Introduce error checks for the clk_enable calls used in this driver. As part of the changes, move clk_enable/clk_disable calls out of ingenic_adc_set_config and into respective logic of its callers. Signed-off-by: Artur Rojek <contact@xxxxxxxxxxxxxx> Tested-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> --- Changes: v6: new patch v7: no change drivers/iio/adc/ingenic-adc.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c index 39c0a609fc94..6c3bbba7c44b 100644 --- a/drivers/iio/adc/ingenic-adc.c +++ b/drivers/iio/adc/ingenic-adc.c @@ -73,7 +73,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc, { uint32_t cfg; - clk_enable(adc->clk); mutex_lock(&adc->lock); cfg = readl(adc->base + JZ_ADC_REG_CFG) & ~mask; @@ -81,7 +80,6 @@ static void ingenic_adc_set_config(struct ingenic_adc *adc, writel(cfg, adc->base + JZ_ADC_REG_CFG); mutex_unlock(&adc->lock); - clk_disable(adc->clk); } static void ingenic_adc_enable(struct ingenic_adc *adc, @@ -124,6 +122,8 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev, long m) { struct ingenic_adc *adc = iio_priv(iio_dev); + struct device *dev = iio_dev->dev.parent; + int ret; switch (m) { case IIO_CHAN_INFO_SCALE: @@ -131,6 +131,14 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev, case INGENIC_ADC_BATTERY: if (!adc->soc_data->battery_vref_mode) return -EINVAL; + + ret = clk_enable(adc->clk); + if (ret) { + dev_err(dev, "Failed to enable clock: %d\n", + ret); + return ret; + } + if (val > JZ_ADC_BATTERY_LOW_VREF) { ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_BAT_MD, @@ -142,6 +150,9 @@ static int ingenic_adc_write_raw(struct iio_dev *iio_dev, JZ_ADC_REG_CFG_BAT_MD); adc->low_vref_mode = true; } + + clk_disable(adc->clk); + return 0; default: return -EINVAL; @@ -317,6 +328,13 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc, int *val) { int bit, ret, engine = (chan->channel == INGENIC_ADC_BATTERY); + struct device *dev = iio_priv_to_dev(adc)->dev.parent; + + ret = clk_enable(adc->clk); + if (ret) { + dev_err(dev, "Failed to enable clock: %d\n", ret); + return ret; + } /* We cannot sample AUX/AUX2 in parallel. */ mutex_lock(&adc->aux_lock); @@ -325,7 +343,6 @@ static int ingenic_adc_read_chan_info_raw(struct ingenic_adc *adc, ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_AUX_MD, bit); } - clk_enable(adc->clk); ret = ingenic_adc_capture(adc, engine); if (ret) goto out; -- 2.26.2