Re: [PATCH 1/3] iio: adc: sun4i-gpadc-iio: no temp sensor on R40

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 22 Nov 2021 10:11:32 +0100
Maxime Ripard <maxime@xxxxxxxxxx> wrote:

> On Fri, Nov 19, 2021 at 10:14:54PM +0300, Evgeny Boger wrote:
> > R40 SoC has touchscreen controller also serving as general-purpose ADC.
> > The hardware is very similar to A31, except that R40 has separate
> > calibrated thermal sensor IP (handled by sun8i_thermal).
> > 
> > Despite the temperature sensor in the RTP is never mentioned in
> > the R40 family user manuals, it appears to be working. However,
> > it's not very useful as it lacks calibration data and there is another
> > fully functioning temperature sensor anyway.
> > 
> > This patch disables the temperature sensor in RTP/GPADC IP on R40.
> > 
> > The reason for disabling the temperature sensor is that the IP
> > needs to be switched back and forth between RTP and GPADC modes for
> > temperature measurements. Not only this introduces delays, but it also
> > disturbs external circuitry by injecting current into ADC inputs.
> > 
> > Signed-off-by: Evgeny Boger <boger@xxxxxxxxxxxxxx>  
> 
> Acked-by: Maxime Ripard <maxime@xxxxxxxxxx>

+Cc linux-iio@xxxxxxxxxxxxxxx

I'm fine with this and assuming Lee is happy to pick it up + send
me an immutable branch in case anything crosses with it this cycle..

Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Thanks,

Jonathan

> 
> Maxime
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux