Re: [PATCH] iio: dac: vf610_dac: Replace indio_dev->mlock with own device lock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 14 May 2020 11:58:15 +0300
Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx> wrote:

> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
> 
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>

Applied, thanks,

Jonathan

> ---
>  drivers/iio/dac/vf610_dac.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/dac/vf610_dac.c b/drivers/iio/dac/vf610_dac.c
> index 71f8a5c471c4..c1e15ede0e8e 100644
> --- a/drivers/iio/dac/vf610_dac.c
> +++ b/drivers/iio/dac/vf610_dac.c
> @@ -36,6 +36,7 @@ struct vf610_dac {
>  	struct device *dev;
>  	enum vf610_conversion_mode_sel conv_mode;
>  	void __iomem *regs;
> +	struct mutex lock;
>  };
>  
>  static void vf610_dac_init(struct vf610_dac *info)
> @@ -64,7 +65,7 @@ static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
>  	struct vf610_dac *info = iio_priv(indio_dev);
>  	int val;
>  
> -	mutex_lock(&indio_dev->mlock);
> +	mutex_lock(&info->lock);
>  	info->conv_mode = mode;
>  	val = readl(info->regs + VF610_DACx_STATCTRL);
>  	if (mode)
> @@ -72,7 +73,7 @@ static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
>  	else
>  		val &= ~VF610_DAC_LPEN;
>  	writel(val, info->regs + VF610_DACx_STATCTRL);
> -	mutex_unlock(&indio_dev->mlock);
> +	mutex_unlock(&info->lock);
>  
>  	return 0;
>  }
> @@ -147,9 +148,9 @@ static int vf610_write_raw(struct iio_dev *indio_dev,
>  
>  	switch (mask) {
>  	case IIO_CHAN_INFO_RAW:
> -		mutex_lock(&indio_dev->mlock);
> +		mutex_lock(&info->lock);
>  		writel(VF610_DAC_DAT0(val), info->regs);
> -		mutex_unlock(&indio_dev->mlock);
> +		mutex_unlock(&info->lock);
>  		return 0;
>  
>  	default:
> @@ -205,6 +206,8 @@ static int vf610_dac_probe(struct platform_device *pdev)
>  	indio_dev->channels = vf610_dac_iio_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels);
>  
> +	mutex_init(&info->lock);
> +
>  	ret = clk_prepare_enable(info->clk);
>  	if (ret) {
>  		dev_err(&pdev->dev,




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux