dracut-git-orig/modules.d/10i18n/console_init.sh 2016-
>>> 04-20 14:11:02.824944921 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/console_init.sh 2016-04-20
>>> 14:01:51.452010155 +0200
>>> @@ -74,6 +74,28 @@ devname=${dev#/dev/}
>>> exit 1
>>> }
>>>
>>> +shopt -q -s nocasematch
>>> +if [[ ${UNICODE} ]]
>>> +then
>>> + if [[ ${UNICODE} = YES || ${UNICODE} = 1 ]]
>>> + then
>>> + UNICODE=1
>>> + elif [[ ${UNICODE} = NO || ${UNICODE} = 0 ]]
>>> + then
>>> + UNICODE=0
>>> + else
>>> + UNICODE=''
>>> + fi
>>> +fi
>>> +if [[ ! ${UNICODE} && ${LANG} =~ .*\.UTF-?8 ]]
>>> +then
>>> + UNICODE=1
>>> +fi
>>> +shopt -q -u nocasematch
>>> +
>>> +[[ ${UNICODE} == 1 && ${FONT} && ! ${FONT_MAP} ]] && [ -x
>>> /usr/bin/unicode_start ] && /usr/bin/unicode_start ${FONT}
>>> +[[ ${UNICODE} == 1 && ${FONT} && ${FONT_MAP} ]] && [ -x
>>> /usr/bin/unicode_start ] && /usr/bin/unicode_start ${FONT}
>>> ${FONT_MAP}
>>> +
>>> dev_open ${dev}
>>>
>>> for fd in 6 7; do
>>> @@ -89,5 +111,7 @@ set_terminal ${dev}
>>> set_font ${dev}
>>> set_keymap
>>>
>>> +reset
>>> +
>>> dev_close
>>
>> Please don't use bashisms in initramfs scripts which are not
>> explicitly marked with "#!/bin/bash".
>> To test it:
>> - install "dash"
>> - run "make syncheck"
>> - activate the "00dash" dracut module and boot with it
>>
>>>
>>> diff -pruN dracut-git-orig/modules.d/10i18n/module-setup.sh dracut-
>>> git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/module-setup.sh
>>> --- dracut-git-orig/modules.d/10i18n/module-setup.sh 2016-
>>> 04-20 14:11:02.825944933 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/module-setup.sh 2016-04-20
>>> 14:44:39.610119250 +0200
>>> @@ -1,10 +1,15 @@
>>> #!/bin/bash
>>>
>>> +# Updated: Guido Trentalancia <guido@xxxxxxxxxxxxxxxx>
>>> +#
>>> +# Added full localisation support (including message-based
>>> +# program localisation and support for non-latin charsets)
>>
>> git history should be enough, we don't mention it in the individual
>> files
>>
>>> +
>>> # called by dracut
>>> check() {
>>> [[ "$mount_needs" ]] && return 1
>>>
>>> - require_binaries setfont loadkeys kbd_mode || return 1
>>> + require_binaries setfont loadkeys kbd_mode unicode_start stty
>>> tty tset reset || return 1
>>>
>>> return 0
>>> }
>>> @@ -26,6 +31,15 @@ install() {
>>> DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
>>> I18N_CONF="/etc/locale.conf"
>>> VCONFIG_CONF="/etc/vconsole.conf"
>>> + LOCALISED_PACKAGES="libc bash coreutils util-linux e2fsprogs
>>> grep sed kbd cryptsetup"
>>> +
>>> + if dracut_module_included "crypt"; then
>>> + LOCALISED_PACKAGES="${LOCALISED_PACKAGES} cryptsetup"
>>> + fi
>>> +
>>> + if dracut_module_included "crypt-gpg"; then
>>> + LOCALISED_PACKAGES="${LOCALISED_PACKAGES} gnupg"
>>> + fi
>>
>> I would create a function like "inst_i18n <prog>" which should be
>> called by the individual dracut modules in their install()
>> section, rather than hardcoding it here.
>>
>>>
>>> # This is from 10redhat-i18n.
