From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Error paths in read_raw() and write_raw() callbacks failed to perform and
type of runtime pm put(). Remove called pm_runtime_put_noidle()
but there is no equivalent get (this is safe because the reference
count is protected against going below zero, but it is misleading.
Whilst here use pm_runtime_resume_and_get() to replace boilerplate.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
drivers/iio/light/tsl2583.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
index 0f787bfc88fc..1f4ad4047a86 100644
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -636,9 +636,7 @@ static int tsl2583_set_pm_runtime_busy(struct tsl2583_chip *chip, bool on)
int ret;
if (on) {
- ret = pm_runtime_get_sync(&chip->client->dev);
- if (ret < 0)
- pm_runtime_put_noidle(&chip->client->dev);
+ ret = pm_runtime_resume_and_get(&chip->client->dev);
} else {
pm_runtime_mark_last_busy(&chip->client->dev);
ret = pm_runtime_put_autosuspend(&chip->client->dev);
@@ -721,8 +719,10 @@ static int tsl2583_read_raw(struct iio_dev *indio_dev,
read_done:
mutex_unlock(&chip->als_mutex);
- if (ret < 0)
+ if (ret < 0) {
+ tsl2583_set_pm_runtime_busy(chip, false);
return ret;
+ }
/*
* Preserve the ret variable if the call to
@@ -783,8 +783,10 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
mutex_unlock(&chip->als_mutex);
- if (ret < 0)
+ if (ret < 0) {
+ tsl2583_set_pm_runtime_busy(chip, false);
return ret;
+ }
ret = tsl2583_set_pm_runtime_busy(chip, false);
if (ret < 0)
@@ -872,7 +874,6 @@ static int tsl2583_remove(struct i2c_client *client)
pm_runtime_disable(&client->dev);
pm_runtime_set_suspended(&client->dev);
- pm_runtime_put_noidle(&client->dev);
return tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
}
--
2.31.1
