Comments inlined below.
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@xxxxxxxxxxxxxxxxx
W: www.topicproducts.com
Please consider the environment before printing this e-mail
On 20-01-2021 19:50, Jonathan Cameron wrote:
On Tue, 19 Jan 2021 13:46:21 +0100
Mike Looijmans <mike.looijmans@xxxxxxxx> wrote:
This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
the accelerometer part.
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
---
Changes in v6:
I't been almost a year since the last commit, sorry...
No problem. Happens to us all sometimes!
One thing inline below.
Thanks,
Jonathan
Fixed the yaml errors
Add interrupt, vdd and vddio properties
Changes in v5:
submit together with driver code as patch series
Changes in v2:
convert to yaml format
.../bindings/iio/accel/bosch,bmi088.yaml | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
new file mode 100644
index 000000000000..459b9969fd12
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI088 IMU accelerometer part
+
+maintainers:
+ - Mike Looijmans <mike.looijmans@xxxxxxxx>
+
+description: |
+ Acceleration part of the IMU sensor with an SPI interface
+ Specifications about the sensor can be found at:
+ https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
+
+properties:
+ compatible:
+ enum:
+ - bosch,bmi088_accel
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ vddio-supply: true
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ description: |
+ Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
+ The first interrupt listed must be the one connected to the INT1 pin, the
+ second must be the one connected to the INT2 pin.
What if the board only has the INT2 pin connected?
That's looks to be a valid hardware configuration.
I'd suggest using interrupt-names to cover this.
Yeah makes sense. The pins have the same functionality, so either one will do.
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bmi088_accel@1 {
+ compatible = "bosch,bmi088_accel";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+...