>>> findkeymap () {
>>> @@ -93,7 +107,7 @@ install() {
>>> }
>>>
>>> install_base() {
>>> - inst_multiple setfont loadkeys kbd_mode stty
>>> + inst_multiple setfont loadkeys kbd_mode unicode_start stty
>>> tty tset reset
>>>
>>> if ! dracut_module_included "systemd"; then
>>> inst ${moddir}/console_init.sh /lib/udev/console_init
>>> @@ -205,11 +219,73 @@ install() {
>>> inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
>>> fi
>>>
>>> + [[ ${LC_ALL} || ${LANG} || ${LC_MESSAGES} ]] && inst_dir
>>> /usr/lib/locale
>>> +
>>> + # Check if we can compile locale definitions
>>> + command -v localedef > /dev/null && HAS_LOCALEDEF=true ||
>>> HAS_LOCALEDEF=false
>>> + [ ${LC_ALL} ] && LC_ALL_LOCALE=`echo ${LC_ALL} | awk -F.
>>> '{ print $1 }'` && LC_ALL_CHARMAP=`echo ${LC_ALL} | awk -F. '{
>>> print $2 }'`
>>
>> awk free version :)
>>
>> $ read LC_ALL_LOCALE LC_ALL_CHARMAP < <(echo ${LC_ALL//./ }); echo
>> $LC_ALL_LOCALE; echo $LC_ALL_CHARMAP
>> de_DE
>> UTF-8
>>
>>
>>> + [ ${LANG} ] && LANG_LOCALE=`echo ${LANG} | awk -F. '{
>>> print $1 }'` && LANG_CHARMAP=`echo ${LANG} | awk -F. '{ print $2
>>> }'`
>>> + [ ${LC_MESSAGES} ] && LC_MESSAGES_LOCALE=`echo
>>> ${LC_MESSAGES} | awk -F. '{ print $1 }'` &&
>>> LC_MESSAGES_CHARMAP=`echo ${LC_MESSAGES} | awk -F. '{ print $2 }'`
>>> + [[ -e /usr/share/i18n/locales/${LC_ALL_LOCALE} || -e
>>> /usr/share/i18n/locales/${LANG_LOCALE} || -e
>>> /usr/share/i18n/locales/${LC_MESSAGES_LOCALE} ]] &&
>>> HAS_LOCALE_SOURCES=true || HAS_LOCALE_SOURCES=false
>>> + [[ ${HAS_LOCALEDEF} == true && ${HAS_LOCALE_SOURCES} ==
>>> true ]] && CAN_BUILD_LOCALE=true || CAN_BUILD_LOCALE=false
>>> +
>>> + # Generate locale definitions for LC_ALL
>>> + [[ ${LC_ALL} && ${LC_ALL_LOCALE} && ${LC_ALL_CHARMAP} ]]
>>> && [ ${CAN_BUILD_LOCALE} == true ] && [ -e
>>> /usr/share/i18n/locales/${LC_ALL_LOCALE} ] && localedef --
>>> prefix="${initdir}" -i ${LC_ALL_LOCALE} -f ${LC_ALL_CHARMAP}
>>> ${LC_ALL}
>>> +
>>> + # Generate locale definitions for LANG
>>> + [[ ${LANG} && ${LANG_LOCALE} && ${LANG_CHARMAP} ]] && [
>>> ${CAN_BUILD_LOCALE} == true ] && [ -e
>>> /usr/share/i18n/locales/${LANG_LOCALE} ] && localedef --
>>> prefix="${initdir}" -i ${LANG_LOCALE} -f ${LANG_CHARMAP} ${LANG}
>>> +
>>> + # Generate locale definitions for LC_MESSAGES
>>> + [[ ${LC_MESSAGES} && ${LC_MESSAGES_LOCALE} &&
>>> ${LC_MESSAGES_CHARMAP} ]] && [ ${CAN_BUILD_LOCALE} == true ] && [
>>> -e /usr/share/i18n/locales/${LC_MESSAGES_LOCALE} ] && localedef --
>>> prefix="${initdir}" -i ${LC_MESSAGES_LOCALE} -f
>>> ${LC_MESSAGES_CHARMAP} ${LC_MESSAGES}
>>> +
>>> + # If locale definitions cannot be built, but compiled
>>> split definitions are
>>> + # available, then install them
>>> + [ ${LC_ALL} ] && [ ${CAN_BUILD_LOCALE} == false ] && [ -d
>>> /usr/lib/locale/${LC_ALL} ] && cp -prfL -t
>>> "${initdir}/usr/lib/locale/" /usr/lib/locale/${LC_ALL}
>>> + [ ${LANG} ] && [ ${CAN_BUILD_LOCALE} == false ] && [ -d
>>> /usr/lib/locale/${LANG} ] && cp -prfL -t
>>> "${initdir}/usr/lib/locale/" /usr/lib/locale/${LANG}
>>> + [ ${LC_MESSAGES} ] && [ ${CAN_BUILD_LOCALE} == false ] &&
>>> [ -d /usr/lib/locale/${LC_MESSAGES} ] && cp -prfL -t
>>> "${initdir}/usr/lib/locale/" /usr/lib/locale/${LC_MESSAGES}
>>
>> you really don't like "if ; then; else" :)
>>
>>> +
>>> + # Install individual localisation files for core packages
>>> + [ -e /usr/share/locale/locale.alias ] && inst_simple
>>> /usr/share/locale/locale.alias
>>> + [ ${LC_ALL_LOCALE} ] && inst_dir
>>> /usr/share/locale/${LC_ALL_LOCALE}
>>> + [ ${LANG_LOCALE} ] && inst_dir
>>> /usr/share/locale/${LANG_LOCALE}
>>> + [ ${LC_MESSAGES_LOCALE} ] && inst_dir
>>> /usr/share/locale/${LC_MESSAGES_LOCALE}
>>> + [ ${LC_ALL_LOCALE} ] && LC_ALL_LOCALE_SHORT=`echo
>>> ${LC_ALL_LOCALE} | awk -F_ '{ print $1 }'`
>>> + [ ${LANG_LOCALE} ] && LANG_LOCALE_SHORT=`echo
>>> ${LANG_LOCALE} | awk -F_ '{ print $1 }'`
>>> + [ ${LC_MESSAGES_LOCALE} ] &&
>>> LC_MESSAGES_LOCALE_SHORT=`echo ${LC_MESSAGES_LOCALE} | awk -F_ '{
>>> print $1 }'`
>>
>> please don't use backticks... use $() every time
>>
>>> + [ ${LC_ALL_LOCALE_SHORT} ] && inst_dir
>>> /usr/share/locale/${LC_ALL_LOCALE_SHORT}
>>> + [ ${LANG_LOCALE_SHORT} ] && inst_dir
>>> /usr/share/locale/${LANG_LOCALE_SHORT}
>>> + [ ${LC_MESSAGES_LOCALE_SHORT} ] && inst_dir
>>> /usr/share/locale/${LC_MESSAGES_LOCALE_SHORT}
>>> +
>>> + locale_dirs="${LC_ALL_LOCALE} ${LANG_LOCALE}
>>> ${LC_MESSAGES_LOCALE} ${LC_ALL_LOCALE_SHORT} ${LANG_LOCALE_SHORT}
>>> {LC_MESSAGES_LOCALE_SHORT}"
>>> + for dir in ${locale_dirs}; do
>>> + [ -d /usr/share/locale/${dir} ] && for pkg in
>>> ${LOCALISED_PACKAGES}; do
>>> + for file in `find /usr/share/locale/${dir} -type f
>>> -name "${pkg}.mo"`; do
>>
>> not expected, but this fails for files with spaces in the name
>>
>>> + cp -pfL --parents -t "${initdir}/" ${file};
>>
>> what's wrong with "inst_simple" ?
