The bma180 driver is being extended to support the bma150.
Its temperature channel is unsigned so the center_temp naming
no longer makes.
Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
---
drivers/iio/accel/bma180.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 19d4f174a890..23da0a79b0c4 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -50,7 +50,7 @@ struct bma180_part_info {
unsigned int num_scales;
const int *bw_table;
unsigned int num_bw;
- int center_temp;
+ int temp_offset;
u8 int_reset_reg, int_reset_mask;
u8 sleep_reg, sleep_mask;
@@ -584,7 +584,7 @@ static int bma180_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
case IIO_CHAN_INFO_OFFSET:
- *val = data->part_info->center_temp;
+ *val = data->part_info->temp_offset;
return IIO_VAL_INT;
default:
return -EINVAL;
@@ -761,7 +761,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.bw_table = bma023_bw_table,
.num_bw = ARRAY_SIZE(bma023_bw_table),
/* No temperature channel */
- .center_temp = 0,
+ .temp_offset = 0,
.int_reset_reg = BMA023_CTRL_REG0,
.int_reset_mask = BMA023_INT_RESET_MASK,
.sleep_reg = BMA023_CTRL_REG0,
@@ -789,7 +789,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.num_scales = ARRAY_SIZE(bma180_scale_table),
.bw_table = bma180_bw_table,
.num_bw = ARRAY_SIZE(bma180_bw_table),
- .center_temp = 48, /* 0 LSB @ 24 degree C */
+ .temp_offset = 48, /* 0 LSB @ 24 degree C */
.int_reset_reg = BMA180_CTRL_REG0,
.int_reset_mask = BMA180_RESET_INT,
.sleep_reg = BMA180_CTRL_REG0,
@@ -816,7 +816,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.num_scales = ARRAY_SIZE(bma25x_scale_table),
.bw_table = bma25x_bw_table,
.num_bw = ARRAY_SIZE(bma25x_bw_table),
- .center_temp = 48, /* 0 LSB @ 24 degree C */
+ .temp_offset = 48, /* 0 LSB @ 24 degree C */
.int_reset_reg = BMA250_INT_RESET_REG,
.int_reset_mask = BMA250_INT_RESET_MASK,
.sleep_reg = BMA250_POWER_REG,
@@ -845,7 +845,7 @@ static const struct bma180_part_info bma180_part_info[] = {
.num_scales = ARRAY_SIZE(bma25x_scale_table),
.bw_table = bma25x_bw_table,
.num_bw = ARRAY_SIZE(bma25x_bw_table),
- .center_temp = 46, /* 0 LSB @ 23 degree C */
+ .temp_offset = 46, /* 0 LSB @ 23 degree C */
.int_reset_reg = BMA254_INT_RESET_REG,
.int_reset_mask = BMA254_INT_RESET_MASK,
.sleep_reg = BMA254_POWER_REG,
--
2.20.1
