Am 27.05.2015 um 14:39 schrieb Gerhard Wiesinger: > On 27.05.2015 14:25, Harald Hoyer wrote: >> Am 27.05.2015 um 14:13 schrieb Andrei Borzenkov: >>> On Wed, May 27, 2015 at 3:09 PM, Gerhard Wiesinger <lists@xxxxxxxxxxxxx> wrote: >>>> On 27.05.2015 13:56, Harald Hoyer wrote: >>>>> Am 27.05.2015 um 13:28 schrieb Gerhard Wiesinger: >>>>>> Hello, >>>>>> >>>>>> After upgrading one machine it does't boot anymore. Booting the old >>>>>> kernel >>>>>> works well. >>>>>> >>>>>> It is a RAID, LUKS, LVM setup. Find relevant details below. >>>>>> >>>>>> So it looks RAID assembling doesn't work any more. >>>>>> >>>>>> Any ideas? >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Ciao, >>>>>> Gerhard >>>>>> >>>>>> blkid >>>>>> /dev/sda1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="5ec6792c-01" >>>>>> /dev/sdb1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="1c7cffaf-01" >>>>>> /dev/sdc1: UUID="56e9bde4-5cd1-630d-188c-22a54c1c8c37" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="0079dfc3-01" >>>>>> /dev/sdd1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="fadeaffe-01" >>>>>> /dev/sde1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="539b5814-01" >>>>>> /dev/sdf1: UUID="eb295015-e20b-e133-15db-5c9130487300" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="badeaffe-01" >>>>>> /dev/sdh1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="15631562-01" >>>>>> /dev/sdg1: UUID="51e8e983-8786-b868-dbc3-87357e1a9534" >>>>>> TYPE="linux_raid_member" >>>>>> PARTUUID="162f0d0b-01" >>>>>> >>>>>> >>>>>> blkid -o udev >>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=5ec6792c-01 >>>>>> >>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=1c7cffaf-01 >>>>>> >>>>>> ID_FS_UUID=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_UUID_ENC=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=0079dfc3-01 >>>>>> >>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=fadeaffe-01 >>>>>> >>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=539b5814-01 >>>>>> >>>>>> ID_FS_UUID=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_UUID_ENC=eb295015-e20b-e133-15db-5c9130487300 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=badeaffe-01 >>>>>> >>>>>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534 >>>>>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=15631562-01 >>>>>> >>>>>> ID_FS_UUID=51e8e983-8786-b868-dbc3-87357e1a9534 >>>>>> ID_FS_UUID_ENC=51e8e983-8786-b868-dbc3-87357e1a9534 >>>>>> ID_FS_TYPE=linux_raid_member >>>>>> ID_FS_PARTUUID=162f0d0b-01 >>>>>> >>>>>> [ 2.479836] myhost systemd[1]: Device >>>>>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0.device appeared >>>>>> twice >>>>>> with different sysfs paths /sys >>>>>> >>>>>> /devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh >>>>>> >>>>>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1.0/host8/target >>>>>> 8:0:0/8:0:0:0/block/sdg >>>>>> [ 2.500826] myhost systemd[1]: Device >>>>>> dev-disk-by\x2did-usb\x2dUSBDisk_RunDisk_ABCDEFGH\x2d0:0\x2dpart1.device >>>>>> appeared twice with different sysfs p >>>>>> aths >>>>>> >>>>>> /sys/devices/pci0000:00/0000:00:04.1/usb2/2-5/2-5:1.0/host9/target9:0:0/9:0:0:0/block/sdh/sdh1 >>>>>> >>>>>> and /sys/devices/pci0000:00/0000:00:02.1/usb1/1-5/1-5:1. >>>>>> 0/host8/target8:0:0/8:0:0:0/block/sdg/sdg1 >>>>>> [ 2.632754] myhost kernel: Switched to clocksource tsc >>>>>> [ 91.162986] myhost systemd[1]: Job dev-md0.device/start timed out. >>>>>> [ 91.163138] myhost systemd[1]: Timed out waiting for device >>>>>> dev-md0.device. >>>>>> [ 91.163251] myhost systemd[1]: Dependency failed for Cryptography >>>>>> Setup for >>>>>> luks-md0. >>>>>> [ 91.163360] myhost systemd[1]: Dependency failed for >>>>>> dev-mapper-luks\x2dmd0.device. >>>>>> [ 91.163474] myhost systemd[1]: Job dev-mapper-luks\x2dmd0.device/start >>>>>> failed with result 