Re: [PATCH v6 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 19, 2021 at 01:46:21PM +0100, Mike Looijmans wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> 
> ---
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 55 +++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> new file mode 100644
> index 000000000000..459b9969fd12
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMI088 IMU accelerometer part
> +
> +maintainers:
> +  - Mike Looijmans <mike.looijmans@xxxxxxxx>
> +
> +description: |
> +  Acceleration part of the IMU sensor with an SPI interface
> +  Specifications about the sensor can be found at:
> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bmi088_accel

bosch,bmi088-accel

> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vddio-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> +      The first interrupt listed must be the one connected to the INT1 pin, the
> +      second must be the one connected to the INT2 pin.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      bmi088_accel@1 {
> +        compatible = "bosch,bmi088_accel";
> +        reg = <1>;
> +        spi-max-frequency = <10000000>;
> +        interrupt-parent = <&gpio6>;
> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +      };
> +    };
> +...
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux