Em Sun, 9 May 2021 12:33:50 +0100 Jonathan Cameron <jic23@xxxxxxxxxx> escreveu: > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Converts from using pm_runtime_get_sync() with no error handling over > to pm_runtime_resume_and_get() which will ensure we don't end up > holding a reference. Ensure this error return is then handled at > calls to mlx90614_power_get(). These are all direct returns. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> LGTM. Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> > --- > drivers/iio/temperature/mlx90614.c | 25 ++++++++++++++++++++----- > 1 file changed, 20 insertions(+), 5 deletions(-) > > diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c > index ef0fec94d269..afcb10ea7c44 100644 > --- a/drivers/iio/temperature/mlx90614.c > +++ b/drivers/iio/temperature/mlx90614.c > @@ -176,11 +176,14 @@ static inline s32 mlx90614_iir_search(const struct i2c_client *client, > static int mlx90614_power_get(struct mlx90614_data *data, bool startup) > { > unsigned long now; > + int ret; > > if (!data->wakeup_gpio) > return 0; > > - pm_runtime_get_sync(&data->client->dev); > + ret = pm_runtime_resume_and_get(&data->client->dev); > + if (ret < 0) > + return ret; > > if (startup) { > now = jiffies; > @@ -267,7 +270,10 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev, > *val = MLX90614_CONST_SCALE; > return IIO_VAL_INT; > case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */ > - mlx90614_power_get(data, false); > + ret = mlx90614_power_get(data, false); > + if (ret < 0) > + return ret; > + > mutex_lock(&data->lock); > ret = i2c_smbus_read_word_data(data->client, > MLX90614_EMISSIVITY); > @@ -287,7 +293,10 @@ static int mlx90614_read_raw(struct iio_dev *indio_dev, > return IIO_VAL_INT_PLUS_NANO; > case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR setting with > FIR = 1024 */ > - mlx90614_power_get(data, false); > + ret = mlx90614_power_get(data, false); > + if (ret < 0) > + return ret; > + > mutex_lock(&data->lock); > ret = i2c_smbus_read_word_data(data->client, MLX90614_CONFIG); > mutex_unlock(&data->lock); > @@ -319,7 +328,10 @@ static int mlx90614_write_raw(struct iio_dev *indio_dev, > val = val * MLX90614_CONST_RAW_EMISSIVITY_MAX + > val2 / MLX90614_CONST_EMISSIVITY_RESOLUTION; > > - mlx90614_power_get(data, false); > + ret = mlx90614_power_get(data, false); > + if (ret < 0) > + return ret; > + > mutex_lock(&data->lock); > ret = mlx90614_write_word(data->client, MLX90614_EMISSIVITY, > val); > @@ -331,7 +343,10 @@ static int mlx90614_write_raw(struct iio_dev *indio_dev, > if (val < 0 || val2 < 0) > return -EINVAL; > > - mlx90614_power_get(data, false); > + ret = mlx90614_power_get(data, false); > + if (ret < 0) > + return ret; > + > mutex_lock(&data->lock); > ret = mlx90614_iir_search(data->client, > val * 100 + val2 / 10000); Thanks, Mauro