On Tue, 19 May 2020 09:50:58 +0200
Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx> wrote:
> Add vdd-supply and vddio-supply support.
> Add mount-matrix support.
>
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
A few minor comments inline.
> ---
> .../devicetree/bindings/iio/imu/bmi160.yaml | 21 +++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bmi160.yaml
> index 6b464ce5ed0b..5b13af7a209f 100644
> --- a/Documentation/devicetree/bindings/iio/imu/bmi160.yaml
> +++ b/Documentation/devicetree/bindings/iio/imu/bmi160.yaml
> @@ -46,6 +46,21 @@ properties:
> set if the specified interrupt pin should be configured as
> open drain. If not set, defaults to push-pull.
>
> + vdd-supply:
> + maxItems: 1
> + description: |
> + an optional regulator that needs to be on to provide VDD power to
> + the sensor.
They aren't optional. Whether we specify them or rely on stub regulators
being provided because they aren't controllable is the optional bit.
That's clearly defined by them not being in the required list below.
So say something li.e
description: |
provide VDD power to the sensor.
> +
> + vddio-supply:
> + maxItems: 1
> + description: |
> + an optional regulator that needs to be on to provide the VDD IO power to
> + the sensor.
> +
> + mount-matrix:
> + description: an optional 3x3 mounting rotation matrix
> +
> required:
> - compatible
> - reg
> @@ -61,9 +76,15 @@ examples:
> bmi160@68 {
> compatible = "bosch,bmi160";
> reg = <0x68>;
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> interrupt-parent = <&gpio4>;
> interrupts = <12 1>;
> interrupt-names = "INT1";
> + mount-matrix = "0", "1", "0",
> + "-1", "0", "0",
> + "0", "0", "1";
> + };
> };
> - |
> // Example for SPI
