With the devm_ad_sd_setup_buffer_and_trigger() helper, it's a bit easier now to convert the probe of the AD7780 driver to use device-managed functions. Only the regulator disable requires a devm_add_action_or_reset() callback. This change does that, cleaning up the driver a bit. Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx> --- drivers/iio/adc/ad7780.c | 38 ++++++++++---------------------------- 1 file changed, 10 insertions(+), 28 deletions(-) diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c index 42e7e8e595d1..42bb952f4738 100644 --- a/drivers/iio/adc/ad7780.c +++ b/drivers/iio/adc/ad7780.c @@ -300,6 +300,11 @@ static int ad7780_init_gpios(struct device *dev, struct ad7780_state *st) return 0; } +static void ad7780_reg_disable(void *reg) +{ + regulator_disable(reg); +} + static int ad7780_probe(struct spi_device *spi) { struct ad7780_state *st; @@ -318,8 +323,6 @@ static int ad7780_probe(struct spi_device *spi) st->chip_info = &ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data]; - spi_set_drvdata(spi, indio_dev); - indio_dev->name = spi_get_device_id(spi)->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = &st->chip_info->channel; @@ -340,35 +343,15 @@ static int ad7780_probe(struct spi_device *spi) return ret; } - ret = ad_sd_setup_buffer_and_trigger(indio_dev); + ret = devm_add_action_or_reset(&spi->dev, ad7780_reg_disable, st->reg); if (ret) - goto error_disable_reg; + return ret; - ret = iio_device_register(indio_dev); + ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev); if (ret) - goto error_cleanup_buffer_and_trigger; - - return 0; - -error_cleanup_buffer_and_trigger: - ad_sd_cleanup_buffer_and_trigger(indio_dev); -error_disable_reg: - regulator_disable(st->reg); - - return ret; -} - -static int ad7780_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct ad7780_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - ad_sd_cleanup_buffer_and_trigger(indio_dev); - - regulator_disable(st->reg); + return ret; - return 0; + return devm_iio_device_register(&spi->dev, indio_dev); } static const struct spi_device_id ad7780_id[] = { @@ -385,7 +368,6 @@ static struct spi_driver ad7780_driver = { .name = "ad7780", }, .probe = ad7780_probe, - .remove = ad7780_remove, .id_table = ad7780_id, }; module_spi_driver(ad7780_driver); -- 2.31.1