On Thu, 10 Sep 2020 16:51:26 +0300
Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Thu, Sep 10, 2020 at 3:27 PM Nishant Malpani
> <nish.malpani25@xxxxxxxxx> wrote:
> >
> > Make use of devm_add_action_or_reset() hook to switch device into STANDBY
> > mode during standard resource unwinding. The patch includes a helper
> > function, in the form of adxrs290_set_mode(), to realise driving the
> > device into STANDBY mode.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Great thanks.
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to poke at it.
Thanks,
Jonathan
>
> > Signed-off-by: Nishant Malpani <nish.malpani25@xxxxxxxxx>
> > ---
> > drivers/iio/gyro/adxrs290.c | 61 +++++++++++++++++++++++++++++++++++--
> > 1 file changed, 58 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c
> > index ff989536d2fb..2864eb443957 100644
> > --- a/drivers/iio/gyro/adxrs290.c
> > +++ b/drivers/iio/gyro/adxrs290.c
> > @@ -192,15 +192,70 @@ static int adxrs290_set_filter_freq(struct iio_dev *indio_dev,
> > return adxrs290_spi_write_reg(st->spi, ADXRS290_REG_FILTER, val);
> > }
> >
> > +static int adxrs290_set_mode(struct iio_dev *indio_dev, enum adxrs290_mode mode)
> > +{
> > + struct adxrs290_state *st = iio_priv(indio_dev);
> > + int val, ret;
> > +
> > + if (st->mode == mode)
> > + return 0;
> > +
> > + mutex_lock(&st->lock);
> > +
> > + ret = spi_w8r8(st->spi, ADXRS290_READ_REG(ADXRS290_REG_POWER_CTL));
> > + if (ret < 0)
> > + goto out_unlock;
> > +
> > + val = ret;
> > +
> > + switch (mode) {
> > + case ADXRS290_MODE_STANDBY:
> > + val &= ~ADXRS290_MEASUREMENT;
> > + break;
> > + case ADXRS290_MODE_MEASUREMENT:
> > + val |= ADXRS290_MEASUREMENT;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + goto out_unlock;
> > + }
> > +
> > + ret = adxrs290_spi_write_reg(st->spi, ADXRS290_REG_POWER_CTL, val);
> > + if (ret < 0) {
> > + dev_err(&st->spi->dev, "unable to set mode: %d\n", ret);
> > + goto out_unlock;
> > + }
> > +
> > + /* update cached mode */
> > + st->mode = mode;
> > +
> > +out_unlock:
> > + mutex_unlock(&st->lock);
> > + return ret;
> > +}
> > +
> > +static void adxrs290_chip_off_action(void *data)
> > +{
> > + struct iio_dev *indio_dev = data;
> > +
> > + adxrs290_set_mode(indio_dev, ADXRS290_MODE_STANDBY);
> > +}
> > +
> > static int adxrs290_initial_setup(struct iio_dev *indio_dev)
> > {
> > struct adxrs290_state *st = iio_priv(indio_dev);
> > + struct spi_device *spi = st->spi;
> > + int ret;
> > +
> > + ret = adxrs290_spi_write_reg(spi, ADXRS290_REG_POWER_CTL,
> > + ADXRS290_MEASUREMENT | ADXRS290_TSM);
> > + if (ret < 0)
> > + return ret;
> >
> > st->mode = ADXRS290_MODE_MEASUREMENT;
> >
> > - return adxrs290_spi_write_reg(st->spi,
> > - ADXRS290_REG_POWER_CTL,
> > - ADXRS290_MEASUREMENT | ADXRS290_TSM);
> > + return devm_add_action_or_reset(&spi->dev, adxrs290_chip_off_action,
> > + indio_dev);
> > }
> >
> > static int adxrs290_read_raw(struct iio_dev *indio_dev,
> > --
> > 2.20.1
> >
>
>
