On Tue, Apr 19, 2022 at 06:08:27PM +0300, Cosmin Tanislav wrote: > AD4130-8 is an ultra-low power, high precision, measurement solution for > low bandwidth battery operated applications. > > The fully integrated AFE (Analog Front-End) includes a multiplexer for up > to 16 single-ended or 8 differential inputs, PGA (Programmable Gain > Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator, > selectable filter options, smart sequencer, sensor biasing and excitation > options, diagnostics, and a FIFO buffer. > > Signed-off-by: Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> > --- > .../bindings/iio/adc/adi,ad4130.yaml | 264 ++++++++++++++++++ > 1 file changed, 264 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml > new file mode 100644 > index 000000000000..32996b62cd20 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml > @@ -0,0 +1,264 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2022 Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD4130 ADC device driver > + > +maintainers: > + - Cosmin Tanislav <cosmin.tanislav@xxxxxxxxxx> > + > +description: | > + Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf > + > +properties: > + compatible: > + enum: > + - adi,ad4130-8-16-lfcsp > + - adi,ad4130-8-16-wlcsp > + - adi,ad4130-8-24-lfcsp > + - adi,ad4130-8-24-wlcsp What is lfcsp? wlcsp seems to be the package type which generally shouldn't be part of the compatible. > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + description: phandle to the master clock (mclk) > + > + clock-names: > + items: > + - const: mclk > + > + interrupts: > + maxItems: 1 > + > + interrupt-names: > + description: | Don't need '|' if there is no formatting to preserve. > + Specify which interrupt pin should be configured as Data Ready / FIFO > + interrupt. > + Default if not supplied is dout-int. default: dout-int > + enum: > + - dout-int > + - clk > + - p2 > + - dout > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + refin1-supply: > + description: refin1 supply. Can be used as reference for conversion. > + > + refin2-supply: > + description: refin2 supply. Can be used as reference for conversion. > + > + avdd-supply: > + description: AVDD voltage supply. Can be used as reference for conversion. > + > + iovdd-supply: > + description: IOVDD voltage supply. Used for the chip interface. > + > + spi-max-frequency: > + maximum: 5000000 > + > + adi,int-clk-out: > + description: Specify if the internal clock should be exposed on the CLK pin. > + type: boolean > + > + adi,ext-clk-freq: > + description: Specify the frequency of the external clock. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [76800, 153600] > + default: 76800 > + > + adi,bipolar: > + description: Specify if the device should be used in bipolar mode. > + type: boolean > + > + adi,vbias-pins: > + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + maxItems: 16 > + items: > + minimum: 0 > + maximum: 15 > + > +required: > + - compatible > + - reg > + - interrupts > + > +patternProperties: > + "^channel@([0-9]|1[0-5])$": > + type: object > + $ref: adc.yaml unevaluatedProperties: false > + > + properties: > + reg: > + description: | > + The channel number. > + items: > + minimum: 0 > + maximum: 15 > + > + diff-channels: > + description: | > + Besides the analog inputs available, internal inputs can be used. > + 16: Internal temperature sensor. > + 17: AVSS > + 18: Internal reference > + 19: DGND > + 20: (AVDD − AVSS)/6+ > + 21: (AVDD − AVSS)/6- > + 22: (IOVDD − DGND)/6+ > + 23: (IOVDD − DGND)/6- > + 24: (ALDO − AVSS)/6+ > + 25: (ALDO − AVSS)/6- > + 26: (DLDO − DGND)/6+ > + 27: (DLDO − DGND)/6- > + 28: V_MV_P > + 29: V_MV_M > + items: > + minimum: 0 > + maximum: 29 > + > + adi,reference-select: > + description: | > + Select the reference source to use when converting on the > + specific channel. Valid values are: > + 0: REFIN1(+)/REFIN1(−) > + 1: REFIN2(+)/REFIN2(−) > + 2: REFOUT/AVSS (Internal reference) > + 3: AVDD/AVSS > + If not specified, REFIN1 is used. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2, 3] > + default: 0 > + > + adi,excitation-pin-0: > + description: | > + Analog input to apply excitation current to while the channel > + is active. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 15 > + default: 0 > + > + adi,excitation-pin-1: > + description: | > + Analog input to apply excitation current to while this channel > + is active. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0 > + maximum: 15 > + default: 0 > + > + adi,excitation-current-0-nanoamps: > + description: | > + Excitation current in nanoamps to be applied to pin specified in > + adi,excitation-pin-0 while this channel is active. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] > + default: 0 > + > + adi,excitation-current-1-nanoamps: > + description: | > + Excitation current in nanoamps to be applied to pin specified in > + adi,excitation-pin-1 while this channel is active. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] > + default: 0 > + > + adi,burnout-current-nanoamps: > + description: | > + Burnout current in nanoamps to be applied for this channel. > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 500, 2000, 4000] > + default: 0 > + > + adi,buffered-positive: > + description: Enable buffered mode for positive input. > + type: boolean > + > + adi,buffered-negative: > + description: Enable buffered mode for negative input. > + type: boolean > + > + required: > + - reg > + - diff-channels > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,ad4130-8-24-wlcsp"; > + reg = <0>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + spi-max-frequency = <5000000>; > + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio>; > + > + channel@0 { > + reg = <0>; > + > + adi,reference-select = <2>; > + > + /* AIN8, AIN9 */ > + diff-channels = <8 9>; > + }; > + > + channel@1 { > + reg = <1>; > + > + adi,reference-select = <2>; > + > + /* AIN10, AIN11 */ > + diff-channels = <10 11>; > + }; > + > + channel@2 { > + reg = <2>; > + > + adi,reference-select = <2>; > + > + /* Temperature Sensor, DGND */ > + diff-channels = <16 19>; > + }; > + > + channel@3 { > + reg = <3>; > + > + adi,reference-select = <2>; > + > + /* Internal reference, DGND */ > + diff-channels = <18 19>; > + }; > + > + channel@4 { > + reg = <4>; > + > + adi,reference-select = <2>; > + > + /* DGND, DGND */ > + diff-channels = <19 19>; > + }; > + }; > + }; > -- > 2.35.3 > >
