Use the new fsleep() function in the remaining driver instances.
Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
---
drivers/iio/chemical/bme680_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index 9002519d2c33..2ff85e29bfc1 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -544,7 +544,7 @@ static int bme680_wait_for_eoc(struct bme680_data *data)
data->oversampling_humid) * 1936) + (477 * 4) +
(477 * 5) + 1000 + (data->heater_dur * 1000);
- usleep_range(wait_eoc_us, wait_eoc_us + 100);
+ fsleep(wait_eoc_us);
ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
if (ret) {
@@ -890,7 +890,7 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
if (ret < 0)
return dev_err_probe(dev, ret, "Failed to reset chip\n");
- usleep_range(BME680_STARTUP_TIME_US, BME680_STARTUP_TIME_US + 1000);
+ fsleep(BME680_STARTUP_TIME_US);
ret = regmap_read(regmap, BME680_REG_CHIP_ID, &data->check);
if (ret < 0)
--
2.43.0