>>
>>> + done
>>> + done
>>> + done
>>> +
>>> + # Install some of the GNU libc charmap modules
>>> + [ -e "${initdir}/lib/ld-linux.so.*" ] && LIBDIR=lib ||
>>> LIBDIR=lib64
>>> + inst_simple /usr/${LIBDIR}/gconv/ISO8859-*.so
>>> + [ ${UNICODE} == 1 ] && inst_multiple
>>> /usr/${LIBDIR}/gconv/UTF-*.so
>>> + [ ${UNICODE} == 1 ] && inst_simple
>>> /usr/${LIBDIR}/gconv/UNICODE.so
>>
>> inst_simple would not install any library deps. better add it to the
>> above line
>> [ ${UNICODE} == 1 ] && inst_multiple /usr/${LIBDIR}/gconv/UNICODE.so
>> /usr/${LIBDIR}/gconv/UTF-*.so
>>
>>
>>> + command -v iconvconfig > /dev/null && HAS_ICONVCONFIG=true
>>> || HAS_ICONVCONFIG=false
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ -e
>>> /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*alias" | grep
>>> ISO8859- > /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ ${UNICODE} == 1 ] && [
>>> -e /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*alias" | grep
>>> UTF- >> /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ ${UNICODE} == 1 ] && [
>>> -e /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*alias" | grep
>>> UNICODE >> /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ -e
>>> /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*module" | grep
>>> ISO8859- | grep INTERNAL >> /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ ${UNICODE} == 1 ] && [
>>> -e /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*module" | grep
>>> UTF- | grep INTERNAL >> /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ ${UNICODE} == 1 ] && [
>>> -e /usr/${LIBDIR}/gconv/gconv-modules ] && cat
>>> /usr/${LIBDIR}/gconv/gconv-modules | grep "^[\t\ ]*module" | grep
>>> UNICODE | grep INTERNAL >> /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && [ -e /tmp/gconv-modules
>>> ] && inst /tmp/gconv-modules /usr/${LIBDIR}/gconv/gconv-modules &&
>>> rm -f /tmp/gconv-modules
>>> + [ ${HAS_ICONVCONFIG} == true ] && iconvconfig --
>>> prefix="${initdir}"
>>> + [ ${HAS_ICONVCONFIG} == false ] && [ -e
>>> /usr/${LIBDIR}/gconv/gconv-modules.cache ] && inst_simple
>>> /usr/${LIBDIR}/gconv/gconv-modules.cache
>>
>> why no "if command -v iconvconfig >/dev/null; then ... else ... fi"
>> ??
>>
>> no need for " cat <file> | grep <pattern> " use "grep <pattern>
>> <file>" directly
>>
>> why grep | grep ?? why not:
>>
>> grep -E "^[[:space:]]*alias.*ISO8859-" /usr/${LIBDIR}/gconv/gconv-
>> modules
>>
>>
>>> +
>>> if dracut_module_included "systemd" && [[ -f ${I18N_CONF}
>>> ]]; then
>>> inst_simple ${I18N_CONF}
>>> else
>>> mksubdirs ${initdir}${I18N_CONF}
>>> - print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
>>> + print_vars LANG LC_ALL LC_MESSAGES >>
>>> ${initdir}${I18N_CONF}
>>> fi
>>>
>>> if dracut_module_included "systemd" && [[ -f
>>> ${VCONFIG_CONF} ]]; then
>>> diff -pruN dracut-git-orig/modules.d/10i18n/parse-i18n.sh dracut-
>>> git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/parse-i18n.sh
>>> --- dracut-git-orig/modules.d/10i18n/parse-i18n.sh 2016-04-
>>> 20 14:11:02.825944933 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/parse-i18n.sh 2016-04-19
>>> 02:26:46.617644187 +0200
>>> @@ -23,11 +23,13 @@ inst_key_val /etc/vconsole.conf FONT_UNI
>>> inst_key_val /etc/vconsole.conf UNICODE 1
>>> rd.vconsole.font.unicode UNICODE vconsole.unicode
>>> inst_key_val /etc/vconsole.conf EXT_KEYMAP ''
>>> rd.vconsole.keymap.ext EXT_KEYMAP
>>>
>>> -inst_key_val /etc/locale.conf LANG ''
>>> rd.locale.LANG LANG
>>> -inst_key_val /etc/locale.conf LC_ALL ''
>>> rd.locale.LC_ALL LC_ALL
>>> -
>>> +inst_key_val /etc/locale.conf LANG ''
>>> rd.locale.LANG LANG
>>> +inst_key_val /etc/locale.conf LC_ALL ''
>>> rd.locale.LC_ALL LC_ALL
>>> +inst_key_val /etc/locale.conf LC_MESSAGES ''
>>> rd.locale.LC_MESSAGES LC_MESSAGES
>>> +
>>> if [ -f /etc/locale.conf ]; then
>>> . /etc/locale.conf
>>> export LANG
>>> export LC_ALL
>>> + export LC_MESSAGES
>>> fi
>>> diff -pruN dracut-git-orig/modules.d/10i18n/README dracut-git-
>>> 10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/README
>>> --- dracut-git-orig/modules.d/10i18n/README 2016-04-20
>>> 14:11:02.826944946 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/10i18n/README 2016-04-19
>>> 02:26:46.617644187 +0200
>>> @@ -65,6 +65,7 @@ I'm leaving it in case... The following
>>>
>>> LANG
>>> LC_ALL
>>> + LC_MESSAGES
>>>
>>> If UNICODE variable is not provided, script indicates if UTF-8
>>> should be
>>> used on the basis of LANG value (if it ends with ".utf8" or
>>> similar).
>>> diff -pruN dracut-git-orig/modules.d/99base/bashrc dracut-git-
>>> 10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/bashrc
>>> --- dracut-git-orig/modules.d/99base/bashrc 1970-01-01
>>> 01:00:00.000000000 +0100
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/bashrc 2016-04-20
>>> 14:22:39.804711030 +0200
>>> @@ -0,0 +1,9 @@
>>> +# /etc/bashrc
>>> +
>>> +# Load locale settings
>>> +if [ -f /etc/locale.conf ]; then
>>> + . /etc/locale.conf
>>> + [ -n "${LANG}" ] && export LANG || unset LANG
>>> + [ -n "${LC_ALL}" ] && export LC_ALL || unset LC_ALL
>>> + [ -n "${LC_MESSAGES}" ] && export LC_MESSAGES || unset
>>> LC_MESSAGES
>>> +fi
>>> diff -pruN dracut-git-orig/modules.d/99base/init.sh dracut-git-
>>> 10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/init.sh
>>> --- dracut-git-orig/modules.d/99base/init.sh 2016-04-20
>>> 14:11:02.826944946 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/init.sh 2016-04-20
>>> 14:02:01.578137511 +0200
>>> @@ -8,6 +8,8 @@
>>>
>>> export -p > /tmp/export.orig
>>>
>>> +[ -f /etc/locale.conf ] && . /etc/locale.conf
>>> +
>>> NEWROOT="/sysroot"
>>> [ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
>>>
>>> @@ -323,7 +325,7 @@ for i in $(export -p); do
>>> i=${i%%=*}
>>> [ -z "$i" ] && continue
>>> case $i in
>>> - root|PATH|HOME|TERM|PS4|RD_*)
>>> + root|PATH|HOME|TERM|PS4|RD_*|LANG|LC_*)
>>> :;;
>>> *)
>>> unset "$i";;
>>> diff -pruN dracut-git-orig/modules.d/99base/module-setup.sh dracut-
>>> git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/module-setup.sh
>>> --- dracut-git-orig/modules.d/99base/module-setup.sh 2016-
>>> 04-20 14:11:02.827944958 +0200
>>> +++ dracut-git-10i18n-add-support-for-custom-locale-
>>> definitions/modules.d/99base/module-setup.sh 2016-04-19
>>> 02:26:46.619644212 +0200
>>> @@ -26,6 +26,10 @@ install() {
>>> (ln -s bash "${initdir}/bin/sh" || :)
>>> fi
>>>
>>> + if dracut_module_included "i18n"; then
>>> + inst ${moddir}/bashrc /etc/bashrc
>>> + fi
>>> +
>>
>> maybe only check if bash installed and maybe use /etc/profile to be
>> shell agnostic
>>
>>> #add common users in /etc/passwd, it will be used by nfs/ssh
>>> currently
>>> grep '^root:' "$initdir/etc/passwd" 2>/dev/null ||
>>> echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
>>> grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
>>> --
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
