Re: [PATCH 28/28] iio: adc: rcar-gyroadc: Use pm_runtime_resume_and_get() and check in probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 12 May 2021 17:01:40 +0200
Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> wrote:

> Em Sun,  9 May 2021 12:33:54 +0100
> Jonathan Cameron <jic23@xxxxxxxxxx> escreveu:
> 
> > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > 
> > 1 instance found using coccicheck script under review at:
> > https://lore.kernel.org/lkml/20210427141946.2478411-1-Julia.Lawall@xxxxxxxx/
> > The other instance changed did not check for failure of the
> > pm_runtime_get_sync() so that is added.
> > 
> > Note the remaining pm_runtime_get_sync() call is left alone because it
> > is not obvious what to do on failure to power up in remove()
> > 
> > This is a prequel to taking a closer look at the runtime pm in IIO drivers
> > in general.
> > 
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > Cc: Marek Vasut <marek.vasut@xxxxxxxxx>  
> 
> LGTM.
> 
> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>

Applied. Thanks,

Jonathan

> 
> > ---
> >  drivers/iio/adc/rcar-gyroadc.c | 15 +++++++--------
> >  1 file changed, 7 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
> > index 9f38cf3c7dc2..a48895046408 100644
> > --- a/drivers/iio/adc/rcar-gyroadc.c
> > +++ b/drivers/iio/adc/rcar-gyroadc.c
> > @@ -162,18 +162,13 @@ static const struct iio_chan_spec rcar_gyroadc_iio_channels_3[] = {
> >  static int rcar_gyroadc_set_power(struct rcar_gyroadc *priv, bool on)
> >  {
> >  	struct device *dev = priv->dev;
> > -	int ret;
> >  
> >  	if (on) {
> > -		ret = pm_runtime_get_sync(dev);
> > -		if (ret < 0)
> > -			pm_runtime_put_noidle(dev);
> > +		return pm_runtime_resume_and_get(dev);
> >  	} else {
> >  		pm_runtime_mark_last_busy(dev);
> > -		ret = pm_runtime_put_autosuspend(dev);
> > +		return pm_runtime_put_autosuspend(dev);
> >  	}
> > -
> > -	return ret;
> >  }
> >  
> >  static int rcar_gyroadc_read_raw(struct iio_dev *indio_dev,
> > @@ -535,7 +530,10 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
> >  	pm_runtime_use_autosuspend(dev);
> >  	pm_runtime_enable(dev);
> >  
> > -	pm_runtime_get_sync(dev);
> > +	ret = pm_runtime_resume_and_get(dev);
> > +	if (ret)
> > +		goto err_power_up;
> > +
> >  	rcar_gyroadc_hw_init(priv);
> >  	rcar_gyroadc_hw_start(priv);
> >  
> > @@ -552,6 +550,7 @@ static int rcar_gyroadc_probe(struct platform_device *pdev)
> >  err_iio_device_register:
> >  	rcar_gyroadc_hw_stop(priv);
> >  	pm_runtime_put_sync(dev);
> > +err_power_up:
> >  	pm_runtime_disable(dev);
> >  	pm_runtime_set_suspended(dev);
> >  	clk_disable_unprepare(priv->clk);  
> 
> 
> 
> Thanks,
> Mauro




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux