From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> A simple conversion of this freescale ADC binding from txt to yaml. For maintainer I went with Fugang Duan as the original author of the binding. Would be great to have confirmation of this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Cc: Fugang Duan <B38611@xxxxxxxxxxxxx> Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- .../bindings/iio/adc/fsl,vf610-adc.yaml | 81 +++++++++++++++++++ .../devicetree/bindings/iio/adc/vf610-adc.txt | 36 --------- 2 files changed, 81 insertions(+), 36 deletions(-) diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml new file mode 100644 index 000000000000..99b6b55fd0a3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/fsl,vf610-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC found on Freescale vf610 and similar SoCs + +maintainers: + - Fugang Duan <B38611@xxxxxxxxxxxxx> + +description: + ADCs found on vf610/i.MX6slx and upward SoCs from Freescale. + +properties: + compatible: + const: fsl,vf610-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: ADC source clock (ipg clock) + maxItems: 1 + + clock-names: + const: adc + + vref-supply: + description: ADC reference voltage supply. + + fsl,adck-max-frequency: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + description: | + Maximum frequencies from datasheet operating requirements. + Three values necessary to cover the 3 conversion modes. + * Frequency in normal mode (ADLPC=0, ADHSC=0) + * Frequency in high-speed mode (ADLPC=0, ADHSC=1) + * Frequency in low-power mode (ADLPC=1, ADHSC=0) + + min-sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/vf610-clock.h> + adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + interrupts = <0 53 0x04>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; + vref-supply = <®_vcc_3v3_mcu>; + min-sample-time = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt deleted file mode 100644 index 1aad0514e647..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale vf610 Analog to Digital Converter bindings - -The devicetree bindings are for the new ADC driver written for -vf610/i.MX6slx and upward SoCs from Freescale. - -Required properties: -- compatible: Should contain "fsl,vf610-adc" -- reg: Offset and length of the register set for the device -- interrupts: Should contain the interrupt for the device -- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. -- clock-names: Must contain "adc", matching entry in the clocks property. -- vref-supply: The regulator supply ADC reference voltage. - -Recommended properties: -- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating - requirements. Three values are required, depending on conversion mode: - - Frequency in normal mode (ADLPC=0, ADHSC=0) - - Frequency in high-speed mode (ADLPC=0, ADHSC=1) - - Frequency in low-power mode (ADLPC=1, ADHSC=0) -- min-sample-time: Minimum sampling time in nanoseconds. This value has - to be chosen according to the conversion mode and the connected analog - source resistance (R_as) and capacitance (C_as). Refer the datasheet's - operating requirements. A safe default across a wide range of R_as and - C_as as well as conversion modes is 1000ns. - -Example: -adc0: adc@4003b000 { - compatible = "fsl,vf610-adc"; - reg = <0x4003b000 0x1000>; - interrupts = <0 53 0x04>; - clocks = <&clks VF610_CLK_ADC0>; - clock-names = "adc"; - fsl,adck-max-frequency = <30000000>, <40000000>, - <20000000>; - vref-supply = <®_vcc_3v3_mcu>; -}; -- 2.28.0
