On Mon, Aug 24, 2020 at 8:54 AM William Sung <william.sung@xxxxxxxxxxxxxxxx> wrote: > > To use ad5593r more flexibly, we use the module parameter to setting the > channel modes dynamically whenever the module probe up. > Users can pass > the channel modes to the module parameter for allocating the > functionality of channels as desired. NAK. We have a sysfs interface. > For example: > * Use in the kernel command line: > Users can add the module parameter in the kernel command line such as > > "ad5593r.ch_mode_cmdline=88001122" > > "88001122" means the channel mode setting for each channel. The most > left side indicates the mode of channel 7, and the most right side > indicates the mode of channel 0. > > * Use when manually probe the module: > Similar to the kernel command line usage, users can enter > > "modprobe ad5593r ch_mode_probe=88001122" > > to start the ad5593r module with the desired channel mode setting. Again NAK, this basically should come from Device Tree or ACPI. -- With Best Regards, Andy Shevchenko
