Well, for lack of a better title that's what this series does. It merges Jonathan's patches from: * https://lore.kernel.org/linux-iio/20210508182319.488551-1-jic23@xxxxxxxxxx/ Patch 3/3 was a polished a bit with my comments from that review and also to use the devm_ad_sd_setup_buffer_and_trigger() function. * https://lore.kernel.org/linux-iio/20210509114118.660422-1-jic23@xxxxxxxxxx/ Added only to base the conversion to devm_ The AD Sigma Delta family of ADC drivers share a lot of the logic in the ad_sigma_delta lib-driver. This set introduces a devm_ad_sd_setup_buffer_and_trigger() call, which aims to replace the 'ad_sd_{setup,cleanup}_buffer_and_trigger()' pair. This helps with converting the AD7780, AD7791, AD7793 and AD7192 drivers use be fully converted to device-managed functions. Changelog v2 -> v3: * https://lore.kernel.org/linux-iio/20210511071831.576145-1-aardelean@xxxxxxxxxxx/ * patch 'iio: adc: ad7192: handle zero Avdd regulator value as error' is now 'iio: adc: ad7192: handle zero Avdd regulator value' essentially just doing a simple 'if (voltage_uv >= 0)' check now Changelog v1 -> v2: * https://lore.kernel.org/linux-iio/20210510125523.1271237-1-aardelean@xxxxxxxxxxx/ * add my S-o-b tags on all patches; with @deviqon.com email - Note: I'm a little unsure about the correctness of these tags; there are a few mixed-in, with Reviewed-by & Signed-off-by; I'm fine if Jonathan tweaks these as needed; * added patch 'iio: adc: ad7192: handle zero Avdd regulator value as error' * all Fixes patches should be now at the beginning of the series Alexandru Ardelean (8): iio: adc: ad7192: handle zero Avdd regulator value iio: adc: ad_sigma_delta: introduct devm_ad_sd_setup_buffer_and_trigger() iio: adc: ad7793: convert to device-managed functions iio: adc: ad7791: convert to device-managed functions iio: adc: ad7780: convert to device-managed functions iio: adc: ad7192: use devm_clk_get_optional() for mclk iio: adc: ad7192: convert to device-managed functions iio: adc: ad_sigma_delta: remove ad_sd_{setup,cleanup}_buffer_and_trigger() Jonathan Cameron (4): iio: adc: ad7124: Fix missbalanced regulator enable / disable on error. iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers iio: adc: ad7192: Avoid disabling a clock that was never enabled. iio: adc: ad7124: Use devm_ managed calls for all of probe() + drop remove() drivers/iio/adc/ad7124.c | 84 ++++++++++------------- drivers/iio/adc/ad7192.c | 92 +++++++++++--------------- drivers/iio/adc/ad7780.c | 38 +++-------- drivers/iio/adc/ad7791.c | 44 ++++-------- drivers/iio/adc/ad7793.c | 53 +++++---------- drivers/iio/adc/ad_sigma_delta.c | 82 ++++++++--------------- include/linux/iio/adc/ad_sigma_delta.h | 4 +- 7 files changed, 142 insertions(+), 255 deletions(-) -- 2.31.1
