Re: [PATCH v2 20/20] dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 16 Sep 2020 11:33:31 +0100
Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> wrote:

> On Wed, 9 Sep 2020 18:59:46 +0100
> Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> 
> > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > 
> > This binding has a few corners that would have been done different today
> > but hopefully the yaml schema captures the constraints correctly.
> > 
> > The child node names are not constrained hence the fairly open regexp.
> > I've also documented the defaults for the two references that the
> > driver seems to use and copied the value descriptions from the header
> > because I think they should be in the dt-binding itself.
> > 
> > This is part of a general effort to convert all the IIO bindings
> > over to yaml
> > 
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > Cc: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>  
> 
> Update Markus' email address.  If Markus is fine with it, I'll update in
> the maintainers line in the binding as well.
> Hope this is the same Markus Pargmann!
> 
> This address is from a 2016 thread, so may well bounce as well :(

Bounced as well.

Shawn / Sascha any suggestions for a suitable maintainer on this, or
a more recent address for Markus?

If not I'll pick it up I'll put myself in there and we can update it
when someone steps up in then future.

Jonathan

> 
> 
> Thanks,
> 
> Jonathan
> 
> 
> > ---
> >  .../bindings/iio/adc/fsl,imx25-gcq.txt        |  57 --------
> >  .../bindings/iio/adc/fsl,imx25-gcq.yaml       | 129 ++++++++++++++++++
> >  2 files changed, 129 insertions(+), 57 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
> > deleted file mode 100644
> > index eebdcec3dab5..000000000000
> > --- a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt
> > +++ /dev/null
> > @@ -1,57 +0,0 @@
> > -Freescale i.MX25 ADC GCQ device
> > -
> > -This is a generic conversion queue device that can convert any of the
> > -analog inputs using the ADC unit of the i.MX25.
> > -
> > -Required properties:
> > - - compatible: Should be "fsl,imx25-gcq".
> > - - reg: Should be the register range of the module.
> > - - interrupts: Should be the interrupt number of the module.
> > -   Typically this is <1>.
> > - - #address-cells: Should be <1> (setting for the subnodes)
> > - - #size-cells: Should be <0> (setting for the subnodes)
> > -
> > -Optional properties:
> > - - vref-ext-supply: The regulator supplying the ADC reference voltage.
> > -   Required when at least one subnode uses the this reference.
> > - - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP.
> > -   Required when at least one subnode uses this reference.
> > - - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP.
> > -   Required when at least one subnode uses this reference.
> > -
> > -Sub-nodes:
> > -Optionally you can define subnodes which define the reference voltage
> > -for the analog inputs.
> > -
> > -Required properties for subnodes:
> > - - reg: Should be the number of the analog input.
> > -     0: xp
> > -     1: yp
> > -     2: xn
> > -     3: yn
> > -     4: wiper
> > -     5: inaux0
> > -     6: inaux1
> > -     7: inaux2
> > -Optional properties for subnodes:
> > - - fsl,adc-refp: specifies the positive reference input as defined in
> > -     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> > - - fsl,adc-refn: specifies the negative reference input as defined in
> > -     <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> > -
> > -Example:
> > -
> > -	adc: adc@50030800 {
> > -		compatible = "fsl,imx25-gcq";
> > -		reg = <0x50030800 0x60>;
> > -		interrupt-parent = <&tscadc>;
> > -		interrupts = <1>;
> > -		#address-cells = <1>;
> > -		#size-cells = <0>;
> > -
> > -		inaux@5 {
> > -			reg = <5>;
> > -			fsl,adc-refp = <MX25_ADC_REFP_INT>;
> > -			fsl,adc-refn = <MX25_ADC_REFN_NGND>;
> > -		};
> > -	};
> > diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
> > new file mode 100644
> > index 000000000000..6c4e3ef0862c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.yaml
> > @@ -0,0 +1,129 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/fsl,imx25-gcq.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale ADC GCQ device
> > +
> > +description:
> > +  This is a generic conversion queue device that can convert any of the
> > +  analog inputs using the ADC unit of the i.MX25.
> > +
> > +maintainers:
> > +  - Markus Pargmann <mpa@xxxxxxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    const: fsl,imx25-gcq
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  vref-ext-supply:
> > +    description:
> > +      The regulator supplying the ADC reference voltage.
> > +      Required when at least one subnode uses the this reference.
> > +
> > +  vref-xp-supply:
> > +    description:
> > +      The regulator supplying the ADC reference voltage on pin XP.
> > +      Required when at least one subnode uses this reference.
> > +
> > +  vref-yp-supply:
> > +    description:
> > +      The regulator supplying the ADC reference voltage on pin YP.
> > +      Required when at least one subnode uses this reference.
> > +
> > +  "#io-channel-cells":
> > +    const: 1
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +
> > +patternProperties:
> > +  "[a-z][a-z0-9]+@[0-9a-f]+$":
> > +    type: object
> > +    description:
> > +      Child nodes used to define the reference voltages used for each channel
> > +
> > +    properties:
> > +      reg:
> > +        description: |
> > +          Number of the analog input.
> > +          0: xp
> > +          1: yp
> > +          2: xn
> > +          3: yn
> > +          4: wiper
> > +          5: inaux0
> > +          6: inaux1
> > +          7: inaux2
> > +        items:
> > +          - minimum: 0
> > +            maximum: 7
> > +
> > +      fsl,adc-refp:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: |
> > +          Specifies the positive reference input as defined in
> > +          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> > +          0: YP voltage reference
> > +          1: XP voltage reference
> > +          2: External voltage reference
> > +          3: Internal voltage reference (default)
> > +        minimum: 0
> > +        maximum: 3
> > +
> > +      fsl,adc-refn:
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +        description: |
> > +          Specifies the negative reference input as defined in
> > +          <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> > +          0: XN ground reference
> > +          1: YN ground reference
> > +          2: Internal ground reference
> > +          3: External ground reference (default)
> > +        minimum: 0
> > +        maximum: 3
> > +
> > +    required:
> > +      - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/iio/adc/fsl-imx25-gcq.h>
> > +    soc {
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        adc@50030800 {
> > +            compatible = "fsl,imx25-gcq";
> > +            reg = <0x50030800 0x60>;
> > +            interrupt-parent = <&tscadc>;
> > +            interrupts = <1>;
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            inaux@5 {
> > +                reg = <5>;
> > +                fsl,adc-refp = <MX25_ADC_REFP_INT>;
> > +                fsl,adc-refn = <MX25_ADC_REFN_NGND>;
> > +            };
> > +        };
> > +    };
> > +...  
> 





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux