On Thu, 14 May 2020 12:12:12 +0300
Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx> wrote:
> As part of the general cleanup of indio_dev->mlock, this change replaces
> it with a local lock on the device's state structure.
>
> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing.
Thanks,
Jonathan
> ---
> drivers/iio/dac/ad5764.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/dac/ad5764.c b/drivers/iio/dac/ad5764.c
> index f7ab211604a1..5b0f0fe354f6 100644
> --- a/drivers/iio/dac/ad5764.c
> +++ b/drivers/iio/dac/ad5764.c
> @@ -46,6 +46,7 @@ struct ad5764_chip_info {
> * @spi: spi_device
> * @chip_info: chip info
> * @vref_reg: vref supply regulators
> + * @lock lock to protect the data buffer during SPI ops
> * @data: spi transfer buffers
> */
>
> @@ -53,6 +54,7 @@ struct ad5764_state {
> struct spi_device *spi;
> const struct ad5764_chip_info *chip_info;
> struct regulator_bulk_data vref_reg[2];
> + struct mutex lock;
>
> /*
> * DMA (thus cache coherency maintenance) requires the
> @@ -126,11 +128,11 @@ static int ad5764_write(struct iio_dev *indio_dev, unsigned int reg,
> struct ad5764_state *st = iio_priv(indio_dev);
> int ret;
>
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
> st->data[0].d32 = cpu_to_be32((reg << 16) | val);
>
> ret = spi_write(st->spi, &st->data[0].d8[1], 3);
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
>
> return ret;
> }
> @@ -151,7 +153,7 @@ static int ad5764_read(struct iio_dev *indio_dev, unsigned int reg,
> },
> };
>
> - mutex_lock(&indio_dev->mlock);
> + mutex_lock(&st->lock);
>
> st->data[0].d32 = cpu_to_be32((1 << 23) | (reg << 16));
>
> @@ -159,7 +161,7 @@ static int ad5764_read(struct iio_dev *indio_dev, unsigned int reg,
> if (ret >= 0)
> *val = be32_to_cpu(st->data[1].d32) & 0xffff;
>
> - mutex_unlock(&indio_dev->mlock);
> + mutex_unlock(&st->lock);
>
> return ret;
> }
> @@ -295,6 +297,8 @@ static int ad5764_probe(struct spi_device *spi)
> indio_dev->num_channels = AD5764_NUM_CHANNELS;
> indio_dev->channels = st->chip_info->channels;
>
> + mutex_init(&st->lock);
> +
> if (st->chip_info->int_vref == 0) {
> st->vref_reg[0].supply = "vrefAB";
> st->vref_reg[1].supply = "vrefCD";
