The driver pretty much uses device managed functions. The only left-over is the iio_device_register() function, which also requires an action-or-reset hook to disable the regulator on the remove and error path. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> --- drivers/iio/frequency/ad9523.c | 60 +++++++++++++--------------------- 1 file changed, 22 insertions(+), 38 deletions(-) diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c index 334e1d779d6d..3d892d4f5f85 100644 --- a/drivers/iio/frequency/ad9523.c +++ b/drivers/iio/frequency/ad9523.c @@ -969,6 +969,13 @@ static int ad9523_setup(struct iio_dev *indio_dev) return 0; } +static void ad9523_reg_disable(void *data) +{ + struct regulator *reg = data; + + regulator_disable(reg); +} + static int ad9523_probe(struct spi_device *spi) { struct ad9523_platform_data *pdata = spi->dev.platform_data; @@ -994,21 +1001,22 @@ static int ad9523_probe(struct spi_device *spi) ret = regulator_enable(st->reg); if (ret) return ret; + + ret = devm_add_action_or_reset(&spi->dev, ad9523_reg_disable, + st->reg); + if (ret) + return ret; } st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_HIGH); - if (IS_ERR(st->pwrdown_gpio)) { - ret = PTR_ERR(st->pwrdown_gpio); - goto error_disable_reg; - } + if (IS_ERR(st->pwrdown_gpio)) + return PTR_ERR(st->pwrdown_gpio); st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(st->reset_gpio)) { - ret = PTR_ERR(st->reset_gpio); - goto error_disable_reg; - } + if (IS_ERR(st->reset_gpio)) + return PTR_ERR(st->reset_gpio); if (st->reset_gpio) { udelay(1); @@ -1017,10 +1025,8 @@ static int ad9523_probe(struct spi_device *spi) st->sync_gpio = devm_gpiod_get_optional(&spi->dev, "sync", GPIOD_OUT_HIGH); - if (IS_ERR(st->sync_gpio)) { - ret = PTR_ERR(st->sync_gpio); - goto error_disable_reg; - } + if (IS_ERR(st->sync_gpio)) + return PTR_ERR(st->sync_gpio); spi_set_drvdata(spi, indio_dev); st->spi = spi; @@ -1035,36 +1041,15 @@ static int ad9523_probe(struct spi_device *spi) ret = ad9523_setup(indio_dev); if (ret < 0) - goto error_disable_reg; - - ret = iio_device_register(indio_dev); - if (ret) - goto error_disable_reg; - - dev_info(&spi->dev, "probed %s\n", indio_dev->name); - - return 0; + return ret; -error_disable_reg: - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); + ret = devm_iio_device_register(&spi->dev, indio_dev); + if (ret == 0) + dev_info(&spi->dev, "probed %s\n", indio_dev->name); return ret; } -static int ad9523_remove(struct spi_device *spi) -{ - struct iio_dev *indio_dev = spi_get_drvdata(spi); - struct ad9523_state *st = iio_priv(indio_dev); - - iio_device_unregister(indio_dev); - - if (!IS_ERR(st->reg)) - regulator_disable(st->reg); - - return 0; -} - static const struct spi_device_id ad9523_id[] = { {"ad9523-1", 9523}, {} @@ -1076,7 +1061,6 @@ static struct spi_driver ad9523_driver = { .name = "ad9523", }, .probe = ad9523_probe, - .remove = ad9523_remove, .id_table = ad9523_id, }; module_spi_driver(ad9523_driver); -- 2.25.1