On Tue, 8 Dec 2020 15:19:55 +0200 Cristian Pop <cristian.pop@xxxxxxxxxx> wrote: > This adds device tree bindings for the AD5766 DAC. > > Signed-off-by: Cristian Pop <cristian.pop@xxxxxxxxxx> > --- > Changes in v3: > - Fix errors > .../bindings/iio/dac/adi,ad5766.yaml | 58 +++++++++++++++++++ > 1 file changed, 58 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml > > diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml > new file mode 100644 > index 000000000000..25ec5bc0a6c6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml > @@ -0,0 +1,58 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2020 Analog Devices Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/dac/adi,ad5766.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD5766 DAC device driver > + > +maintainers: > + - Cristian Pop <cristian.pop@xxxxxxxxxx> > + > +description: | > + Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be > + found here: > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad5766-5767.pdf > + > +properties: > + compatible: > + enum: > + - adi,ad5766 > + - adi,ad5767 > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 1000000 > + > + spi-cpol: true > + > + reset-gpios: > + description: GPIO spec for the RESET pin. If specified, it will be > + asserted during driver probe. > + maxItems: 1 Given we've recently been bitten by this in another driver I took a look at the datasheet. This is an active low pin (not reset) so document it as such and set logic as appropriate in the driver. > + > +required: > + - compatible > + - reg > + - spi-max-frequency > + - spi-cpol > + > +additionalProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ad5766@0 { > + compatible = "adi,ad5766"; > + reg = <0>; > + spi-cpol; > + spi-max-frequency = <1000000>; > + reset-gpios = <&gpio 22 0>; > + }; > + };