'dependency'. >>>>>> [ 91.163586] myhost systemd[1]: Dependency failed for Encrypted >>>>>> Volumes. >>>>>> [ 91.163694] myhost systemd[1]: Job cryptsetup.target/start failed with >>>>>> result 'dependency'. >>>>>> [ 91.163801] myhost systemd[1]: Job >>>>>> systemd-cryptsetup@luks\x2dmd0.service/start failed with result >>>>>> 'dependency'. >>>>>> [ 91.163910] myhost systemd[1]: Job dev-md0.device/start failed with >>>>>> result >>>>>> 'timeout'. >>>>>> [ 91.164021] myhost systemd[1]: Reached target System Initialization. >>>>>> [ 91.164129] myhost systemd[1]: Starting System Initialization. >>>>>> [ 91.164236] myhost systemd[1]: Reached target Basic System. >>>>>> [ 91.164346] myhost systemd[1]: Starting Basic System. >>>>>> [ 185.740238] myhost dracut-initqueue[340]: Warning: Could not boot. >>>>>> [ 185.741266] myhost systemd[1]: Received SIGRTMIN+20 from PID 341 >>>>>> (plymouthd). >>>>>> [ 185.841257] myhost dracut-initqueue[340]: Warning: >>>>>> /dev/VolGroup00/root does >>>>>> not exist >>>>>> [ 185.841403] myhost systemd[1]: Starting Dracut Emergency Shell... >>>>>> [ 185.859366] myhost systemd[1]: Received SIGRTMIN+21 from PID 341 >>>>>> (plymouthd). >>>>>> >>>>>> dracut:/# cat "/run/initramfs/rdsosreport.txt" >>>>>> + cat /lib/dracut/dracut-041-10.fc22.1 >>>>>> dracut-041-10.fc22.1 >>>>>> + cat /proc/cmdline >>>>>> BOOT_IMAGE=/vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro >>>>>> quiet >>>>>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16 >>>>>> LANG=en_US.UTF- >>>>>> 8 KEYTABLE=de-latin1 >>>>> >>>>> your kernel cmdline seems to be missing the raid configuration >>>>> >>>>> rd.md.uuid=56e9bde4-5cd1-630d-188c-22a54c1c8c37 >>>>> rd.md.uuid=eb295015-e20b-e133-15db-5c9130487300 >>>>> rd.md.uuid=51e8e983-8786-b868-dbc3-87357e1a9534 >>>>> >>>>> ... whatever is needed to boot your system. >>>>> >>>>> # dracut --print-cmdline >>>>> >>>>> should tell you what kernel cmdline parameters are needed >>>> >>>> >>>> Thank you for the fast reply. >>>> >>>> # comment: 3 separate lines!!!!! (maybe a problem) >>>> dracut --print-cmdline >>>> rd.luks.uuid=luks-0c66fc77-a8a0-49e6-b96c-55e886a91f09 >>>> rd.lvm.lv=VolGroup00/root >>>> rd.lvm.lv=VolGroup00/swap >>>> rd.md.uuid=51e8e983:8786b868:dbc38735:7e1a9534 >>>> rd.md.uuid=56e9bde4:5cd1630d:188c22a5:4c1c8c37 >>>> resume=/dev/mapper/VolGroup00-swap root=/dev/mapper/VolGroup00-root >>>> rootflags=rw,relatime,data=ordered rootfstype=ext4 >>>> >>>> dracut --force 4.0.4-301.fc22.x86_64 >>>> >>>> Still no correct entry in /etc/grub2.cfg >>> I would be very surprised if dracut made any changes to grub.cfg. As I >>> understand it, you either build host-specific dracut that will include >>> this emulated command line or you have to add lines manually to your >>> boot loader configuration. >>> >>>> linux16 /vmlinuz-4.0.4-301.fc22.x86_64 root=/dev/VolGroup00/root ro quiet >>>> console=ttyS0,115200n8 rd_NO_PLYMOUTH SYSFONT=latarcyrheb-sun16 >>>> LANG=en_US.UTF-8 KEYTABLE=de-latin1 >>>> >>>> Looks like a bug to me. >> You have to add the options manually to the grub conf and all in the same line. >> >> dracut does not modify your grub configuration. > OK, I thought it was modifying it, at least in the past. > > Added it manually and it worked well. > > What's still strange: > > Last lines after startup, luks-md0 has already been started as the root fs is > there .... > Starting Cryptography Setup for luks-md0... > Starting Authorization Manager... > > Fedora release 22 (Twenty Two) > Kernel 4.0.4-301.fc22.x86_64 on an x86_64 (ttyS0) > > # Rebooting, why is a passphrase necessary here? > reboot > Please enter passphrase for disk luks-md0! > > Possible bug here? > > Ciao, > Gerhard > Did you add " rd.luks.uuid=luks-0c66fc77-a8a0-49e6-b96c-55e886a91f09 " also? What is your /etc/crypttab ? -- To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
