Allow configure the resistance used during precharge.
Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes since v4:
- Add multipleOf propery
- Move description at the end, to match convension.
Changes since v3:
- Fix maximum field. Check make dt_binding_check passes.
Changes since v2:
- Change kOhms into ohms.
Changes since v1:
- Suffix property with kOhms.
.../bindings/iio/proximity/semtech,sx9360.yaml | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
index 63e1a1fd00d4c..f088c5d2be99c 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -61,6 +61,14 @@ properties:
UINT_MAX (4294967295) represents infinite. Other values
represent 1-1/N.
+ semtech,input-precharge-resistor-ohms:
+ default: 0
+ multipleOf: 2000
+ minimum: 0
+ maximum: 30000
+ description:
+ Pre-charge input resistance in Ohm.
+
required:
- compatible
- reg
@@ -85,5 +93,6 @@ examples:
semtech,resolution = <256>;
semtech,proxraw-strength = <2>;
semtech,avg-pos-strength = <64>;
+ semtech,input-precharge-resistor-ohms = <4000>;
};
};
--
2.36.0.464.gb9c8b46e94-goog
