The fixed regulators are kept under dedicated "regulators" node but this
causes multiple dtschema warnings:
regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
regulators: #size-cells:0:0: 0 is not one of [1, 2]
regulators: fixed-regulator@0:reg:0: [0] is too short
regulators: fixed-regulator@1:reg:0: [1] is too short
regulators: fixed-regulator@2:reg:0: [2] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/s5pv210-aquila.dts | 47 +++++++++++-----------------
1 file changed, 19 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 25d4ab4a52c5..28e9e81bb2d1 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -40,36 +40,27 @@
clock-frequency = <32768>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vtf_reg: fixed-regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "V_TF_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
+ vtf_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_TF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&mp05 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
- pda_reg: fixed-regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1.8V_PDA";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- reg = <1>;
- };
+ pda_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1.8V_PDA";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- bat_reg: fixed-regulator@2 {
- compatible = "regulator-fixed";
- regulator-name = "V_BAT";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- reg = <2>;
- };
+ bat_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_BAT";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
};
i2c_pmic: i2c-pmic {
--
2.17.1
