On Thu, 14 May 2020 12:19:38 +0300
Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx> wrote:
> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
Applied,
Thanks,
Jonathan
> ---
> drivers/iio/dac/ad5686.c | 10 ++++++----
> drivers/iio/dac/ad5686.h | 2 ++
> 2 files changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c
> index e06b29c565b9..8dd67da0a7da 100644
> --- a/drivers/iio/dac/ad5686.c
> +++ b/drivers/iio/dac/ad5686.c
> @@ -127,9 +127,9 @@ static int ad5686_read_raw(struct iio_dev *indio_dev,
>
> switch (m) {
> case IIO_CHAN_INFO_RAW:
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = st->read(st, chan->address);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> if (ret < 0)
> return ret;
> *val = (ret >> chan->scan_type.shift) &
> @@ -157,12 +157,12 @@ static int ad5686_write_raw(struct iio_dev *indio_dev,
> if (val > (1 << chan->scan_type.realbits) || val < 0)
> return -EINVAL;
>
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> ret = st->write(st,
> AD5686_CMD_WRITE_INPUT_N_UPDATE_N,
> chan->address,
> val << chan->scan_type.shift);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
> break;
> default:
> ret = -EINVAL;
> @@ -468,6 +468,8 @@ int ad5686_probe(struct device *dev,
> indio_dev->channels = st->chip_info->channels;
> indio_dev->num_channels = st->chip_info->num_channels;
>
> + mutex_init(&st->lock);
> +
> switch (st->chip_info->regmap_type) {
> case AD5310_REGMAP:
> cmd = AD5686_CMD_CONTROL_REG;
> diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h
> index 70a779939ddb..52009b5eef88 100644
> --- a/drivers/iio/dac/ad5686.h
> +++ b/drivers/iio/dac/ad5686.h
> @@ -117,6 +117,7 @@ struct ad5686_chip_info {
> * @pwr_down_mask: power down mask
> * @pwr_down_mode: current power down mode
> * @use_internal_vref: set to true if the internal reference voltage is used
> + * @lock lock to protect the data buffer during regmap ops
> * @data: spi transfer buffers
> */
>
> @@ -130,6 +131,7 @@ struct ad5686_state {
> ad5686_write_func write;
> ad5686_read_func read;
> bool use_internal_vref;
> + struct mutex lock;
>
> /*
> * DMA (thus cache coherency maintenance) requires the
