I need to configure various settings such as thresholds, gain factors, etc. on this device. Some settings matter at boot, while others can wait for userspace to configure things. This patch series adds support to set these various bits in the registers of this device. Changes from v1 (https://lore.kernel.org/r/20200903221828.3657250-1-swboyd@xxxxxxxxxxxx) - A bunch more patches for userspace settings - Removed body thresholds as they're probably not used - Removed compensate common as it probably doesn't matter - Moved thresholds, gain factor, hysteresis, debounce to userspace Stephen Boyd (6): iio: sx9310: Support hardware gain factor iio: sx9310: Support setting proximity thresholds iio: sx9310: Support setting hysteresis values iio: sx9310: Support setting debounce values dt-bindings: iio: sx9310: Add various settings as DT properties iio: sx9310: Set various settings from DT .../iio/proximity/semtech,sx9310.yaml | 61 ++ drivers/iio/proximity/sx9310.c | 524 +++++++++++++++++- 2 files changed, 579 insertions(+), 6 deletions(-) Cc: Daniel Campello <campello@xxxxxxxxxxxx> Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> Cc: Gwendal Grignou <gwendal@xxxxxxxxxxxx> Cc: Evan Green <evgreen@xxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: <devicetree@xxxxxxxxxxxxxxx> base-commit: 1bebdcb928eba880f3a119bacb8149216206958a -- Sent by a computer, using git, on the internet
