From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> As iio_poll_trigger() is safe against spurious interrupts when the trigger is not enabled, this is not a fix despite looking like a race. It is nice to simplify the code however so the interrupt is never enabled in the first place. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> --- drivers/iio/adc/ad7766.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/iio/adc/ad7766.c b/drivers/iio/adc/ad7766.c index 829a3426f235..1e41759f3ee5 100644 --- a/drivers/iio/adc/ad7766.c +++ b/drivers/iio/adc/ad7766.c @@ -255,18 +255,17 @@ static int ad7766_probe(struct spi_device *spi) ad7766->trig->ops = &ad7766_trigger_ops; iio_trigger_set_drvdata(ad7766->trig, ad7766); - ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, - IRQF_TRIGGER_FALLING, dev_name(&spi->dev), - ad7766->trig); - if (ret < 0) - return ret; - /* * The device generates interrupts as long as it is powered up. * Some platforms might not allow the option to power it down so - * disable the interrupt to avoid extra load on the system + * don't enable the interrupt to avoid extra load on the system */ - disable_irq(spi->irq); + ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq, + IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN, + dev_name(&spi->dev), + ad7766->trig); + if (ret < 0) + return ret; ret = devm_iio_trigger_register(&spi->dev, ad7766->trig); if (ret) -- 2.31.1
