On Thu, Sep 03, 2020 at 03:18:28PM -0700, Stephen Boyd wrote: > We need to set various bits in the hardware registers for this device to > operate properly depending on how it is installed. Add a handful of DT > properties to configure these things. > > Cc: Daniel Campello <campello@xxxxxxxxxxxx> > Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> > Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: <devicetree@xxxxxxxxxxxxxxx> > Cc: Douglas Anderson <dianders@xxxxxxxxxxxx> > Cc: Gwendal Grignou <gwendal@xxxxxxxxxxxx> > Cc: Evan Green <evgreen@xxxxxxxxxxxx> > Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > --- > > I haven't written any code to handle these properties yet. I'd rather do > that once the binding patch is reviewed. Patch based on iio.git testing > branch. > > .../iio/proximity/semtech,sx9310.yaml | 182 ++++++++++++++++++ > 1 file changed, 182 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml > index 5739074d3592..e74b81483c14 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml > @@ -40,6 +40,169 @@ properties: > "#io-channel-cells": > const: 1 > > + semtech,cs0-ground: > + description: Indicates the CS0 sensor is connected to ground. > + type: boolean > + > + semtech,combined-sensors: > + allOf: > + - $ref: /schemas/types.yaml#definitions/uint32 > + - enum: [0, 1, 2, 3] > + default: 0 > + description: > + Which sensors are combined. 0 for CS3, 1 for CS0+CS1, 2 for CS1+CS2, > + and 3 for all sensors. > + > + semtech,cs0-gain-factor: > + allOf: > + - $ref: /schemas/types.yaml#definitions/uint32 > + - enum: [1, 2, 4, 8] > + default: 1 > + description: > + Gain factor for CS0 (and combined if any) sensor. > + > + semtech,cs1-gain-factor: > + allOf: > + - $ref: /schemas/types.yaml#definitions/uint32 > + - enum: [1, 2, 4, 8] Now that everyone is trained on 'allOf', you can drop it. json-schema draft8 changed this behavior. Rob
