Re: [PATCH v2 1/2] iio:adc:ad7476: Handle the different regulators used by various parts.

[Lars-Peter Clausen <lars@xxxxxxxxxx>]

On 4/5/21 6:23 PM, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> Not all of the parts supported by this driver use single supply.
> Hence we add chip_info fields to say what additional supplies exist
> and in the case of vref, ensure that is used for the reference voltage
> rather than vcc.
>
> One corner case is the ad7091r which has an internal reference that
> can be over-driven by an external reference connected on the vref pin.
> To handle that force_ext_vref is introduced and set if an optional
> vref regulator is present.
>
> Tested using really simple QEMU model and some fixed regulators.
>
> The devm_add_action_or_reset() callback is changed to take the
> regulator as it's parameter so we can use one callback for all the
> different regulators without having to store pointers to them in
> the iio_priv() structure.
>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Cc: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> ---
>   drivers/iio/adc/ad7476.c | 108 +++++++++++++++++++++++++++++++++------
>   1 file changed, 93 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c
> index 9e9ff07cf972..6867e96e3eda 100644
> --- a/drivers/iio/adc/ad7476.c
> +++ b/drivers/iio/adc/ad7476.c
> @@ -32,12 +32,15 @@ struct ad7476_chip_info {
>   	/* channels used when convst gpio is defined */
>   	struct iio_chan_spec		convst_channel[2];
>   	void (*reset)(struct ad7476_state *);
> +	bool				has_vref;
> +	bool				has_vdrive;
>   };
>   
>   struct ad7476_state {
>   	struct spi_device		*spi;
>   	const struct ad7476_chip_info	*chip_info;
> -	struct regulator		*reg;
> +	struct regulator		*ref_reg;
> +	bool				force_ext_vref;
>   	struct gpio_desc		*convst_gpio;
>   	struct spi_transfer		xfer;
>   	struct spi_message		msg;
> @@ -52,13 +55,17 @@ struct ad7476_state {
>   };
>   
>   enum ad7476_supported_device_ids {
> +	ID_AD7091,
>   	ID_AD7091R,
> +	ID_AD7273,
> +	ID_AD7274,
>   	ID_AD7276,
>   	ID_AD7277,
>   	ID_AD7278,
>   	ID_AD7466,
>   	ID_AD7467,
>   	ID_AD7468,
> +	ID_AD7475,
>   	ID_AD7495,
>   	ID_AD7940,
>   	ID_ADC081S,
> @@ -145,8 +152,8 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
>   			GENMASK(st->chip_info->channel[0].scan_type.realbits - 1, 0);
>   		return IIO_VAL_INT;
>   	case IIO_CHAN_INFO_SCALE:
> -		if (!st->chip_info->int_vref_uv) {
> -			scale_uv = regulator_get_voltage(st->reg);
> +		if (!st->chip_info->int_vref_uv || st->force_ext_vref) {
Set set->reg_reg to NULL when not present and check for that instead of 
adding force_ext_vref?
> +			scale_uv = regulator_get_voltage(st->ref_reg);
>   			if (scale_uv < 0)
>   				return scale_uv;
>   		} else {
> @@ -187,13 +194,32 @@ static int ad7476_read_raw(struct iio_dev *indio_dev,
>   		BIT(IIO_CHAN_INFO_RAW))
>   
>
>   static int ad7476_probe(struct spi_device *spi)
>   {
> [...]
> +	/* Either vcc or vref (below) as appropriate */
> +	st->ref_reg = reg;
> +
> +	if (st->chip_info->has_vref) {
> +
> +		/* If a device has an internal reference vref is optional */
> +		if (st->chip_info->int_vref_uv) {
> +			reg = devm_regulator_get_optional(&spi->dev, "vref");

I think we need to distinguish between -ENODEV and other errors, if not 
only to handle EPROBE_DEFER.

[...]