My commandline is as follows: BOOT_IMAGE=/vmlinuz-3.10.9-200.fc19.x86_64 root=UUID=b5855018-5b09-4cbd-a7fc-0516dd5e7a0a ro rd.lvm.vg.uuid=gK6vvj-uE7w-E6i0-nZOr-WtbN-cJbJ-gxd82v rd.dm=0 rd.luks.uuid=luks-770c95fa-3ce3-4908-a491-8710d679fa68 rd.md.uuid=613e00b8:220a6e5b:0caa4d15:e981bbb1 rd.md.uuid=01f167fc:5607540d:b2274dec:482834f2 vconsole.keymap=us rd.fips fips=0 intel_iommu=pt rhgb quiet LANG=en_US.utf8 The disk never gets mounted to my knowledge. When booted, autofs mounts the disk in /mnt/usb/boot and the /boot folder is a symlink that points there. Inside the initramfs this is duplicated (/boot symlink to /mnt/usb/boot), which contains the encryption keyfile. On Sun, Aug 25, 2013 at 11:23 PM, Harald Hoyer <harald@xxxxxxxxxx> wrote: > On 08/26/2013 12:58 AM, Benjamin Kingston wrote: >> I have my boot partition on a pin protected flash drive and have >> embedded the encryption keyfile for my filesystem in my initramfs >> image to automate unlocking my computer with just the flash pin. The >> issue with this comes when generating the initramfs through dracut, >> because the boot disk is mounted and listed in /proc/self/mountinfo >> and gets a systemd entry that requires it to be brought online. >> >> Since the keyfile is embedded in the image in ram the boot disk is not >> needed to be brought online, but since the USB is reset, this requires >> me to enter the pin on the flash drive a second time, just to unlock >> the volume to satisfy systemd. >> >> is there a way to ignore a particular device when running dracut, or >> at least change its timeout and systemd status to not be boot >> effecting? > > > What is your kernel cmdline? > Where is the disk mounted in the initramfs? > -- To unsubscribe from this list: send the line "unsubscribe initramfs" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
